The effect of interference-fit on fretting fatigue crack initiation and ΔK of a single pinned plate in 7075 Al-alloy

Engineering Fracture Mechanics

Volumn 78, Issue 6, 2011, Pages 1233-1246

  Mirzajanzadeh, M ^a   Chakherlou, T N ^a   Vogwell, J ^b  

^a UNIVERSITY OF TABRIZ   (Iran)

^b University of Bath   (United Kingdom)

Author keywords

Fatigue life; Finite element; Fretting; Interference fit; Stress intensity factor

Indexed keywords

7075-T6; AL-ALLOY; CONTACT INTERFACE; CRACK NUCLEATION; CYCLIC STRESS; ELASTIC-PLASTIC FINITE ELEMENT MODEL; FATIGUE LIFE; FINITE ELEMENT; FINITE ELEMENT MODELS; FRETTING; FRETTING FATIGUE CRACKS; FRICTION COEFFICIENTS; INTERFERENCE FIT; INTERFERENCE RATIO;

ALUMINUM; CERIUM ALLOYS; CRACK INITIATION; FATIGUE CRACK PROPAGATION; FATIGUE OF MATERIALS; FINITE ELEMENT METHOD; FRETTING CORROSION; FRICTION; STRESS CONCENTRATION; STRESS CORROSION CRACKING; STRESS INTENSITY FACTORS; THREE DIMENSIONAL;

CRACKS;

EID: 79953027761     PISSN: 00137944     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.engfracmech.2011.01.006     Document Type: Article

References (26)

1. Chakherlou T.N., Vogwell J. The effect of cold expansion on improving the fatigue life of fastener holes. Eng Fail Anal 2003, 10:13-24.
2. Chakherlou T.N., Vogwell J. A novel method of cold expansion which creates near-uniform compressive tangential residual stress around a fastener. Fatigue Fract Engng Mater Struct 2004, 27:343-351.
3. Chakherlou TN, Mirzajanzadeh M, Vogwell J, Abazadeh B. Investigation of the fatigue life and crack growth in torque tightened bolted joints. Aerosp Sci Technol; 2010. doi: doi:10.1016/j.ast.2010.08.003.
4. Chakherlou T.N., Mirzajanzadeh M., Abazadeh B., Saeedi Kh An investigation about interference fit effect on improving fatigue life of a holed single plate in joints. Eur J Mech A Solids 2010, 29(4):675-682.
5. Chakherlou T.N., Mirzajanzadeh, Saeedi Kh Fatigue crack growth and life prediction of a single interference fitted holed plate. Fatigue Fract Engng Mater Struct 2010, 33(10):633-644.
6. Mirzajanzadeh M. An investigation about the effect of interference fit on improving fatigue life of double shear lap joint, MSc thesis supervised by Chakherlou TN. Iran: The University of Tabriz; 2008 (Persian).
7. Chakherlou T.N., Mirzajanzadeh M., Vogwell J. Experimental and numerical investigations into the effect of an interference fit on the fatigue life of double shear lap joints. Eng Fail Anal 2009, 16:2066-2080.
8. Chakherlou TN, Mirzajanzadeh M, Hasani Gangaraj SM. Interference fit effect on the stress intensity factor of the through thickness cracked holed plates. In: 16th international annual conference on mechanical engineering, ISME2008. Iran: The University of Bahonar-Kerman; 2008 (Persian).
9. John H, Crews Jr. Analytical and experimental investigation of fatigue in a sheet specimen with an interference-fit bolt. NASA Langley Research Center Hampton, Va. 23665; 1975.
10. Majzoobi G.H., Nemati J., NovinRooz A.J., Farrahi G.H. Modification of fretting fatigue behavior of AL7075-T6 alloy by the application of titanium coating using IBED technique and shot peening. Tribol Int 2009, 42:121-129.
11. Murthy H, Mseis G, Farris TN. Life estimation of Ti-6Al-4V specimens subjected to fretting fatigue and effect of surface treatments. Tribol Int doi: doi:10.1016/j.triboint.2009.04.013.
12. Golden P.J., Calcaterra J.R. A fracture mechanics life prediction methodology applied to dovetail fretting. Tribol Int 2006, 39:1172-1180.
13. Madge J.J., Leen S.B., Shipway P.H. A combined wear and crack nucleation-propagation methodology for fretting fatigue prediction. Int J Fatigue 2008, 30(9):1509-1528.
14. Fadag H.A., Mall S., Jain V.K. A finite element analysis of fretting fatigue crack growth behavior in Ti-6Al-4V. Eng Fract Mech 2008, 75:1384-1399.
15. Nowell D., Dini D. Stress gradient effects in fretting fatigue. Tribol Int 2003, 36:71-78.
16. Chakherlou T.N., Mirzajanzadeh M., Vogwell J. Effect of hole lubrication on the fretting fatigue life of double shear lap joints: an experimental and numerical study. Eng Fail Anal 2009, 16:2388-2399.
17. Swanson Analysis Systems Inc. ANSYS, Revision 10.
18. Poussard M.J., Pavier X., Smith D.J. Analytical and finite element predictions of residual stresses in cold worked fastener holes. J Strain Anal Eng Des 1995, 30(4):291-304.
19. Dowling N.E. Mechanical behavior of materials 1999, Prentice-Hall, [Chapter 14]. 2nd ed.
20. Lin X.B., Smith R.A. Stress intensity factors for corner cracks emanating from fastener holes under tension. Eng Fract Mech 1999, 62:535-553.
21. Newman JC, Raju IS. Stress intensity factor equations for cracks in three-dimensional finite bodies subjected to tension and bending loads. In: Atluri SN, editor. Computational methods in the mechanics of fracture. Elsevier Science Publisher; 1986. p. 311-34.
22. Newman J.C., Raju I.S. Stress intensity factor for two symmetric corner cracks. ASTM STP 1979, 677:411-430.
23. Barsoum R.S. On the use of isoparametric finite elements in linear fracture mechanics. Int J Numer Method Eng 1976, 10:25-37.
24. Alegre J.M., Gutiérrez-Solana F., Aragón A. A finite element simulation methodology of the fatigue behaviour of punched and drilled plate components. Eng Fail Anal 2004, 11(5):737-750.
25. Araújo J.A., Susmel L., Taylor D., Ferro J.C.T., Ferreira J.L.A. On the prediction of high-cycle fretting fatigue strength: theory of critical distances vs. hot-spot approach. Eng Fract Mech 2008, 75:1763-1778.
26. Lacarac V., Smith D.J., Pavier M.J., Priest M. Fatigue crack growth from plain and cold expanded holes in aluminium alloys. Int J Fatigue 2000, 22:189-203.