Direct Extraction of Cohesive Fracture Properties from Digital Image Correlation: A Hybrid Inverse Technique

Experimental Mechanics

Volumn 51, Issue 2, 2011, Pages 143-163

  Shen, B ^a   Paulino, G H ^a  

^a University of Illinois at Urbana Champaign   (United States)

Author keywords

Adhesive; Cohesive zone model (CZM); Digital image correlation (DIC); Finite element method (FEM); Full field DIC; Hybrid method; Single edge notched beam (SENB)

Indexed keywords

ADHESIVES; BENDING TESTS; BRITTLENESS; CRACKS; DISPLACEMENT MEASUREMENT; FRACTURE TESTING; IMAGE ANALYSIS; INVERSE PROBLEMS; STRAIN MEASUREMENT; STRESS INTENSITY FACTORS; COMPUTER SIMULATION; FINITE ELEMENT METHOD; FRACTURE; NANOINDENTATION; STRESS CONCENTRATION;

COHESIVE ZONE MODEL; D. DIGITAL IMAGE CORRELATION (DIC); FULL-FIELD DIC; HYBRID METHOD; SINGLE EDGE NOTCHED BEAMS; DIGITAL IMAGE CORRELATIONS; FINITE ELEMENT METHODS (FEM); SINGLE EDGE-NOTCHED BEAM (SENB); FINITE ELEMENT METHOD FEM; FULL-FIELD;

FINITE ELEMENT METHOD; DISPLACEMENT MEASUREMENT;

EID: 79251591684     PISSN: 00144851     EISSN: 17412765     Source Type: Journal    
DOI: 10.1007/s11340-010-9342-6     Document Type: Article

References (63)

