Online QoS management for multimedia real-time transmission in industrial networks

IEEE Transactions on Industrial Electronics

Volumn 58, Issue 3, 2011, Pages 1061-1071

  Silvestre Blanes, Javier ^a   Almeida, L ^b   Marau, R ^b   Pedreiras, P ^c  

^a INSTITUTO TECNOLÓGICO DE INFORMÁTICA   (Spain)

^b UNIVERSITY OF PORTO   (Portugal)

^c UNIVERSITY OF AVEIRO   (Portugal)

Author keywords

Industrial networks; multimedia; quality of service (QoS) management

Indexed keywords

CONSTANT BITRATE; CONTROL FLOWS; DYNAMIC QUALITY; INDUSTRIAL NETWORKS; LOW-LATENCY; MULTIMEDIA; MULTIMEDIA APPLICATIONS; MULTIMEDIA INFORMATION PROCESSING; MULTIMEDIA TRAFFIC; MULTIMEDIA TRANSMISSIONS; NET WORK UTILIZATION; NETWORK BANDWIDTH; NETWORK PARAMETERS; PRERECORDED VIDEO; QOS MANAGEMENT; QOS METRICS; QUALITY-OF-SERVICE (QOS) MANAGEMENT; RE-COMPUTING; REAL TIME PROTOCOLS; REAL-TIME TRANSMISSIONS; STRUCTURAL CHANGE; TIME CONSTRAINTS; VARIABLE BIT RATE; VIDEO COMPRESSORS;

BANDWIDTH COMPRESSION; DATA PROCESSING; HYDRAULICS; IMAGE QUALITY; INDUSTRIAL APPLICATIONS; INDUSTRY; QUALITY OF SERVICE; REAL VARIABLES; VIDEO ON DEMAND; VIDEO STREAMING; VIDEOTEX;

NETWORK MANAGEMENT;

EID: 79951667367     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2010.2049711     Document Type: Article

References (69)

