Recent Development and Applications of Bulk Glassy Alloys

International Journal of Applied Glass Science

Volumn 1, Issue 3, 2010, Pages 273-295

  Inoue, Akihisa ^a   Takeuchi, Akira ^a  

^a TOHOKU UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

DEVELOPMENT AND APPLICATIONS; FUNDAMENTAL CONCEPTS; GLASS FORMING ABILITY; PHYSICAL AND MECHANICAL PROPERTIES; STRUCTURE AND PHYSICAL PROPERTIES; SUPERCOOLD LIQUIDS; SUPERCOOLED LIQUID REGION; TI-BASED BULK GLASSY ALLOYS;

ALLOYING; ALLOYS; CERIUM ALLOYS; COPPER ALLOYS; MECHANICAL PROPERTIES; METALLIC GLASS; NICKEL; TITANIUM ALLOYS; ZIRCONIUM;

GLASS;

EID: 79951679667     PISSN: 20411286     EISSN: 20411294     Source Type: Journal    
DOI: 10.1111/j.2041-1294.2010.00019.x     Document Type: Article

References (101)

1. 20 Alloy by a Metallic Mold Casting Method, " Mater. Trans., JIM, 31, 425-428 (1990).
2. A. Inoue, "High Strength Bulk Amorphous Alloys with Low Critical Cooling Rates, " Mater. Trans., JIM, 36, 866-875 (1995).
3. W. L. Johnson, "Bulk Glass-Forming Metallic Alloys: Science and Technology, " MRS Bull., 24, 42-56 (1999).
4. A. Inoue, "Stabilization of Metallic Supercooled Liquid and Bulk Amorphous Alloys, " Acta Mater., 48, 279-306 (2000).
5. A. Inoue, "Bulk Amorphous and Nanocrystalline Alloys with High Functional Properties, " Mater. Sci. Eng., A304-306, 1-10 (2001).
6. A. Inoue and B. L. Shen, "New Fe-Based Bulk Glassy Alloys with High Saturated Magnetic Flux Density of 1.4-1.5 T, " Mater. Sci. Eng., A375-377, 302-306 (2004).
7. 30 Alloy of 30mm in Diameter by a Suction Casting Method, " Mater. Trans., 37, 185-187 (1996).
8. 10 Glassy Alloy Rod of 30mm in Diameter by a Cap-Cast Technique, " Mater. Trans., 48, 3190-3192 (2007).
9. W. L. Johnson, "Fundamental Aspects of Bulk Metallic Glass Formation in Multicomponent Alloys, " Mater. Sci. Forum, 225-227, 35-50 (1996).
10. Q. Zheng, J. Xu, and E. Ma, "High Glass-Forming Ability Correlated with Fragility of Mg-Cu(Ag)-Gd Alloys, " J. Appl. Phys., 102, 113519 (2007).
11. R. Li, S. Pang, C. Ma, and T. Zhang, "Influence of Similar Atom Substitution on Glass Formation in (La-Ce)-Al-Co Bulk Metallic Glasses, " Acta Mater., 55, 3719-3726 (2007).
12. Q. K. Jiang, G. Q. Zhang, L. Y. Chen, J. Z. Wu, H. G. Zhang, and J. Z. Jiang, "Glass Formability, Thermal Stability and Mechanical Properties of La-Based Bulk Metallic Glasses, " J. Alloys Comp., 424, 183-186 (2006).
13. Y. Q. Zeng, N. Nishiyama, and A. Inoue, "Development of Ni-Pd-P-B Bulk Metallic Glasses with High Glass-Forming Ability, " Mater. Trans., 50, 1243-1246 (2009).
14. 8 Bulk Metallic Glass with a Diameter of 25mm by Copper Mold Casting, " Mater. Trans., 48, 629-631 (2007).
15. V. Ponnambalam, S. J. Poon, and G. J. Shiflet, "Fe-Based Bulk Metallic Glasses with Diameter Thickness Larger than One Centimeter, " J. Mater. Res., 19, 1320-1323 (2004).
16. K. Amiya and A. Inoue, "Fe-(Cr, Mo)-(C, B)-Tm Bulk Metallic Glasses with High, Strength and High Glass-Forming Ability, " Rev. Adv. Mater. Sci., 18, 27-29 (2008).
17. S. L. Zhu, X. M. Wang, and A. Inoue, "Glass-Forming Ability and Mechanical Properties of Ti-Based Bulk Glassy Alloys with Large Diameters of Up to 1cm, " Intermetallics, 16, 1031-1035 (2008).
18. W. Klement, R. H. Willens, and P. Duwez, "Non-Crystalline Structure in Solidified Gold-Silicon Alloys, " Nature, 187, 869-870 (1960).