1. Barenblatt GI (1959) The formation of equilibrium cracks during brittle fracture. General ideas and hypotheses. Axially-symmetric cracks. J Appl Math Mech 23: 622-636.
2. Dugdale DS (1960) Yielding of steel sheets containing slits. J Mech Phys Solids 8: 100-104.
3. Hillerborg A, Modéer M, Petersson PE (1976) Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements. Cem Concr Res 6: 773-781.
4. Roesler J, Paulino GH, Park K, Gaedicke C (2007) Concrete fracture prediction using bilinear softening. Cem Concr Compos 29: 300-12.
5. Shim D-J, Paulino GH, Dodds RH Jr (2006) J resistance behavior in functionally graded materials using cohesive zone and modified boundary layer models. Int J Fract 139: 91-117.
6. Song SH, Paulino GH, Buttlar WG (2006) Simulation of crack propagation in asphalt concrete using an intrinsic cohesive zone model. ASCE J Eng Mech 132: 1215-1223.
7. Lin G, Meng XG, Cornec A, Schwalbe KH (1999) Effect of strength mis-match on mechanical performance of weld joints. Int J Fract 96: 37-54.
8. Gdoutos EE (2005) Fracture mechanics: an introduction. Springer, Dordrecht.
9. Xu XP, Needleman A (1994) Numerical simulations of fast crack growth in brittle solids. J Mech Phys Solids 42: 1397.
10. Zhang Z, Paulino GH (2005) Cohesive zone modeling of dynamic failure in homogeneous and functionally graded materials. Int J Plast 21: 1195-254.
11. Camacho GT, Ortiz M (1996) Computational modeling of impact damage in brittle materials. Int J Solids Struct 33: 2899-938.
12. Ortiz M, Pandolfi A (1999) Finite-deformation irreversible cohesive elements for three-dimensional crack-propagation analysis. Int J Numer Methods Eng 44: 1267-1282.
13. Zhang Z, Paulino GH (2007) Wave propagation and dynamic analysis of smoothly graded heterogeneous continua using graded finite elements. Int J Solids Struct 44: 3601-3626.
14. Moes N, Belytschko T (2002) Extended finite element method for cohesive crack growth. Eng Fract Mech 69: 813-33.
15. Wells GN, Sluys LJ (2001) A new method for modeling cohesive cracks using finite elements. Int J Numer Methods Eng 50: 2667-2682.
16. Shah SP, Ouyang C, Swartz SE (1995) Fracture mechanics of concrete: applications of fracture mechanics to concrete, rock and other quasi-brittle materials. Wiley, New York.
17. Volokh KY (2004) Comparison between cohesive zone models. Commun Numer Methods Eng 20: 845-856.
18. Song SH, Paulino GH, Buttlar WG (2008) Influence of the cohesive zone model shape parameter on asphalt concrete fracture behavior. In: Paulino GH, Pindera M-J, Dodds RH Jr et al (eds) Multiscale and functionally graded materials. AIP, Oahu Island, pp 730-735.
19. van Mier JGM, van Vliet MRA (2002) Uniaxial tension test for the determination of fracture parameters of concrete: state of the art. Fracture of Concrete and Rock 69: 235-247.
20. Yang J, Fischer G (2006) Simulation of the tensile stress-strain behavior of strain hardening cementitious composites. In: Konsta-Gdoutos MS (ed) Measuring, monitoring and modeling concrete properties. Springer, Dordrecht, pp 25-31.
21. Seung Hee K, Zhifang Z, Shah SP (2008) Effect of specimen size on fracture energy and softening curve of concrete: Part II. Inverse analysis and softening curve. Cem Concr Res 38: 1061-9.
22. van Mier JGM (1997) Fracture processes of concrete: assessment of material parameters for fracture models. CRC, Boca Raton.
23. Elices M (2002) The cohesive zone model: advantages, limitations and challenges. Eng Fract Mech 69: 137-163.
24. Seong Hyeok S, Paulino GH, Buttlar WG (2006) A bilinear cohesive zone model tailored for fracture of asphalt concrete considering viscoelastic bulk material. Eng Fract Mech 73: 2829-48.
25. Song SH, Paulino GH, Buttlar WG (2005) Cohesive zone simulation of mode I and mixed-mode crack propagation in asphalt concrete. Geo-Frontiers 2005 ASCE, Reston, VA, Austin, TX, U. S. A, pp 189-198.
26. Alfano M, Furgiuele F, Leonardi A, Maletta C, Paulino GH (2007) Cohesive zone modeling of mode I fracture in adhesive bonded joints. Key Eng Mater 348-349: 13-16.
27. Tan H, Liu C, Huang Y, Geubelle PH (2005) The cohesive law for the particle/matrix interfaces in high explosives. J Mech Phys Solids 53: 1892-917.
28. Abanto-Bueno J, Lambros J (2005) Experimental determination of cohesive failure properties of a photodegradable copolymer. Exp Mech 45: 144-52.
29. Zabaras N, Morellas V, Schnur D (1989) Spatially regularized solution of inverse elasticity problems using the BEM. Commun Appl Numer Methods 5: 547-553.
30. Schnur DS, Zabaras N (1990) Finite element solution of two-dimensional inverse elastic problems using spatial smoothing. Int J Numer Methods Eng 30: 57-75.
31. Shen B, Stanciulescu I, Paulino GH (2008) Inverse computation of cohesive fracture properties from displacement fields. Submitted for journal publication.
32. Dally JW, Riley WF (2005) Experimental stress analysis. College House Enterprises, Knoxville.