1. F. G. Molinero, "Real-time requirements of media control applications," in Proc. 19th Euromicro Conf. Real-Time Syst., Pisa, Italy, Jun. 2007.
2. C.-S. Cho, B.-M. Chung, and M.-J. Park, "Development of real-time vision-based fabric inspection system," IEEE Trans. Ind. Electron., vol. 52, no. 4, pp. 1073-1079, Aug. 2005.
3. A. Kumar, "Computer-vision-based fabric defect detection: A survey," IEEE Trans. Ind. Electron., vol. 55, no. 1, pp. 348-363, Jan. 2008.
4. P. Vadakkepat, P. Lim, L. C. De Silva, L. Jing, and L. L. Ling, "Multimodal approach to human-face detection and tracking," IEEE Trans. Ind. Electron., vol. 55, no. 3, pp. 1385-1393, Mar. 2008. (Pubitemid 351447579)
5. C.-L. Hwang and C.-Y. Shih, "A distributed active-vision network-space approach for the navigation of a car-like wheeled robot," IEEE Trans. Ind. Electron., vol. 56, no. 3, pp. 846-855, Mar. 2009.
6. W.-F. Xie, Z. Li, X.-W. Tu, and C. Perron, "Servoing with laser pointer in robotic manufacturing systems," IEEE Trans. Ind. Electron., vol. 56, no. 2, pp. 520-529, Feb. 2009.
7. Y. Motai and A. Kosaka, "Hand-eye calibration applied to viewpoint selection for robotic vision," IEEE Trans. Ind. Electron., vol. 55, no. 10, pp. 3731-3741, Oct. 2008.
8. B. Rinner and W. Wolf, "An introduction to distributed smart cameras," Proc. IEEE, vol. 90, no. 10, pp. 1565-1575, Oct. 2008.
9. L. Almeida, P. Pedreiras, and J. A. Fonseca, "The FTT-CAN protocol: Why and how," IEEE Trans. Ind. Electron., vol. 49, no. 6, pp. 1189-1201, Dec. 2002.
10. P. Pedreiras, P. Gai, L. Almeida, and G. Buttazzo, "FTT-Ethernet: A flexible real-time communication protocol that supports dynamic QoS management on Ethernet-based systems," IEEE Trans. Ind. Informat., vol. 1, no. 3, pp. 162-172, Aug. 2005. (Pubitemid 41486885)
11. J. Decotignie, "The many faces of industrial Ethernet (past and present)," IEEE Ind. Electron. Mag., vol. 3, no. 1, pp. 8-19, Mar. 2009.
12. J. Jasperneite, J. Imtiaz, M. Schumacher, and K. Weber, "A proposal for a generic real-time Ethernet system," IEEE Trans. Ind. Informat., vol. 5, no. 2, pp. 75-85, May 2009.
13. J.-P. Thomesse, "Fieldbus technology in industrial automation," Proc. IEEE, vol. 93, no. 6, pp. 1073-1101, Jun. 2005.
14. J. Silvestre, L. Almeida, R. Marau, and P. Pedreiras, "Dynamic QoS management for multimedia real-time transmission in industrial environments," in Proc. 12th IEEE Int. Conf. Emerging Technol. Factory Autom., Sep. 2007, pp. 1473-1480.
15. Information Technology-Digital Compression and Coding of Continuous-Tone Still Images: Requirements and Guidelines, ISO/IEC 10918-1, Feb. 1994.
16. M. W. Marcellin, M. J. Gormish, A. Bilgin, and M. P. Boliek, "An overview of JPEG-2000," in Proc. DCC, Mar. 2000, pp. 523-541.
17. Generic Coding of Moving Pictures and Associated Audio Information- Part 2, Video, ISO/IEC DIS 13818-2, May 1994.
18. Video Coding for Low Bit Rate Communications, ITU-T Recommendation H.263, Apr. 1995.
19. Coding of Audio-Visual Objects-Part 2: Visual, ISO/IEC 14496-2 (MPEG-4 Visual Version 1), Apr. 1999.
20. Coding of Audio-Visual Objects-Part 10: Advanced Video Coding (AVC) ISO/IEC 14496-10, ITU-T Recommendation H.264 AVC for generic audio visual services, 2003.
21. White Paper: Digital Video Compression: Review of the Methodologies and Standards to Use for Video Transmission and Storage, Axis Commun., Lund, Sweden, Jun. 2004.
22. B. Bouras and A. Gkamas, "Multimedia transmission with adaptative QoS based on real-time protocols," Int. J. Commun. Syst., no. 16, pp. 225-248, 2003.
23. B. Vandalore, W. Feng, R. Jain, and S. Fahmy, "A survey of application layer techniques for adaptive streaming of multimedia," Real-Time Imaging, vol. 7, no. 3, pp. 221-235, Jun. 2001. (Pubitemid 32576303)
24. V. Veeraraghavan and S. Weber, "Fundamental tradeoffs in distributed algorithms for rate adaptive multimedia streams," Comput. Netw., vol. 52, no. 6, pp. 1238-1251, Apr. 2008.
25. H. Schulzrinne, S. Casner, R. Frederick, and V. Jacobson, "RTP: A Transport Protocol for Real-Time Applications," RFC 1889, Audio-Video Transport Working Group, Sep. 1987.
26. H. Schulzrinne, A. Rao, and R. Lanphier, "Real Time Streaming Protocol (RTSP)," RFC 2326, Audio-Video Transport Working Group, Apr. 1998.
