Predicting microfibril angle in Eucalyptus wood from different wood faces and surface qualities using near infrared spectra

Journal of Near Infrared Spectroscopy

Volumn 18, Issue 6, 2010, Pages 455-464

  Hein, Paulo R G ^a   Clair, Bruno ^b   Brancheriau, Loïc ^a   Chaix, Gilles ^a  

^a CIRAD   (France)

^b CNRS   (France)

Author keywords

Eucalyptus urophylla S.T. Blake; Microfibril angle; NIR calibration; Surface quality; Wood phenotyping; X ray diffraction

Indexed keywords

INFRARED DEVICES; NEAR INFRARED SPECTROSCOPY; REGRESSION ANALYSIS; SHRINKAGE; SURFACE PROPERTIES; X RAY DIFFRACTION;

CRYSTALLINE CELLULOSE; EUCALYPTUS UROPHYLLA S.T. BLAKE; EXPERIMENTAL CONDITIONS; LONGITUDINAL SHRINKAGE; MICROFIBRIL ANGLES; NEAR INFRARED SPECTRA; PARTIAL LEAST-SQUARE REGRESSION; PHENOTYPING;

WOOD;

EID: 79952340893     PISSN: 09670335     EISSN: None     Source Type: Journal    
DOI: 10.1255/jnirs.905     Document Type: Article

References (41)

