Development and characterization of porous epoxy monoliths via pore-initiated polymerization

Colloids and Surfaces A: Physicochemical and Engineering Aspects

Volumn 375, Issue 1-3, 2011, Pages 68-75

  Tu, Jie ^a   Du, Zhongjie ^a   Li, Hangquan ^a   Zhang, Chen ^a  

^a BEIJING UNIVERSITY OF CHEMICAL TECHNOLOGY   (China)

Author keywords

Concentrated emulsion; Epoxy; Hydrophilic; Porous; Surface modification

Indexed keywords

CARBOXYLIC ACIDS; CONTACT ANGLE; CURING; EMULSIFICATION; EMULSION POLYMERIZATION; FREE RADICALS; HYDROPHILICITY; MONOLITHIC INTEGRATED CIRCUITS; ORGANIC ACIDS; POLYETHYLENES; POLYMER BLENDS; POLYMERS; SCANNING ELECTRON MICROSCOPY; TRANSMISSION ELECTRON MICROSCOPY; WATER ABSORPTION;

CONCENTRATED EMULSION; EPOXY; HYDROPHILIC; POROUS; SURFACE MODIFICATION;

ACRYLIC MONOMERS;

ACETONE; ACRYLIC ACID; MONOMER; POROUS EPOXY MONOLITH; POROUS POLYMER; UNCLASSIFIED DRUG; WATER;

ARTICLE; CONTACT ANGLE; EMULSION; ENERGY DISPERSIVE SPECTROMETER; MORPHOLOGY; POLYMERIZATION; PRIORITY JOURNAL; SCANNING ELECTRON MICROSCOPY; SOLUTION AND SOLUBILITY; SPECTROMETER; SURFACE PROPERTY; SYNTHESIS; TRANSMISSION ELECTRON MICROSCOPY; WATER ABSORPTION; WETTABILITY;

EID: 78751618980     PISSN: 09277757     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.colsurfa.2010.11.059     Document Type: Article

References (41)