27. M. Handley, H. Schulzrinne, E. Schooler, and J. Rosenberg, "SIP: Session Initiation Protocol," RFC 2543, Networking Working Group, Mar. 1999.
28. S. Sen, J. L. Rexford, J. K. Dey, J. F. Kurose, and D. F. Towsley, "Online smoothing of variable-bit-rate streaming video," IEEE Trans. Multimedia, vol. 2, no. 1, pp. 37-48, Mar. 2000.
29. T. Liu and C. Choudary, "Content-adaptive wireless streaming of instructional videos," ACM Multimedia Tools Appl., vol. 28, no. 1, pp. 157-171, Jan. 2006.
30. A. Mittal, A. Pande, and P. Kumar, "Content-based network resource allocation for real time remote laboratory applications," in Signal, Image and Video Processing. New York: Springer-Verlag, 2009.
31. J. Ribas-Corbera and S. Lei, "Rate control in DCT video coding for lowdelay communications," IEEE Trans. Circuits Syst. Video Technol., vol. 9, no. 1, pp. 172-185, Feb. 1999.
32. J.-C. Tsai, "Rate control for low-delay video coding using a dynamic rate table," IEEE Trans. Circuits Syst. Video Technol., vol. 15, no. 1, pp. 133- 137, Jan. 2005.
33. R. Razavi, M. Fleury, and M. Ghanbari, "Low-delay video control in a personal area network for augmented reality," IET Image Process., vol. 2, no. 3, pp. 150-162, Jun. 2008.
34. Video Codec Test Model, TMN8, ITU-T/SG15, 1997.
35. Z. Zhang, S. Nelakuditi, R. Aggarwal, and R. P. Tsang, "Efficient selective frame discard algorithms for stored video delivery across resource constrained networks," Real-Time Imaging, vol. 7, no. 3, pp. 255-273, Jun. 2001. (Pubitemid 32576305)
36. M. G. Valls, A. Alonso, and J. A. de la Puente, "Dynamic adaptation mechanism in multimedia embedded systems," in Proc. IEEE Int. Conf. INDIN, Jun. 2009, pp. 188-193.
37. R. Marau, P. Leite, M. Velasco, P. Marti, L. Almeida, P. Pedreiras, and J. M. Fuertes, "Performing flexible control on low cost microcontrollers using a minimal real-time kernel," IEEE Trans. Ind. Informat., vol. 4, no. 2, pp. 125-133, May 2008. (Pubitemid 351720903)
38. R. Marau, L. Almeida, and P. Pedreiras, "Enhancing real-time communication over COTS Ethernet switches," in Proc. IEEE Int. Workshop Factory Commun. Syst., Sep. 2006, pp. 295-302. (Pubitemid 351470991)
39. W. Ding and B. Liu, "Rate control of MPEG video coding and recording by rate-quantization model," IEEE Trans. Circuits Syst. Video Technol., vol. 6, no. 2, pp. 12-20, Feb. 1996. (Pubitemid 126777392)
40. J. Silvestre, V. Sempere, and T. Albero, "Industrial video sequences for network performance evaluation," in Proc. 5th IEEE Workshop Factory Commun. Syst., Sep. 2004, pp. 343-347. (Pubitemid 40575242)
41. Z.Wang and A. C. Bovik, "Mean squared error: Love it or leave it?" IEEE Signal Process. Mag., vol. 26, no. 1, pp. 98-117, Jan. 2009.
42. Z. Wang, L. Lu, and A. C. Bovik, "Video quality assessment based structural distortion measurement," Signal Process.: Image Commun., vol. 19, no. 2, pp. 121-132, Feb. 2004.
43. R. Marau, L. Almeida, P. Pedreiras, M. Gonzalez Harbour, and D. Sangorrin, "Integration of a flexible network in a resource contracting framework," in Proc. 12th IEEE Conf. Emerging Technol. Factory Autom., Sep. 2007, pp. 1481-1488.
44. Y. H. Liu, "Design and implementation of an FPGA-based CCFL driving system with digital dimming capability," IEEE Trans. Ind. Electron., vol. 54, no. 6, pp. 3307-3316, Dec. 2007.
45. E. Akpinar and I. Yilmazlar, "Transformerless single-phase inverter design for LCD television," IEEE Trans. Consum. Electron., vol. 53, no. 2, pp. 697-703, May 2007. (Pubitemid 47215089)
46. S. K. Kim, H. S. Han, Y. J. Woo, and G. H. Cho, "A low-cost highefficiency CCFL inverter with new capacitive sensing and control," IEEE Trans. Power Electron., vol. 21, no. 5, pp. 1444-1451, Sep. 2006.
47. G. H. Kweon, Y. C. Lim, and S. H. Yang, "An analysis of the backlight inverter by topology," in Proc. IEEE ISIE Conf., 2001, pp. 896-900.
48. R. L. Steigerwald, "A comparison of half-bridge resonant converters," IEEE Trans. Power Electron., vol. 3, no. 2, pp. 174-182, Apr. 1988.
49. M. S. Perdigao, J. M. Alonso, M. A. Dalla Costa, and E. S. Saraiva, "Comparative analysis and experiments of resonant tanks for magnetically controlled Electronic ballasts," IEEE Trans. Ind. Electron., vol. 55, no. 9, pp. 3201-3211, Sep. 2008.
