The many faces of industrial Ethernet [Past and present]

IEEE Industrial Electronics Magazine

Volumn 3, Issue 1, 2009, Pages 8-19

  Decotignie, Jean Dominique ^a  

^a CSEM   (Switzerland)

Author keywords

Delay; Ethernet networks; IEEE 802.3 Standards; Proposals; Protocols; Real time systems; Switches

Indexed keywords

DELAY; ETHERNET NETWORKS; IEEE 802.3 STANDARDS; PROPOSALS; PROTOCOLS;

ETHERNET; FLOORS; FREQUENCY STANDARDS; INDUSTRIAL APPLICATIONS; INTERACTIVE COMPUTER SYSTEMS; LOCAL AREA NETWORKS; TIME SWITCHES;

REAL TIME SYSTEMS;

EID: 65149087897     PISSN: 19324529     EISSN: None     Source Type: Journal    
DOI: 10.1109/MIE.2009.932171     Document Type: Article

References (43)

1. M. Felser, "Real-time Ethernet - Industry prospective," Proc. IEEE vol. 93, no. 6, pp. 1118-1129, June 2005.
2. J. Kurose, M. Schwartz, and M. Yemini, "Multiple-access protocols and time-constrained communication," ACM Comput. Surv., vol. 16, no. 1, pp. 43-70, Mar. 1984.
3. J. Boudenant, B. Feydel, A. Peyrache, and P. Rolin, "Lynx: An advanced deterministic CSMA-CD local area network prototype," in Proc. Advanced Seminar on Real-Time Local Area Networks, Bandol, France, Apr. 16-18, 1986, pp. 177-192.
4. Digital Data Communications for Measurement and Control - Fieldbus Standard for Use in Industrial Control Systems. Parts 1 to 6, IEC Standard 61158, 2003.
5. High Efficiency Communication Subsystem for Small Data Packages, CENELEC Standard EN 50254, 1998.
6. Low-Voltage Switchgear and Controlgear - Controller-Device Interfaces (CDIs) - Part 2: Actuator Sensor Interface (AS-i), IEC Standard 62026-2, 2000.
7. Electrical Equipment of Industrial Machines - Serial Data Link for Real-Time Communication Between Controls and Drives, IEC Standard 61491, 2002.
8. Control Network Specification, Electronic Industries Alliance Standard EIA-709.1, Mar. 1998.
9. H. Kirrmann and P. Zuber, "The IEC/EEE train communication network," IEEE Micro., vol. 21, no. 2, pp. 81-92, Mar./Apr. 2001 (see also IEEE Std. 1473-1999).
10. M. Haverty, "MIL-STD 1553 - A standard for data communications," Commun. Broadcast., vol. 10, no. 1, pp. 29-33, Jan. 1986.
11. Low-Voltage Switchgear and Controlgear - Controller-Device Interfaces (CDIs) - Part 3: DeviceNet, IEC Standard 62026-3, 2000.
12. Low-Voltage Switchgear and Controlgear - Controller-Device Interfaces (CDIs) - Part 5: Smart Distributed System (SDS), IEC Standard 62026-5, 2000.
13. Road Vehicles - Exchange of Digital Information - Controller Area Network (CAN) for High-Speed Communication, ISO Standard 11898, 1993.
14. Information Processing Systems - Open Systems Interconnection - Basic Reference Model: The Basic model, ISO/IEC Standard 7498-1, 1994.
15. J.-P. Thomesse, "Time and industrial local area networks," in Proc. 7th Annu. European Computer Conf. on Computer Design, Manufacturing and Production (COMPEURO'93), Paris-Evry, France, May 24-27, 1993, pp. 365-374.
16. R. Sanders and A. Weaver, "The Xpress transfer protocol (XTP) - A tutorial," Comput. Commun. Rev., vol. 20, no. 5, pp. 65-80, Oct. 1990.
17. T. La Porta and M. Schwartz, "The multistream protocol: A highly fl exible high speed transport protocol," IEEE J. Select. Areas Commun. vol. 11, no. 4, pp. 519-530, May 1993.
18. S. Iren, P. D. Amer, and P. T. Conrad, "The transport layer: Tutorial and survey," ACM Comput. Surv., vol. 31, no. 4, pp. 360-404, Dec. 1999.
19. L. Svobodova, "Implementing OSI systems," IEEE J. Select. Areas Commun., vol. 7, no. 7, pp. 1115-1130, Sept. 1989.
20. ISO/IEC (1997). Information processing systems - Telecommunications and information exchange between systems-Local and metropolitan area networks - Technical reports and guidelines, Part 5: Media access control bridging of Ethernet V2.0 in local area networks. ISO/IEC Technical Report 11802-5: 1997(E).
