Some analytical results on transmission errors in narrow-faced spur and helical gears: Influence of profile modifications

Journal of Mechanical Design

Volumn 133, Issue 3, 2011, Pages

  Velex, P ^a   Bruyre J ^a   Houser, D R ^b  

^a UNIVERSITÉ DE LYON   (France)

^b The Ohio State University   (United States)

Author keywords

analytical results; gear; modifications; profile relief; transmission error

Indexed keywords

FOURIER SERIES; HELICAL GEARS;

ANALYTICAL RESULTS; APPROXIMATE ANALYTICAL RESULTS; CONTACT RATIO; MODIFICATION; PROFILE MODIFICATION; PROFILE RELIEF; QUASI-STATIC; STATIC TRANSMISSION ERRORS; THEORETICAL DEVELOPMENT; TRANSMISSION ERROR;

SPUR GEARS;

EID: 79952807730     PISSN: 10500472     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.4003578     Document Type: Article

References (35)

1. Walker, H., 1938, "Gear Tooth Deflection and Profile Modification, " Engineer, 166, pp. 434-436.
2. Niemann, G., and Baethge, J., 1970, "Drehwegfehler, Zahnfederhärte und Geräusch bei Stirnrädern, " VDI-Z, 112, pp. 205-276.
3. Gregory, R. W., Harris, S. L., and Munro, R. G., 1963, "Dynamic Behavior of Spur Gears, " Proc. Inst. Mech. Eng. Int. Conf. Gearing, 178, pp. 261-266.
4. Terauchi, Y., Nadano, H., and Nohara, M., 1982, "On the Effect of the Tooth Profile Modification on the Dynamic Load and the Sound Level of a Spur Gear, " Bull. JSME, 25(207), pp. 1474-1481.
5. Sato, T., Umezawa, K., and Ishikawa, J., 1983, "Effects of Contact Ratio and Profile Correction on Gear Rotational Vibration, " Bull. JSME, 26(221), pp. 2010-2016. (Pubitemid 14502292)
6. Smith, J. D., 1983, Gears and Their Vibration, Marcel Dekker, New York/London.
7. Tavakoli, M., and Houser, D. R., 1986, "Optimum Profile Modifications for the Minimization of Static Transmission Errors of Spur Gears, " ASME J. Mech., Transm., Autom. Des., 108, pp. 86-95. (Pubitemid 16508461)
8. Houser, D. R., 1991, "Gear Noise, " Dudley's Gear Handbook, P. S. Townsend, ed., McGraw-Hill, New York, pp. 14.1-14.32, Chap. 14.
9. Lee, C., Lin, H. H., Oswald, F. B., and Townsend, D. P., 1991, "Influence of Linear Profile Modification and Loading Conditions on The Dynamic Tooth Load and Stress of High-Contact-Ratio Spur Gears, " ASME J. Mech. Des., 113(4), pp. 473-480.
10. Munro, R. G., 1990, "A Review of the Theory and Measurement of Gear Transmission Error, " Proceedings of the First International Conference on Gearbox Noise and Vibration, Cambridge, pp. 3-10.
11. Munro, R. G., Yildirim, N., and Hall, D. M., 1990, "Optimum Profile Relief and Transmission Error in Spur Gears, " Proceedings of the First International Conference on Gearbox Noise and Vibration, Cambridge, pp. 35-41.
12. Lin, H. H., Oswald, F. B., and Townsend, D. P., 1994, "Dynamic Loading of Spur Gears With Linear or Parabolic Tooth Profile Modifications, " Mech. Mach. Theory, 29(8), pp. 1115-1129.
13. Matsumura, S., Umezawa, K., and Houjoh, H., 1996, "Performance Diagram of a Helical Gear Pair Having Tooth Surface Deviation During Transmission on Light Load, " Proceedings of the Seventh ASME International Power Transmission and Gearing Conference, San Diego, Oct. 6-9, pp. 161-168. (Pubitemid 126517289)
14. Velex, P., and Maatar, M., 1996, "A Mathematical Model for Analyzing the Influence of Shape Deviations and Mounting Errors on Gear Dynamics, " J. Sound Vib., 191(5), pp. 629-660. (Pubitemid 126368450)
15. Maatar, M., and Velex, P., 1997, "Quasi-Static and Dynamic Analysis of Narrow-Faced Helical Gears With Profile and Lead Modifications, " ASME J. Mech. Des., 119(4), pp. 474-480. (Pubitemid 127709768)
16. Umeyama, M., Kato, M., and Inoue, K., 1998, "Effects of Gear Dimensions and Tooth Surface Modifications on the Loaded Transmission Error of a Helical Gear Pair, " ASME J. Mech. Des., 120(1), pp. 119-125. (Pubitemid 128652149)