19. H. S. Chen, "Glassy Metals, " Rep. Prog. in Phys., 43, 353-432 (1980).
20. H. S. Chen and D. Turnbull, "Formation, Stability and Structure of Palladium-Silicon Based Alloy Glasses, " Acta Metall., 17, 1021-1031 (1969).
21. H. W. Kui, A. L. Greer, and D. Turnbull, "Formation of Bulk Metallic Glass by Fluxing, " Appl. Phys. Lett., 45, 615-616 (1984).
22. 17 Amorphous Alloys upon Annealing, " J. Mater. Sci., 20, 2417-2438 (1985).
23. A. Inoue, K. Ohtera, K. Kita, and T. Masumoto, "New Amorphous Mg-Ce-Ni Alloys with High Strength and Good Ductility, " Jpn. J. Appl. Phys., 27, L2248-L2251 (1988).
24. A. Inoue, T. Zhang, and T. Masumoto, "Al-La-Ni Amorphous Alloys with a Wide Supercooled Liquid Region, " Mater. Trans., JIM, 30, 965-972 (1989).
25. A. Inoue, T. Zhang, and A. Inoue, "Zr-Al-Ni Amorphous Alloys with High Glass Transition Temperature and Significant Supercooled Liquid Region, " Mater. Trans., JIM, 31, 177-183 (1990).
26. A. Inoue, A. Kato, T. Zhang, S. G. Kim, and T. Masumoto, "Mg-Cu-Y Amorphous Alloys with High Mechanical Strengths Produced by a Metallic Mold Casting Method, " Mater. Trans., JIM, 32, 609-616 (1991).
27. N. Nishiyama and A. Inoue, "Stability and Nucleation Behavior of Glass-Forming Pd-Cu-Ni-P Alloy with a Critical Cooling Rate of 0.067 K/s, " Intermetallics, 10, 1141-1147 (2002).
28. 20 Alloy Cylinder of 72mm in Diameter, " Mater. Trans., JIM, 38, 179-183 (1997).
29. Y. He, R. B. Schwarz, and J. I. Archuleta, "Bulk Glass Formation in the Pd-Ni-P System, " Appl. Phys. Lett., 69, 1861-1863 (1996).
30. W. Zhang, F. Jia, Q. S. Zhang, and A. Inoue, "Effects of Additional Ag on the Thermal Stability and Glass-Forming Ability of Cu-Zr Binary Glassy Alloys, " Mater. Sci. Eng., A459, 330-336 (2007).
31. A. Inoue and A. Takeuchi, "Recent Progress in Bulk Glassy Alloys, " Mater. Trans., 43, 1892-1906 (2002).
32. D. Miracle, "A Structural Model for Metallic Glasses, " Nature Mater., 3, 697-702 (2004).
33. H. W. Sheng, W. K. Luo, F. M. Alamgir, J. M. Bai, and E. Ma, "Atomic Packing and Short-to-Medium-Range Order in Metallic Glasses, " Nature, 439, 419-425 (2006).
34. A. R. Yavari, "Materials Science: A New Order for Metallic Glasses, " Nature, 439, 405-406 (2006).
35. D. Miracle, "The Efficient Cluster Packing Model-An Atomic Structural Model for Metallic Glasses, " Acta Mater., 54, 4317-4336 (2006).
36. A. Takeuchi, K. Yubuta, Y. Yokoyama, A. Makino, and A. Inoue, "Noncrystalline Atomic Arrangements Computationally Created from Crystalline Compound by Treating Groups of Atoms as Hypothetical Clusters, " Intermetallics, 16, 283-292 (2008).
37. F. M. Alamgir, H. Jain, D. B. Williams, and R. B. Schwarz, "The Structure of a Metallic Glass System using EXELFS and EXAFS as Complementary Probes, " Micron, 34, 433-439 (2003).
38. W. K. Luo, H. W. Sheng, F. M. Alamgir, J. M. Bai, J. H. He, and E. Ma, "Icosahedral Short-Range Order in Amorphous Alloys, " Phys. Rev. Lett., 92, 145502-1-145502-4 (2004).
39. F. M. Alamgir, H. Jain, A. C. Miller, D. B. Williams, and R. B. Schwarz, "X-Ray Photoelectron Spectroscopy Analysis of Bulk Pd-Ni-P Metallic Glasses, " Phil. Mag., B79, 239-247 (1999).
40. Y. Yokoyama "ARCMG-Advanced Research Center of Metallic Glasses, " IMR, Tohoku University, Sendai, Japan, 2008. Available at http://www.arcmg.imr.tohoku.ac.jp/index2.html (accessed June 20, 2010).