21. IEEE Standards for Local Area Networks: Part 3: Carrier Sense Multiple Access with Collision Detect on (CSMA/CD) Access Method and Physical Layer Specifications, IEEE Std 802.3, 2002 ed. (revision to IEEE Std 802.3, 2000 ed).
22. D. Boggs, J. Mogul, and C. Kent, "Measured capacity of an Ethernet: Myths and reality," in Proc. SIGCOMM'88, 1988, pp. 222-234.
23. K. Ramakrishnan and H. Yang, "The Ethernet capture effect: Analysis and solution," in Proc. 19th Conf. on Local Computer Networks, Minneapolis, MN, Oct. 2-5, 1994, pp. 228-240.
24. IEEE Standards for Local and Metropolitan Area Networks: Media Access Control (MAC) Bridges, IEEE Standard 802.1D, 1990.
25. J.-D. Decotignie, "Ethernet-based real-time and industrial communications," Proc. IEEE, vol. 93, no. 6, pp. 1102-1117, June 2005.
26. M. Molle and L. Kleinrock, "Virtual time CSMA: Why two clocks are better than one," IEEE Trans. Commun., vol. 33, no. 9, pp. 919-933, Sept. 1985.
27. G. Le Lann, A deterministic Multiple CSMA-CD Protocol, Internal Report of INRIA Project, PRO-1-002, Jan. 1983.
28. M. Schwarz, "Implementation of a TTP/C cluster based on commercial gigabit Ethernet components," Diplomarbeit, Technischen Universität Wien, Dec. 2002.
29. L. Kleinrock and M. Scholl, "Packet switching in radio channels: New confl ict free multiple access schemes," IEEE Trans. Commun., vol. 28, no. 7, pp. 1015-1029, July 1980.
30. Z. Wang, G. Xiong, J. Luo, M. Lai, and W. Zhou, "A hard real-time communication control protocol based on the Ethernet," in Proc. 7th Australasian Conf. on Parallel and Real-Time Systems, Sydney, Australia, Nov. 29-30, 2000.
31. T. Chen, J. Huang, and Y. Chen, "Design and implementation of a client-server based real-time protocol on high speed Ethernet networks," in Proc. Int. Conf. on Consumer Electronics, Los Angeles, CA, June 2-4, 1998, pp. 28-29.
32. D. W. Pritty, J. R. Malone, D. N. Smeed, S. K. Banerjee, and N. L. Lawrie, "A real-time upgrade for Ethernet based factory networking," in Proc. Int. Conf. on Industrial Electronics, IECON, vol. 2. Orlando, FL, Nov. 6-10, 1995, pp. 1631-1637.
33. P. Pedreiras, P. Gai, L. Almeida, and G. C. Buttazzo, "FTT-Ethernet: A flexible real-time communication protocol that supports dynamic QoS management on Ethernet-based systems," IEEE Trans. Ind. Inform., vol. 1, no. 3, pp. 162-172.
34. S. Kweon and K. Shin, "Statistical real-time communication over Ethernet," IEEE Trans. Parallel Distrib. Syst., vol. 14, no. 3, pp. 322-335, Mar. 2003.
35. L. Lo Bello, G. A. Kaczynski, O. Mirabella, "Improving the real-time behavior of Ethernet networks using traffi c smoothing," IEEE Trans. Ind. Inform., vol. 1, no. 3, pp. 151-161, Aug. 2005.
36. J. Loeser and H. Härtig, "Low latency hard real-time communication over switched Ethernet," in Proc. 16th Euromicro. Conf. on Real-Time Systems, Catania, Italy, June 30-July 2, 2004, pp. 13-22.
37. S. Varadarajan and T. Chueh, "EtheReal: A host-transparent real-time fast Ethernet switch," in Proc. 6th Int. Conf. on Network Protocols Austin, TX, Oct. 13-16, 1998, pp. 12-21.
38. IEEE Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems, IEEE Standard 1588, 2002.
39. B. Upender and P. Koopman, "Communication protocols for embedded systems," Embedded Syst. Program., vol. 7, no. 1, pp. 46-58, Nov. 1994.
40. J.-P. Thomesse, "Fieldbus technology in industrial automation," Proc. IEEE, vol. 93, no. 6, pp. 1073-1101, June 2005.
41. IEEE Standards for Local and Metropolitan Area Networks: Virtual Bridged Local Area Networks, IEEE Std. 802.1Q-1998.
42. M. Wilkes and D. Wheeler, "The Cambridge digital communications ring," in Proc. Local-Area Commun. Netw. Symp., Boston, USA, May 1979.
43. M. Schumacher, J. Jasperneite, and K. Weber, "A new approach for increasing the performance of the industrial Ethernet system PROFINET," in Proc. 7th IEEE Int. Workshop on Factory Communication Systems (WFCS 2008), Dresden, Germany, May 2008, pp. 159-167.