1. Hutmacher D.W. Scaffolds in tissue engineering bone and cartilage. Biomaterials 2000, 21:2529-2543.
2. Richardson T.P., Peters M.C., Ennett A.B., Mooney D.J. Polymeric system for dual growth factor delivery. Nat. Biotechnol. 2001, 19:1029-1034.
3. Drury J.L., Mooney D.J. Hydrogels for tissue engineering: scaffold design variables and applications. Biomaterials 2003, 24:4337-4351.
4. Akay G., Birch M.A., Bokhari M.A. Microcellular polyHIPE polymer supports osteoblast growth and bone formation in vitro. Biomaterials 2004, 25:3991-4000.
5. Rolison D.R. Catalytic nanoarchitectures-the importance of nothing and the unimportance of periodicity. Science 2003, 299:1698-1701.
6. Zou H., Huang X., Ye M., Luo Q. Monolithic stationary phases for liquid chromatography and capillary electrochromatography. J. Chromatogr. A 2002, 954:5-32.
7. Wu C.G., Lua M.I., Chuang H.J. PVdF-HFP/P123 hybrid with mesopores: a new matrix for high-conducting, low-leakage porous polymer electrolyte. Polymer 2005, 46:5929-5938.
8. Mikos A.G, Thorsen A.J., Czerwonka L.A., Bao Y., Langer R., Winslow D.N., Vacanti J.P. Preparation and characterization of poly(l-lactic acid) foams. Polymer 1994, 35:1068-1077.
9. Mooney D.J., Mazzoni C.L., Breued C., McNamara K., Hem D., Vacanti J.P., Langer R. Stabilized polyglycolic acid fibre-based tubes for tissue engineering. Biomaterials 1996, 17:115-124.
10. Schugens C., Maquet V., Grandfils C., Jerome R., Teyssie P. Biodegradable and macroporous polylactide implants for cell transplantation: 1. Preparation of macroporous polylactide supports by solid-liquid phase separation. Polymer 1996, 37:1027-1038.
11. Loera A.G., Cara F., Dumon M., Pascault J.P. Porous epoxy thermosets obtained by a polymerization-induced phase separation process of a degradable thermoplastic polymer. Macromolecules 2002, 35:6291-6297.
12. Sheridan M.H., Shea L.D., Peters M.C., Mooney D.J. Bioabsorbable polymer scaffolds for tissue engineering capable of sustained growth factor delivery. J. Control. Release 2000, 64:91-102.
13. Busby W., Cameron N.R., Jahoda C.A.B. Emulsion-derived foams (PolyHIPEs) containing poly(e{open}-caprolactone) as matrixes for tissue engineering. Biomacromolecules 2001, 2:154-164.
14. 2-in-water emulsions. J. Am. Chem. Soc. 2003, 125:14473-14481.
15. Normatov J., Silverstein M.S. Porous interpenetrating network hybrids synthesized within high internal phase emulsions. Polymer 2007, 48:6648-6655.
16. Cameron N.R. High internal phase emulsion templating as a route to well-defined porous polymers. Polymer 2005, 46:1439-1449.
17. Cameron N.R., Sherrington D.C. High internal phase emulsions (HIPEs)-structure, properties and use in polymer preparation. Adv. Polym. Sci. 1996, 126:163-214.
18. Bokhari M., Carnachan R.J., Przyborski S.A., Cameron N.R. Emulsion-templated porous polymers as scaffolds for three dimensional cell culture: effect of synthesis parameters on scaffold formation and homogeneity. J. Mater. Chem. 2007, 38:4088-4094.
19. Cameron N.R., Barbetta A. The influence of porogen type on the porosity, surface area and morphology of poly(divinylbenzene) polyHIPE foams. J. Mater. Chem. 2000, 10:2466-2471.
20. Wang J., Zhang C., Du Z., Xiang A., Li H. Formation of porous epoxy monolith via concentrated emulsion polymerization. J. Colloid Interface Sci. 2008, 325:453-458.
21. Wang J., Zhang C., Du Z., Xiang A., Li H. Interconnected porous epoxy monoliths prepared by concentrated emulsion templating. J. Colloid Interface Sci. 2009, 338:145-150.
22. Aronhime M.T., Peng X., Gillham J.K., Small R.D. Effect of time-temperature path of cure on the water absorption of high Tg epoxy resins. J. Appl. Polym. Sci. 1986, 32:3589-3626.
23. Zhou J., Lucas J.P. Hygrothermal effects of epoxy resin. Part I: the nature of water in epoxy. Polymer 1999, 40:5505-5512.
24. Nunez L., Villanueva M., Fraga F., Nunez M.R. Influence of water absorption on the mechanical properties of a DGEBA (n=0)/1, 2 DCH epoxy system. J. Appl. Polym. Sci. 1999, 74:353-358.
25. Xiao G.Z., Delamar M., Shanahan M.E.R. Irreversible interactions between water and DGEBA/DDA epoxy resin during hygrothermal aging. J. Appl. Polym. Sci. 1997, 65:449-458.
26. Zhang W., Chu P.K., Ji J., Zhang Y., Liu X., Fu R.K.Y., Ha P.C.T., Yan Q. Plasma surface modification of poly vinyl chloride for improvement of antibacterial properties. Biomaterials 2006, 27:44-51.
27. Balazs D.J., Hollenstein C., Mathieu H.J. Fluoropolymer coating of medical grade poly(vinyl chloride) by plasma-enhanced chemical vapor deposition techniques. Plasma Process. Polym. 2005, 2:104-111.
28. Tan Q., Ji J., Zhao F., Fan D.Z., Sun F.Y., Shen J.C. Fabrication of thromboresistant multilayer thin film on plasma treated poly (vinyl chloride) surface. J. Mater. Sci. Mater. Med. 2005, 16:687-692.
29. Audic J.L., Poncin-Epaillard F., Reyx D., Brosse J.C. Cold plasma surface modification of conventionally and nonconventionally plasticized poly(vinyl chloride)-based flexible films: global and specific migration of additives into isooctane. J. Appl. Polym. Sci. 2001, 79:1384-1393.
30. Jayakrishna A., Sunny M.C. Phase transfer catalysed surface modification of plasticized poly(vinyl chloride) in aqueous media to retard plasticizer migration. Polymer 1996, 37:5213-5218.
31. Lakshmi S., Jayakrishnan A. Properties and performance of sulfide-substituted plasticized poly(vinyl chloride) as a biomaterial. J. Biomed. Mater. Res. B: Appl. Biomater. 2003, 65B:204-210.
32. Balazs D.J., Triandafillu K., Chevolot Y., Aronsson B.O., Harms H., Descouts P., Mathieu H.J. Surface modification of PVC endotracheal tubes by oxygen glow discharge to reduce bacterial adhesion. Surf. Interface Anal. 2003, 35:301-309.
33. Lakshmi S., Jayakrishnan A., Migration Resistant Blood-compatible plasticized polyvinyl chloride for medical and related applications. Artif. Organs 1998, 22:222-229.
34. Ogiwara Y., Kanda M., Takumi M., Kubota H. Photosensitized grafting on polyolefin films in vapor and liquid phases. J. Polym. Sci. C: Polym. Lett. 1981, 19:457-462.
35. Ma H., Davis R.H., Bowman C.N. A novel sequential photoinduced living graft polymerization. Macromolecules 2000, 33:331-335.
36. Ulbricht M., Matuschewski H., Oechel A., Hicke H.G. Photo-induced graft polymerization surface modifications for the preparation of hydrophilic and low-protein-adsorbing ultrafiltration membranes. J. Membr. Sci. 1996, 115:31-47.
37. Ulbricht M., Yang H. Porous polypropylene membranes with different carboxyl polymer brush layers for reversible protein binding via surface-initiated graft copolymerization. Chem. Mater. 2005, 17:2622-2631.
38. Sergienko A.Y., Tai H., Narkis M., Silverstein M.S. Polymerized high internal-phase emulsions: properties and interaction with water. J. Appl. Polm. Sci. 2002, 84:2018-2027.
39. Liu T.Y., Chen S.Y., Lin Y.L., Lin D.M., Synthesis Characterization of amphiphatic carboxymethyl-hexanoyl chitosan hydrogel: water-retention ability and drug encapsulation. Langmuir 2006, 22:9740-9745.
40. Han H.S., Tan K.L., Kang E.T. Fluorination of epoxy surfaces by a physical method. J. Appl. Polym. Sci. 2000, 76:296-304.
41. Lee S.D., Hsiue G.H., Chang P.C.T., Kao C.Y. Plasma-induced grafted polymerization of acrylic acid and subsequent grafting of collagen onto polymer film as biomaterials. Biomaterials 1996, 17:1599-1608.