41. A. Peker and W. L. Johnson, "A Highly Processable Metallic Glass: Zr41.2Ti 13.8Cu12.5Ni10.0Be22.5, " Appl. Phys. Lett., 63, 2342-2344 (1993).
42. A. Inoue, T. Zhang, and T. Masumoto, "Preparation of Bulky Amorphous Zr-Al-Co-Ni-Cu Alloys by Copper Mold Casting and Their Thermal and Mechanical Properties, " Mater. Trans., JIM, 36, 391-398 (1995).
43. Q. Zhang, W. Zhang, G. Q. Xie, and A. Inoue, "Unusual Plasticity of the Particulate-Reinforced Cu-Zr-Based Bulk Metallic Glass Composites, " Mater. Trans., 48, 2542-2544 (2007).
44. 10 Glassy Alloy Rod with 32mm in Diameter, " J. Phys.: Conf. Ser., 144, 012043-1-012043-4 (2009).
45. T. Wada et al., "Formation and Bioactivation of Zr-Al-Co Bulk Metallic Glasses, " J. Mater. Res., 24, 2941-2948 (2009).
46. Y. Yokoyama and A. Inoue, "Compositional Dependence of Thermal and Mechanical Properties of Quaternary Zr-Cu-Ni-Al Bulk Glassy Alloys, " Mater. Trans., 48, 1282-1287 (2007).
47. Y. Yokoyama, T. Yamasaki, M. Nishijima, and A. Inoue, "Drastic Increase in the Toughness of Structural Relaxed Hypoeutectic Zr59Cu31Al10 Bulk Glassy Alloy, " Mater. Trans., 48, 1276-1281 (2007).
48. Y. Yokoyama, T. Yamasaki, P. K. Liaw, and A. Inoue, "Study of the Structural Relaxation-Induced Embrittlement of Hypoeutectic Zr-Cu-Al Ternary Bulk Glassy Alloys, " Acta Mater., 56, 6097-6108 (2008).
49. Y. Yokoyama, K. Fujita, A. R. Yavari, and A. Inoue, "Malleable Hypoeutectic Zr-Ni-Cu-Al Bulk Glassy Alloys with Tensile Plastic Elongation at Room Temperature, " Phil. Mag. Lett., 89, 322-334 (2009).
50. 20 Metallic Glass, " Acta Metall., 37, 445-456 (1989).
51. P. E. Donovan and W. M. Stobbs, "The Structure of Shear Bands in Metallic Glasses, " Acta Metall., 29, 1419-1436 (1981).
52. E. Pekarskaya, C. P. Kim, and W. L. Johnson, "In Situ Transmission Electron Microscopy Studies of Shear Bands in a Bulk Metallic Glass Based Composite, " J. Mater. Res., 16, 2513-2518 (2001).
53. B. Yang et al., "In-Situ Thermographic Observation of Mechanical Damage in Bulk-Metallic Glasses during Fatigue and Tensile Experiments, " Intermetallics, 12, 1265-1274 (2004).
54. J. J. Lewandowski and A. L. Greer, "Temperature Rise at Shear Bands in Metallic Glasses, " Nature Mater., 5, 15-18 (2006).
55. N. Yoshida, K. Fujita, Y. Yokoyama, H. Kimura, and A. Inoue, "Effect of Zr Composition and Heat-Treatment on Fracture Toughness in Zr-Cu-Al Bulk Metallic Glass, " J. Jpn. Inst. Metals, 71, 730-735 (2007) (in Japanese).
56. A. Shirota, H. Tokunaga, K. Fujita, Y. Yokoyama, H. Kimura, and A. Inoue, "Strain Rate Dependence of Tensile Behavior in Hypoeutectic Zr-Cu-Al Bulk Metallic Glass, " J. Jpn. Inst. Metals, 72, 722-727 (2008) (in Japanese).
57. A. Inoue, Q. S. Zhang, W. Zhang, K. Yubuta, K. S. Son, and X. M. Wang, "Formation, Thermal Stability and Mechanical Properties of Bulk Glassy Alloys with a Diameter of 20mm in Zr-(Ti, Nb)-Al-Ni-Cu System, " Mater. Trans., 50, 388-394 (2009).
58. 17.5 Glassy Alloy Rod with a Diameter of 16mm Produced by Tilt Casting, " Mater. Trans., 49, 2141-2146 (2008).
59. 20 Alloy Rods with Diameters of 18 and 20mm, " Mater. Trans., 50, 2021-2027 (2009).
60. 8 Alloy with High Glass-Forming Ability, " J. Phys.: Conf. Ser., 144, 012031-1-012031-4 (2009).
