Minuscule device for hydrogen generation/electrical energy collection system on aluminum alloy surface

International Journal of Hydrogen Energy

Volumn 36, Issue 4, 2011, Pages 2855-2859

  Davoodi, Ali ^a   Pan, Jinshan ^b   Leygraf, Christofer ^b   Parvizi, Reza ^c  

^a HAKIM SABZEVARI UNIVERSITY   (Iran)

^b ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

^c FERDOWSI UNIVERSITY OF MASHHAD   (Iran)

Author keywords

Aluminum alloy; Energy collection; Hydrogen generation; Nanoelectrochemistry; SECM

Indexed keywords

ALUMINUM MICROSTRUCTURE; ALUMINUM SURFACE; CLOSE PROXIMITY; CURRENT EFFICIENCY; CURRENT LEVELS; ELECTRICAL ENERGY; ELECTROCHEMICAL CURRENTS; ENERGY COLLECTION; HYDROGEN ECONOMY; HYDROGEN GENERATION; MICRO-SCALES; MINIATURIZED SYSTEMS; NANO-SIZE; NANOELECTROCHEMISTRY; SCANNING ELECTROCHEMICAL MICROSCOPY; SECM;

ALUMINUM; ALUMINUM ALLOYS; ALUMINUM METALLURGY; ANALYTIC EQUIPMENT; ATOMIC FORCE MICROSCOPY; CERIUM ALLOYS; ELECTROCHEMISTRY; MICROELECTRODES; SCANNING ELECTRON MICROSCOPY;

HYDROGEN PRODUCTION;

EID: 79951579196     PISSN: 03603199     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijhydene.2010.11.048     Document Type: Article

References (29)