33. Peters WH, Ranson WF (1982) Digital imaging techniques in experimental stress analysis. Opt Eng 21: 427-31.
34. Sutton MA, Wolters WJ, Peters WH, Ranson WF, McNeill SR (1983) Determination of displacements using an improved digital correlation method. Image Vis Comput 1: 133-139.
35. Chu TC, Ranson WF, Sutton MA, Peters WH (1985) Applications of digital-image-correlation techniques to experimental mechanics. Exp Mech 25: 232-44.
36. Bruck HA, McNeill SR, Sutton MA, Peters WH III (1989) Digital image correlation using Newton-Raphson method of partial differential correction. Exp Mech 29: 261-267.
37. Bonnet M, Constantinescu A (2005) Inverse problems in elasticity. Inverse Probl 21: 1-50.
38. Avril S, Bonnet M, Bretelle A-S, Grediac M, Hild F, Ienny P, Latourte F, Lemosse D, Pagano S, Pagnacco E, Pierron F (2008) Overview of identification methods of mechanical parameters based on full-field measurements. Exp Mech 48: 381-402.
39. Abanto-Bueno J, Lambros J (2002) Investigation of crack growth in functionally graded materials using digital image correlation. Eng Fract Mech 69: 1695-1711.
40. Choi S, Shah SP (1997) Measurement of deformations on concrete subjected to compression using image correlation. Exp Mech 37: 307-313.
41. Sokhwan C, Shah SP (1998) Fracture mechanism in cement-based materials subjected to compression. ASCE J Eng Mech 124: 94-102.
42. Corr D, Accardi M, Graham-Brady L, Shah SP (2007) Digital image correlation analysis of interfacial debonding properties and fracture behavior in concrete. Eng Fract Mech 74: 109-21.
43. Zitova B, Flusser J (2003) Image registration methods: a survey. Image Vis Comput 21: 977-1000.
44. Lu H, Cary PD (2000) Deformation measurements by digital image correlation: implementation of a second-order displacement gradient. Exp Mech 40: 393-400.
45. Tong W (2005) An evaluation of digital image correlation criteria for strain mapping applications. Strain 41: 167-75.
46. Pan B, Qian K, Xie H, Asundi A (2009) Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review. Meas Sci Technol 20: 062001 (17 pp.).
47. Pan B, Xie H, Guo Z, Hua T (2007) Full-field strain measurement using a two-dimensional Savitzky-Golay digital differentiator in digital image correlation. Opt Eng 46: 033601.
48. Lecompte D, Sol H, Vantomme J, Habraken A (2006) Analysis of speckle patterns for deformation measurements by digital image correlation In: Proceedings of SPIE Vol 6341 International Society for Optical Engineering, Bellingham, WA, United States, Nimes, France, pp 63410E1-6.
49. Pan B, Xie H, Wang Z, Qian K, Wang Z (2008) Study on subset size selection in digital image correlation for speckle patterns. Opt Express 16: 7037-7048.
50. Lecompte D, Smits A, Bossuyt S, Sol H, Vantomme J, van Hemelrijck D, Habraken AM (2006) Quality assessment of speckle patterns for digital image correlation. Opt Lasers Eng 44: 1132-1145.
51. Sorzano COS, Thevenaz P, Unser M (2005) Elastic registration of biological images using vector-spline regularization. IEEE Trans Biomed Eng 52: 652-663.
52. Cheng P, Sutton MA, Schreier HW, McNeill SR (2002) Full-field speckle pattern image correlation with B-spline deformation function. Exp Mech 42: 344-352.
53. Shen B (2009) Functionally graded fiber-reinforced cementitious composites-manufacturing and extraction of cohesive fracture properties using finite element and digital image correlation, Ph. D. thesis. University of Illinois at Urbana-Champaign, United States.
54. Genovese K, Lamberti L, Pappalettere C (2005) Improved global-local simulated annealing formulation for solving non-smooth engineering optimization problems. Int J Solids Struct 42: 203-37.
55. Molimard J, Le Riche R, Vautrin A, Lee JR (2005) Identification of the four orthotropic plate stiffnesses using a single open-hole tensile test. Exp Mech 45: 404-11.
56. Grediac M, Pierron F, Avril S, Toussaint E (2006) The virtual fields method for extracting constitutive parameters from full-field measurements: a review. Strain 42: 233-253.
57. Geymonat G, Pagano S (2003) Identification of mechanical properties by displacement field measurement: a variational approach. Meccanica 38: 535-545.
58. Roux S, Hild F (2008) Digital image mechanical identification (DIMI). Exp Mech 48: 495-508.
59. Avril S, Pierron F (2007) General framework for the identification of constitutive parameters from full-field measurements in linear elasticity. Int J Solids Struct 44: 4978-5002.
60. Bezerra LM, Saigal S (1993) A boundary element formulation for the inverse elastostatics problem (IESP) of flaw detection. Int J Numer Methods Eng 36: 2189-202.
61. Schnur DS, Zabaras N (1992) An inverse method for determining elastic material properties and a material interface. Int J Numer Methods Eng 33: 2039-57.
62. Tarantola A (2005) Inverse problem theory and methods for model parameter estimation. Society for Industrial and Applied Mathematics, Philadelphia.
63. Nelder JA, Mead R (1965) Simplex method for function minimization. Comput J 7: 308-313.