61. W. Zhang, Q. S. Zhang, and A. Inoue, "Fabrication of Cu-Zr-Ag-Al Glassy Alloy Samples with a Diameter of 20mm by Water Quenching, " J. Mater. Res., 23, 1452-1456 (2008).
62. Y. Sakamoto, H. Tokunaga, K. Fujita, W. Zhang, H. M. Kimura, and A. Inoue, "Plane-Strain Fracture Toughness in Cu-Zr-Ag-Al Bulk Metallic Glass, " J. Jpn. Inst. Metals, 72, 644-647 (2008) (in Japanese).
63. A. Inoue, "Bulk Amorphous Alloys-Preparation and Fundamental Characteristics, " Trans Tech Publications, 1-148 (1999).
64. y (M=Cr, Mo) Alloys with Large Supercooling and High Strength, " Mater. Trans., JIM, 40, 1130-1136 (1999).
65. T. Zhang and A. Inoue, "New Bulk Glassy Ni-Based Alloys with High Strength of 3000MPa, " Mater. Trans., 43, 708-711 (2002).
66. Y. Q. Zeng, N. Nishiyama, T. Yamamoto, and A. Inoue, "Ni-Rich Bulk Metallic Glasses with High Glass-Forming Ability and Good Metallic Properties, " Mater. Trans., 50, 2441-2445 (2009).
67. H. Li, C. Fan, K. Tao, H. Choo, and P. K. Liaw, "Compressive Behavior of a Zr-Based Metallic Glass at Cryogenic Temperatures, " Adv. Mater., 18, 752-754 (2006).
68. A. Kawashima et al., "Enhanced Tensile Strength and Plasticity of Zr-Cu-Al Bulk Glassy Alloys at Cryogenic Temperatures, " Mater. Trans., 50, 2685-2690 (2009).
69. 3 Bulk Glassy Alloy at Cryogenic Temperatures, " Mater. Sci. Eng., A498, 475-481 (2008).
70. S. L. Zhu, X. M. Wang, F. X. Qin, and A. Inoue, "A New Ti-Based Bulk Glassy Alloy with Potential for Biomedical Application, " Mater. Sci. Eng., A459, 233-237 (2007).
71. F. X. Qin, X. M. Wang, G. Q. Xie, and A. Inoue, "Distinct Plastic Strain of Ni-Free Ti-Zr-Cu-Pd-Nb Bulk Metallic Glasses with Potential for Biomedical Applications, " Intermetallics, 16, 1026-1030 (2008).
72. F. X. Qin et al., "Microstructure and Electrochemical Properties of PVD TiN, (Ti, Al) N-Coated Ti-Based Bulk Metallic Glasses, " Mater. Trans., 50, 1313-1317 (2009).
73. J. Schroers, C. Veazey, and W. L. Johnson, "Amorphous Metallic Foam, " Appl. Phys. Lett., 82, 370-372 (2003).
74. T. Wada and A. Inoue, "Fabrication, Thermal Stability and Mechanical Properties of Porous Bulk Glassy Pd-Cu-Ni-P Alloys, " Mater. Trans., 44, 2228-2231 (2003).
75. 20 Alloys, " J. Mater. Res., 21, 1041-1047 (2006).
76. A. H. Brothers, R. Scheunemann, J. D. DeFouw, and D. C. Dunand, "Processing and Structure of Open-Celled Amorphous Metal Foams, " Scr. Mater., 52, 335-339 (2005).
77. T. Wada, F. Qin, X. Wang, A. Inoue, and M. Yoshimura, "Preparation of Open-Cell Porous Zr-Based Bulk Glassy Alloy, " Mater. Trans., 48, 2381-2384 (2007).
78. J. Schroers, C. Veazey, M. D. Demetriou, and W. L. Johnson, "Synthesis Method for Amorphous Metallic Foam, " J. Appl. Phys., 96, 7723-7730 (2004).
79. T. Wada, X. M. Wang, H. M. Kimura, and A. Inoue, "Supercooled Liquid Foaming of a Zr-Al-Cu-Ag Bulk Metallic Glass Containing Pressurized Helium Pores, " Mater. Lett., 63, 858-860 (2009).
80. A. Inoue, Y. Shinohara, and J. S. Gook, "Thermal and Magnetic Properties of Bulk Fe-Based Glassy Alloys Prepared by Copper Mold Casting, " Mater. Trans., JIM, 36, 1427-1433 (1995).
81. A. Inoue, B. L. Shen, and H. M. Kimura, "Fundamental Properties and Applications of Fe-Based Bulk Glassy Alloys, " J. Metastable Nanocrys. Mater., 20-21, 3-12 (2004).
82. TM" and its Application to Powder Core, " Materia, 47, 39-41 (2008) (in Japanese).