17. Yildirim, N., and Munro, R. G., 1999, "A Systematic Approach to Profile Relief Design of Low and High Contact Ratio Spur Gears, " Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 213(6), pp. 551-562.
18. Yildirim, N., and Munro, R. G., 1999, "A New Type of Profile Relief for High Contact Ratio Spur Gears, " Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 213(6), pp. 563-568.
19. Kahraman, A., and Blankenship, G. W., 1999, "Effect of Involute Tip Relief on Dynamic Response of Spur Gears, " ASME J. Mech. Des., 121(2), pp. 313-315.
20. Velex, P., and Ajmi, M., 2006, "On the Modelling of Excitations in Geared Systems by Transmissions Errors, " J. Sound Vib., 290 (3-5), pp. 882-909. (Pubitemid 43006048)
21. Mohamad, E. N., Komori, M., Murakami, H., Kubo, A., and Fang, S., 2009, "Analysis of General Characteristics of Transmission Error of Gears With Convex Modification of Tooth Flank Form Considering Elastic Deformation Under Load, " ASME J. Mech. Des., 131(6), p. 061015.
22. Houser, D. R., Harianto, J., Iyer, N., Josephson, J., and Chandrasekaren, B., 2000, "A Multi-Variable Approach to Determining the 'Best' Gear Design, " Proceedings of the Eighth ASME International Power Transmission and Gearing Conference, Baltimore, Sep. 10-13.
23. Sundaresan, S., Ishii, K., and Houser, D. R., 1991, "A Procedure Using Manufacturing Variance to Design Gears With Minimum Transmission Error, " ASME J. Mech. Des., 113(3), pp. 318-325.
24. Sundaresan, S., Ishii, K., and Houser, D. R., 1991, "Design Optimization for Robustness Using Performance Simulation Programs, " Proceedings of ASME Advances in Design Automation Conference, DE-Vol. 32-1, pp. 249-256.
25. Maatar, M., and Velex, P., 1996, "An Analytical Expression of the Time-Varying Contact Length in Perfect Cylindrical Gears-Some Possible Applications in Gear Dynamics, " ASME J. Mech. Des., 118(4), pp. 586-589. (Pubitemid 126664006)
26. Velex, P., and Ville, F., 2009, "An Analytical Approach to Tooth Friction Losses in Spur and Helical Gears-Influence of Profile Modifications, " ASME J. Mech. Des., 131(10), p. 101008.
27. Velex, P., Maatar, M., and Octrue, M., 1995, "Loaded Transmission Error Predictions and Measurements on Spur Gears With Profile Relief, " Proceedings of IMechE, Gearbox Noise, Vibration and Diagnostics International Conference, Londres, pp. 199-208.
28. Baud, S., and Velex, P., 2002, "Static and Dynamic Tooth Loading in Spur and Helical Geared Systems-Experiments and Model Validation, " ASME J. Mech. Des., 124(2), pp. 334-346. (Pubitemid 35202484)
29. Ajmi, M., and Velex, P., 2002, "Multi-Criterion Design of Tooth Modifications on High-Contact-Ratio Spur Gears, " VDI, Proceedings of the International Conference on Gear, Münich, Vol. 2, pp. 737-749.
30. Weber, C., and Banaschek, K., 1953, Formänderung und Profilrücknahme bei Gerad-und Schrägverzahnten Antriebstechnik, Vieweg, Braunschweig, Vol. 11.
31. Lundberg, G., 1939, "Elastische Berührung zweier Halbraüme, " Forsch. Geb. Ingenieurwes., 10(5), pp. 201-211.
32. Conry, T. F., and Seireg, A., 1971, "A Mathematical Programming Method for Design for Elastic Bodies in Contact, " ASME J. Appl. Mech., 38, pp. 1293-1307.
33. Conry, T. F., and Seireg, A., 1973, "A Mathematical Programming Technique for the Evaluation of Load Distribution and Optimal Modifications for Gear Systems, " ASME J. Eng. Ind., 95, pp. 1115-1122.
34. Houser, D. R., Bolze, V. M., and Graber, J. M., 1996, "Static and Dynamic Transmission Error Measurements and Predictions for Spur and Helical Gear Sets, " Proceedings of the Seventh ASME International Power Transmission and Gearing Conference, San Diego, pp. 365-372.
35. Vinayak, H., and Houser, D. R., 1992, "A Comparison of Analytical Prediction With Experimental Measurements of Transmission Error of Misaligned Loaded Gears, " Proceedings of the Sixth ASME International Power Transmission and Gearing Conference, Phoenix, pp. 11-19.