1. A.S. Arico, P. Bruce, B. Scrosati, J.M. Tarascon, and W.V. Schalkwijk Nanostructured materials for advanced energy conversion and storage devices Nat Mater 4 2005 366 377 (Pubitemid 40557887)
2. L. Schlapbach, and A. Zuttel Hydrogen-storage materials for mobile applications Nature 414 2001 353 358 (Pubitemid 33097818)
3. H.Z. Wang, D.Y.C. Leung, M.K.H. Leung, and M. Ni A review on hydrogen production using aluminum and aluminum alloys Renew Sustain Energ Rev 13 2009 845 853
4. M. Sterlin Leo Hudson, P.K. Dubey, D. Pukazhselvan, S.K. Pandey, R.K. Singh, and H. Raghubanshi Hydrogen energy in changing environmental scenario: Indian context Int J Hydrogen Energ 34 2009 7358 7367
5. M. Balat Potential importance of hydrogen as a future solution to environmental and transportation problems Int J Hydrogen Energ 33 2008 4013 4029
6. A.Z. Zhuk, A.E. Sheindlin, B.V. Kleymenov, E.I. Shkolnikov, and M.Y. Lopatin Use of low-cost aluminum in electric energy production J Power Sourc 157 2006 921 926 (Pubitemid 43816197)
7. S.S. Martinez, W.L. Benites, A.A.A. Gallegos, and P.J. Sebastian Recycling of aluminum to produce green energy Sol Energ Mater Sol Cell 88 2005 237 243 (Pubitemid 40774005)
8. S.S. Martinez, L.A. Sanchez, A.A.A. Gallegosa, and P.J. Sebastian Coupling a PEM fuel cell and the hydrogen generation from aluminum waste cans Int J Hydrogen Energ 32 2007 3159 3162 (Pubitemid 47570009)
9. S.M. Kotay, and D. Das Biohydrogen as a renewable energy resource-prospects and potentials Int J Hydrogen Energ 33 2008 258 263
10. T. Hiraki, S. Yamauchi, M. Iida, H. Uesugi, and T. Akiyama Process for recycling waste aluminum with generation of high-pressure hydrogen Environ Sci Technol 41 2007 4454 4457 (Pubitemid 46981742)
11. C.R. Jung, A. Kundu, B. Ku, J.H. Gil, H.R. Lee, and J.H. Jang Hydrogen from aluminum in a flow reactor for fuel cell applications J Power Sourc 175 2008 490 494 (Pubitemid 350161823)
12. L. Soler, J. Macanas, M. Munoz, and J. Casado Synergistic hydrogen generation from aluminum and aluminum alloys and sodium borohydride in aqueous solutions Int J Hydrogen Energ 32 2007 4702 4710 (Pubitemid 350180226)
13. B. Sakintuna, F. Lamari-Darkrim, and M. Hirscher Metal hydride materials for solid hydrogen storage: a review Int J Hydrogen Energ 32 2007 1121 1140 (Pubitemid 46777202)
14. S. Yang, and H. Knickle Design and analysis of aluminum/air battery system for electric vehicles J Power Sourc 112 2002 162 173
15. S. Yang, W. Yang, G. Sun, and H. Knickle Secondary current density distribution analysis of an aluminum-air cell J Power Sourc 161 2006 1412 1419 (Pubitemid 44738746)
16. W. Wang, D.M. Chen, and K. Yang Investigation on microstructure and hydrogen generation performance of Al-rich alloys Int J Hydrogen Energ 35 2010 12011 12019
17. A.J. Bard, and M.V. Mirkin Scanning electrochemical microscopy 2001 Marcel Dekker Inc. New York
18. A. Davoodi, A. Farzadi, J. Pan, C. Leygraf, and Y. Zhu Developing an AFM-based SECM system; instrumental setup, SECM simulation, characterization, and calibration J Electrochem Soc 155 2008 C474 C485
19. A. Davoodi, J. Pan, C. Leygraf, and S. Norgren In-Situ investigation of localized corrosion of aluminum alloys in chloride solution using integrated EC-AFM/SECM techniques Electrochem Solid State Lett 8 2005 B21 B24
20. G. Wittstock, M. Burchardt, S. Pust, E.Y. Shen, and C. Zhao Scanning electrochemical microscopy for direct imaging of reaction rates Angew Chem Int 46 2007 1584 1617 (Pubitemid 46981339)
21. G.L. Song, and A. Atrens Understanding magnesium corrosion - a framework for improved alloy performance Adv Eng Mater 5 2003 837 858
22. D.M. Drazic, and J.P. Popic Corrosion rates and negative difference effects for Al and some Al alloys J Appl Electrochem 29 1999 43 50
23. J. Turner Oxygen catalysis: the other half of the equation Nat Mater 7 2008 770 771
24. M. Büchler, T. Watari, and W.H. Smyrl Investigation of the initiation of localized corrosion on aluminum alloys by using fluorescence microscopy Corrosion Sci 42 2000 1661 1668 (Pubitemid 30480627)
25. O. Schneider, G.O. Ilevbare, J.R. Scully, and R.G. Kelly Situ confocal laser scanning microscopy of AA 2024-T3 corrosion metrology II. Trench formation around particles J Electrochem Soc 151 2004 B465 B472
26. R.C. Newman Local chemistry considerations in the tunneling corrosion of aluminum Corrosion Sci 37 1995 527 533
27. M.Q. Fan, F. Xu, L.X. Sun, J.N. Zhao, T. Jiang, and W.X. Li Hydrolysis of ball milling Al-Bi-hydride and Al-Bi-salt mixture for hydrogen generation J Alloy Comp 460 2008 125 129 (Pubitemid 351759050)
28. M.Q. Fan, F. Xu, and L.X. Sun Studies on hydrogen generation characteristics of hydrolysis of the ball milling Al-based materials in pure water Int J Hydrogen Energ 32 2007 2809 2815 (Pubitemid 47374938)
29. J. Wiedemair, B. Mizaikoff, and C. Kranz Combined scanning probe techniques for in-situ electrochemical imaging at a nanoscale B. Bhushan, H. Fuchs, S. Kawata, Applied scanning probe methods 2007 Springer-Verlag Heidelberg New York 225 261