83. 1 Glassy Alloys with High Magnetization and Low Loss Characteristics for Inductor Core Materials, " IEEE Trans. Magn., 46, 373-376 (2010).
84. K. Okumura, J. Kajita, J. Kurosaki, H. M. Kimura, and A. Inoue, "Development of Fe-Based Metallic Glass Shot Amo-Beads for Peening with High Strength and Long Life, "Abstract in 10th International Conference on Shot Peening, Tokyo, Japan, September 15-18, 2008.
85. K. Fujita et al., "Ultrahigh Fatigue Strength in Ti-Based Bulk Metallic Glass, " Rev. Adv. Mater. Sci., 18, 137-139 (2008).
86. A. Inoue, Y. Kawamura, and Y. Saotome, "High Strain Rate Superplasticity of Supercooled Liquid for Amorphous Alloys, " Mater. Sci. Forum, 233-234, 147-154 (1997).
87. T. Zhang, A. P. Tsai, A. Inoue, and T. Masumoto, "Production of Alloy Balloons by Utilizing Viscous Flowability, " Sci. Rep. RITU, A36, 261-271 (1992).
88. Y. Saotome, S. Okaniwa, H. M. Kimura, and A. Inoue, "Superplastic Nanoforging of Pt-Based Metallic Glass with Dies of Zr-BMG and Glassy Carbon Fabricated by Focused Ion Beam, " Mater. Sci. Forum, 539-543, 2088-2093 (2007).
89. NEDO Press Release. "Development of new Fabrication Techniques for Magnetic Storage Media for Hard Disk, " 2009. Available at http://app3.infoc.nedo.go.jp/informations/koubo/press/EF/nedopress.2009-08-05.1932691660/ (accessed August 5, 2009).
90. Y. Saotome "Characteristic Behavior of Metallic Glasses and the Applications, "Abstract in Metallic Glass Inorganic Materials Joining Technology Development Project Meeting, Tokyo Institute of Technology Japan (in Japanese), 2008. Available at http://project2005.msl.titech.ac.jp/symp2008/Abstract/Abstract-Saotome.pdf (accessed March 14, 2008).
91. A. Inoue, B. L. Shen, and N. Nishiyama, "Development and Applications of Late Transition Metal Bulk Metallic Glasses, " Bulk Metallic Glasses, eds., M. Miller, and P. Liaw Springer, New York, NY, USA, 1-25, 2007.
92. G. Kumar, H. X. Tang, and J. Schroers, "Nanomoulding with Amorphous Metals, " Nature, 457, 868-872 (2009).
93. J. Schroers, "The Superplastic Forming of Bulk Metallic Glasses, " JOM, 57, 35-39 (2005).
94. H. M. Chiu, G. Kumar, J. Blawzdziewicz, and J. Schroers, "Thermoplastic Extrusion of Bulk Metallic Glass, " Scr. Mater., 61, 28-31 (2009).
95. A. Inoue and N. Nishiyama, "New Bulk Metallic Glasses for Applications as Magnetic-Sensing, Chemical, and Structural Materials, " MRS Bull., 32, 651-658 (2007).
96. A. Inoue, X. M. Wang, and W. Zhang, "Developments and Applications of Bulk Metallic Glasses, " Rev. Adv. Mater. Sci., 18, 1-9 (2008).
97. N. Nishiyama, K. Amiya, and A. Inoue, "Novel Applications of Bulk Metallic Glass for Industrial Products, " J. Non-Cryst. Solid, 353, 3615-3621 (2007).
98. N. Nishiyama, K. Amiya, and A. Inoue, "Recent Progress of Bulk Metallic Glasses for Strain-Sensing Devices, " Mater. Sci. Eng., A449-451, 79-83 (2007).
99. ™ (with Noise Suppression) HMFTW Series." 2009. Available at http://www.alps.com/products/e/npv_product/090311_HMFTW/HMFTW-E.HTML (accessed June 20, 2010).
100. A. Kobayashi, S. Yano, H. M. Kimura, and A. Inoue, "Mechanical Property of Fe-Base Metallic Glass Coating Formed by Gas Tunnel Type Plasma Spraying, " Surf. Coat. Technol., 202, 2513-2518 (2008).
101. A. Kobayashi, S. Yano, H. M. Kimura, and A. Inoue, "Fe-Based Metallic Glass Coatings Produced by Smart Plasma Spraying Process, " Mater. Sci. Eng., B148, 110-113 (2008).