50. J. A. Donahue and M. M. Jovanovic, "The LCC inverter as a cold cathode fluorescent lamp driver," in Proc. IEEE Appl. Power Electron. Conf., 1994, pp. 427-433.
51. S. W. Lee, D. Y. Ko, D. Y. Huh, and Y. I. Yoo, "Simplified control technique for LCD backlight inverter systems using the mixed dimming method," in Proc. IEEE Appl. Power Electron. Conf., 2001, pp. 447-453. (Pubitemid 32327423)
52. W. Chen, "Series-parallel resonant forward inverter as a cold cathode fluorescent lamp driver," in Proc. IEEE Appl. Power Electron. Conf., 2002, pp. 943-947. (Pubitemid 34661133)
53. C. S. Postinglione, A. J. Perin, and C. B. Nascimento, "Single-stage power factor correction AC-DC converter based on continuous input current charge-pump topologies," in Proc. IEEE Power Electron. Spec. Conf., 2008, pp. 2478-2484.
54. H. L. Do and B. H. Kwon, "Single-stage line-coupled half-bridge ballast with unity power factor and ripple-free input current using a coupled inductor," IEEE Trans. Ind. Electron., vol. 50, no. 6, pp. 1259-1266, Dec. 2003.
55. E. Deng and S. Cuk, "Single stage, high power factor, lamp ballast," in Proc. IEEE Appl. Power Electron. Conf., 1994, pp. 441-449.
56. K. H. Liu and Y. L. Lin, "Current waveform distortion in power factor correction circuits employing discontinuous-mode boost converters," in Proc. IEEE Power Electron. Spec. Conf., 1989, pp. 825-829.
57. F. J. Diaz, F. J. Azcondo, R. Casanueva, C. Branas, and R. Zane, "Digital control of a low frequency square-wave Electronic ballast with resonant ignition," IEEE Trans. Ind. Electron., vol. 55, no. 9, pp. 3180-3191, Sep. 2008.
58. M. K. Kazimierczuk and W. Szaraniec, "Electronic ballast for fluorescent lamps," IEEE Trans. Power Electron., vol. 8, no. 4, pp. 386-395, Oct. 1993.
59. J. M. Kwon, W. Y. Choi, H. L. Do, and B. H. Kwon, "Singlestage half-bridge converter using a coupled-inductor," Proc. Inst. Elect. Eng.-Electr. Power Appl., vol. 152, no. 3, pp. 748-756, May 2005.
60. R. O. Brioschi and J. L. F. Vieira, "High-power-factor Electronic ballast with constant dc link voltage," IEEE Trans. Power Electron., vol. 13, no. 6, pp. 1030-1037, Nov. 1998. (Pubitemid 128742354)
61. M. A. Có, D. S. L. Simonetti, and J. L. F. Vieira, "High-power-factor Electronic ballast based on a single power processing stage," IEEE Trans. Ind. Electron., vol. 47, no. 4, pp. 809-820, Aug. 2000.
62. K. Jirasereeamornkul, M. K. Kazimierczuk, and K. Chamnongthai, "Single-stage Electronic ballast with class-E rectifier as power-factor corrector," IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 53, no. 1, pp. 139- 148, Jan. 2006. (Pubitemid 43141937)
63. C. H. Lin, "Digital-dimming controller with current spikes elimination technique for LCD backlight Electronic ballast," IEEE Trans. Ind. Electron., vol. 53, no. 6, pp. 1881-1888, Dec. 2006.
64. T. B. Marchesan, M. A. Dalla-Costa, J. M. Alonso, and R. N. do Prado, "Integrated Zeta-Flyback Electronic ballast to supply high-intensity discharge lamps," IEEE Trans. Ind. Electron., vol. 54, no. 5, pp. 2918-2921, Oct. 2007.
65. H. Chiu and S. J. Cheng, "Single-stage voltage source charge-pump Electronic ballast with switched-capacitor dimmer for multiple fluorescent lamps," IEEE Trans. Ind. Electron., vol. 54, no. 5, pp. 2915-2918, Oct. 2007.
66. H. J. Chiu, T. H. Song, S. J. Cheng, C. H. Li, and Y. K. Lo, "Design and implementation of a single-stage high-frequency HID lamp Electronic ballast," IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 674-683, Feb. 2008. (Pubitemid 351350379)
67. G. Y. Jeong, "Novel LCD backlight inverter using a simple control circuit," in Proc. IEEE Power Electron. Spec. Conf., 2007, pp. 2964-2968.
68. C. S. Moo, K. H. Lee, H. L. Cheng, andW.M. Chen, "A single-stage highpower- factor Electronic ballast with ZVS buck-boost conversion," IEEE Trans. Ind. Electron., vol. 56, no. 4, pp. 1136-1146, Apr. 2009.
69. Y. C. Chuang, C. S. Moo, H.W. Chen, and T. F. Lin, "A novel single-stage high-power-factor Electronic ballast with boost topology for multiple fluorescent lamps," IEEE Trans. Ind. Electron., vol. 45, no. 1, pp. 323-332, Jan./Feb. 2009.