1. S.-Z. Fang, W.-Z. Yang and Y. Tian, "Clonal and within-tree variation in microfibril angle in poplar clones", New Forests 31, 373 (2006). doi: 10.1007/s11056-005-8679-7 (Pubitemid 43724228)
2. S. Andersson, R. Serimaa, M. Torkkeli, T. Paakkari, P. Saranpfifi and E. Pesonen, "Microfibril angle of Norway spruce [Picea abies (L.) Karst.] compression wood: comparison of measuring techniques", J. Wood Sci. 46, 343 (2000). doi: 10.1007/BF00776394 (Pubitemid 37292410)
3. C.A. Raymond, "Genetics of Eucalyptus wood properties", Ann. For. Sci. 59, 525 (2002). doi: 10.1051/forest:2002037
4. L.R. Schimleck, E. Sussenbach, G. Leaf, P.D. Jones and C.L. Huang, "Microfibril angle prediction of Pinus taeda wood samples based on tangential face NIRspectra", IAWA J. 28, 1 (2007).
5. L. Donaldson, "Microfibril angle: measurement, variation and relationships-a review", IAWA J. 29, 345 (2008).
6. R. Evans, S.A. Stuart and J. Van der Touw, "Microfibril angle scanning of increment cores by X-ray diffractometry", Appita J. 49, 411 (1996).
7. R. Evans, "Avariance approach to the x-ray diffractometric estimation of microfibril angle in wood", Appita J. 52, 283 (1999).
8. R. Washusen and R. Evans, "The association between cellulose crystallite width and tension wood occurrence in Eucalyptus globulus", IAWA J. 22, 235 (2001).
9. B. Clair, T. Alméras, H. Yamamoto, T. Okuyama and J. Sugiyama, "Mechanical behaviour of cellulose microfibrils in tension wood, in relation with maturation stress generation", Biophys. J. 91, 1128 (2006). doi: 10.1529/biophysj.105.078485 (Pubitemid 44161944)
10. L.R. Schimleck, R. Evans and J. Ilic, "Estimation of Eucalyptus delegatensis wood properties by near infrared spectroscopy", Can. J. For. Res. 31, 1671 (2001). doi: 10.1139/cjfr-31-10-1671
11. L.R. Schimleck, R. Evans and J. Ilic, "Application of near infrared spectroscopy to a diverse range of species demonstrating wide density and stiffness variation", IAWA J. 22, 415 (2001).
12. L.R. Schimleck and R. Evans, "Estimation of microfibril angle of increment cores by near infrared spectroscopy", IAWA J. 23, 225 (2002).
13. L.R. Schimleck, C. Mora and R.F. Daniels, "Estimation of the physical wood properties of green Pinus taeda radial samples by near infrared spectroscopy", Can. J. For. Res. 33, 2297 (2003). doi: 10.1139/x03-173 (Pubitemid 38390531)
14. R.P. Cogdill, L.R. Schimleck, P.D. Jones, G.F. Peter, R.F. Daniels and A. Clark, "Estimation of the physical wood properties of Pinus taeda L. radial strips using least square support vector machines", J. Near Infrared Spectrosc. 12, 263 (2004). doi: 10.1255/jnirs.434
15. L.R. Schimleck, R. Stürzenbecher, P.D. Jones and R. Evans, "Development of wood property calibrations using near infrared spectra having different spectral resolutions", J. Near Infrared Spectrosc. 12, 55 (2004). doi: 10.1255/jnirs.407
16. L.R. Schimleck, R. Evans, P.D. Jones, R.F. Daniels, G.F. Peter and A. Clark, III, "Estimation of microfibril angle and stiffness by near infrared spectroscopy using sample sets having limited wood density variation", IAWA J. 26, 175 (2005).
17. L.R. Schimleck, R. Stürzenbecher, C. Mora, P.D. Jones and R.F. Daniel, "Comparison of Pinus taeda L. wood property calibrations based on NIRspectra from the radial-longitudinal and radial-transverse faces of wooden strips", Holzforschung 59, 214 (2005). doi: 10.1515/HF.2005.034 (Pubitemid 40335853)
18. L.R. Schimleck, P.D. Jones, G.F. Peter, R.FDaniels and A. Clark, III, "Success in using near infrared spectroscopy to estimate wood properties of Pinus taeda radial strips not due to autocorrelation", J. Near Infrared Spectrosc. 13, 47 (2005). doi: 10.1255/jnirs.456
19. P.D. Jones, L.R. Schimleck, G.F. Peter, R.F. Daniels and A. Clark, III, "Nondestructive estimation of Pinus taeda L. wood properties for samples from a wide range of sites in Georgia", Can. J. For. Res. 35, 85 (2005). doi: 10.1139/x04-160 (Pubitemid 40743195)
20. L.R. Schimleck, G.M. Downes and R. Evans, "Estimation of Eucalyptus nitens wood properties by near infrared spectroscopy", Appita J. 59, 136 (2006).
21. L.R. Schimleck, J.A. Tyson, P.D. Jones, G.F. Peter, R.FDaniels and A. Clark, III, "Pinus taeda L. wood property calibrations based on variable numbers of near infrared spectra per core and cores per plantation", J. Near Infrared Spectrosc. 15, 261 (2007). doi: 10.1255/jnirs.738
22. P.D. Jones, L.R. Schimleck, C.-L. So, A. Clark, III and R.F. Daniels, "High resolution scanning of radial strips cut from increment cores by near infrared spectroscopy", IAWA J. 28, 473 (2007).
23. F. Antony, L. Jordan, L.R. Schimleck, R.F. Daniels and A. Clark, III, "The effect of mid-rotation fertilization on the wood properties of loblolly pine (Pinus taeda)", IAWA J. 30, 49 (2009).
24. A. Huang, F. Fu, B. Fei and Z. Jiang, "Rapid estimation of microfibril angle of increment cores of Chinese fir by near infrared spectroscopy", Chin. For. Sci. Technol. 7, 52 (2008).
25. S.S. Kelley, T.G. Rials, L.R. Groom and C-L. So, "Use of near infrared spectroscopy to predict the mechanical properties of six softwoods", Holzforschung 58, 252 (2004). doi: 10.1515/HF.2004.039
26. S. Tsuchikawa, "Areview of recent near infrared research for wood and paper", Appl. Spectrosc. Rev. 42, 43 (2007). doi: 10.1080/ 05704920601036707 (Pubitemid 44890665)
27. P.R.G. Hein, J.T. Lima and G. Chaix, "Robustness of models based on near infrared spectra to predict the basic density in Eucalyptus urophylla wood", J. Near Infrared Spectrosc. 17, 141 (2009). doi: 10.1255/jnirs.833
28. P.R.G. Hein, J.T. Lima and G. Chaix, "Effects of sample preparation on NIRspectroscopic estimation of chemical properties of Eucalyptus urophylla S.T. Blake wood", Holzforschung 64, 45 (2010). doi: 10.1515/HF.2010.011
29. I.D. Cave, "Theory of X-ray measurement of microfibril angle in wood", For. Prod. J. 16, 37 (1966).
30. H. Yamamoto, T. Okuyama and M. Yashida, "Method of determining the mean microfibril angle of wood over a wide range by the improved Cave's method", Mokuzai Gakkaishi 39, 118 (1993).
31. A. Savitzky and M.J.E. Golay, "Smoothing and differentiation of data by simplified least-squares procedures", Anal. Chem. 36, 1627 (1964). doi: 10.1021/ac60214a047
32. F. Westad and H. Martens, "Variable selection in near infrared spectroscopy based on significance testing in partial least square regression", J. Near Infrared Spectrosc. 8, 117 (2000). doi: 10.1255/jnirs.271
33. American Association of Cereal Chemists, AACC Method 39-00. American Association of Cereal Chemists, p. 15, (1999).
34. T. Fujimoto, Y. Kurata, K. Matsumoto and S. Tsuchikawa, "Application of near infrared spectroscopy for estimating wood mechanical properties of small clear and full length lumber specimens", J. Near Infrared Spectrosc. 16, 529 (2008). doi: 10.1255/jnirs.818
35. C.R. Mora and L.R. Schimleck, "On the selection of samples for multivariate regression analysis: application to near-infrared (NIR) calibration models for the prediction of pulp yield in Eucalyptus nitens", Can. J. For. Res. 38, 2626 (2008). doi: 10.1139/X08-099
36. J.J. Workman and L. Weyer, Practical Guide to Interpretive Near-Infrared Spectroscopy. CRCPress, Boca Raton, Florida, USA, p. 332 (2007).
37. K. Jungnikl, G. Koch and I. Burgert, "Acomprehensive analysis of the relation of cellulose microfibril orientation and lignin content in the S2 layer of different tissue types of spruce wood [Picea abies (L.) Karst.]", Holzforschung 62, 475 (2008). doi: 10.1515/HF.2008.079 (Pubitemid 351799299)
38. B.K. Via, C.L. So, T.F. Shupe, L.H. Groom and J. Wikaira, "Mechanical response of longleaf pine to variation in microfibril angle, chemistry associated wavelengths, density, and radial position", Composites: Part A 40, 60 (2009). doi: 10.1016/j.compositesa.2008.10.007
39. J.R. Barnett and V.A. Bonham, "Cellulose microfibril angle in the cell wall of wood fibres", Biol. Rev. 79, 461 (2004). doi: 10.1017/S1464793103006377 (Pubitemid 38691099)
40. H. Baillères, B. Chanson, M. Fournier, M.T. Tollier and B. Monties, "Structure, composition chimique et retraits de maturation du bois chez les clones d'Eucalyptus", Ann. For. Sci. 52, 157 (1995). doi: 10.1051/forest:19950206
41. J.T. Lima, M.C. Breese and C.M Cahalan, "Variation in microfibril angle in Eucalyptus clones", Holzforschung 58, 160 (2004). doi: 10.1515/HF.2004.024