Influence of Veneering Materials on the Marginal Fit and Fracture Resistance of an Alumina Core System

Journal of Prosthodontics

Volumn 20, Issue 1, 2011, Pages 45-51

  Fahmy, Nadia Oogonek ^a  

^a October 6 University   (Egypt)

Author keywords

All ceramic; Alumina core; Core veneer interface; Fracture resistance; Marginal gap; Veneering material

Indexed keywords

ALUMINUM OXIDE; BIOMEDICAL AND DENTAL MATERIALS; IN CERAM ALUMINA; IN-CERAM ALUMINA; VITA VM7; VITADUR ALPHA; VITADUR N;

ARTICLE; CERAMICS; CHEMISTRY; CLINICAL TRIAL; COMPARATIVE STUDY; CONTROLLED CLINICAL TRIAL; CONTROLLED STUDY; DENTAL CARE; DENTAL SURGERY; DENTURE; ELECTRON PROBE MICROANALYSIS; ENDODONTICS; HUMAN; IMAGE PROCESSING; INSTRUMENTATION; MATERIALS TESTING; MECHANICAL STRESS; PHOTOGRAPHY; RANDOMIZED CONTROLLED TRIAL; SCANNING ELECTRON MICROSCOPY; SURFACE PROPERTY; TOOTH PROSTHESIS;

ALUMINUM OXIDE; CERAMICS; DENTAL MARGINAL ADAPTATION; DENTAL MATERIALS; DENTAL PORCELAIN; DENTAL RESTORATION FAILURE; DENTAL STRESS ANALYSIS; DENTAL VENEERS; ELECTRON PROBE MICROANALYSIS; HUMANS; IMAGE PROCESSING, COMPUTER-ASSISTED; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING; PHOTOGRAPHY; STRESS, MECHANICAL; SURFACE PROPERTIES;

EID: 78751527858     PISSN: 1059941X     EISSN: 1532849X     Source Type: Journal    
DOI: 10.1111/j.1532-849X.2010.00626.x     Document Type: Article

References (45)

1. Anusavice KJ: Phillips' Science of Dental Materials (ed 11). Philadelphia, Saunders, 2003, pp. 93, 671, 691, 700
2. Yoshinari M, Derand T: Fracture strength of all-ceramic crowns. Int J Prosthodont 1994;7:329-338
3. Probster L: Compressive strength of two modern all-ceramic crowns. Int J Prosthodont 1992;5:409-414
4. Giordano RA, Pelletier L, Campbell S, et al: Flexural strength of infused ceramic, glass ceramic and feldspathic porcelain. J Prosthet Dent 1995;73:411-418
5. Walton JN, Gardiner FM, Agar JR: A survey of crown and fixed partial dentures failures: length of service and reasons for replacement. J Prosthet Dent 1988;56:416-421
6. Levy H: Working with the In-Ceram porcelain system. Prosthese Dent 1990;44-45:1-11
7. Sorensen J, Torres T, Kang S, et al: Marginal fidelity of ceramic crowns with different margin designs. J Dent Res 1990;69:279 Abstract No 1865
8. Shearer B, Gough MB, Setchell DJ: Influence of margin configuration and porcelain addition on the fit of Inceram crowns. Biomaterials 1996;17:1891-1895
9. Goodacre CJ, Campagini WV, Aquilino SA: Tooth preparations for complete crowns, an art form based on scientific principles. J Prosthet Dent 2001;85:363-376
10. Castellani D, Baccetti T, Clauser C, et al: Thermal distortion of different materials in crown construction. J Prosthet Dent 1994;72:360-366
11. Yeo IS, Yang Jae-Ho, Lee JB: In vitro marginal fit of three all-ceramic crown systems. J Prosthet Dent 2003;90:459-464
12. Hung SH, Hung KS, Eick JD, et al: Marginal fit of porcelain-fused-to-metal and two types of ceramic crowns. J Prosthet Dent 1990;63:26-31
13. Vahidi F, Egloff ET, Panno FV: Evaluation of marginal adaptation of all-ceramic crowns and metal ceramic crowns. J Prosthet Dent 1991;63:426-431
14. Hunter AJ, Hunter AR: Gingival margins for crowns: a review and discussion. Part II: discrepancies and configurations. J Prosthet Dent 1990;64:636-642
15. Mclean JW, von Fraunhofer JA: The estimation of cement film thickness by an in vivo technique. Br Dent 1971;131:107-111
16. Kappert HF, Altvater A: A field study on the accuracy of fit and marginal seal of Inceram crown and bridges. Dtsch O{ogonek}ahnarzt 1991;46:151-153
17. Sulaiman F, Chai J, Jameson L, et al: A comparison of the marginal fit of in-ceram, IPS empress and procera. Int J Prosthodont 1997;10:478-484
18. Beschnidt SM, Strub JR: Evaluation of the marginal accuracy of different all-ceramic crown systems after simulation in the artificial mouth. J Oral Rehabil 1999;26:582-593
19. Pera P, Gilodi S, Bassi F, et al: In vitro marginal adaptation of alumina porcelain ceramic crowns. J Prosthet Dent 1994;72:585-590
20. Balkaya MC, Cinar A, Pamuk S: Influence of firing cycles on the marginal distortion of 3 all-ceramic crown systems. J Prosthet Dent 2005;93:346-355
21. Groten M, Girthofer S, Pröbster L: Marginal fit consistency of copy-milled all-ceramic crowns during fabrication by light and scanning electron microscopic analysis in vitro. J Oral Rehabil 1997;24:871-881
22. Yeo IS, Yang JH, Lee JB: In vitro marginal fit of three all ceramic crown systems. J Prosthet Dent 2003;90:459-464
23. Rinke S, Behi F, Hüls A: Fitting accuracy of all-ceramic posterior crowns produced with three different systems. J Dent Res 2001;80:651
24. Quintas AF, Oliveira F, Bottino MA: Vertical marginal discrepancy of ceramic copings with different ceramic materials, finish lines and luting agents: an in vitro evaluation. J Prosthet Dent 2004;92:250-257
25. Grey NJ, Paddock V, Wilson MA: In vitro comparison of conventional crowns and a new all-ceramic system. J Dent 1993;21:47-51
26. Campbell SD, Pelletier LB, Pober RL, et al: Dimensional and formation analysis of a restorative ceramic and how it works. J Prosthet Dent 1995;10:332-340
27. Campbell SD: A comparative strength study of metal ceramic and all-ceramic esthetic material: modulus of rupture. J Prosthet Dent 1989;62:476-479
28. Kelly J, Tesk J, Sorensen J: Failure of all-ceramic fixed partial dentures in vitro and in vivo: analysis and modeling. J Dent Res 1995;74:1253-1258
29. Smith T, Kelly J, Tesk J: In vitro fracture behavior of ceramic and metal-ceramic restorations. J Prosthodont 1994;3:138-144
30. Isgro G, Pallav P, Oogonekel JM, et al: The influence of the veneering porcelain and different surface treatments on the biaxial flexural strength of a heat-pressed ceramic. J Prosthet Dent 2003;905:465-473
31. Kappert H, Knode H: InCeram: testing a new ceramic material. Quintessence Dent Techno 1993;16:87-97
32. Groten M, Axmann D, Probster L, et al: Determination of the minimum number of marginal gap measurements required for practical in vitro testing. J Prosthet Dent 2000;83:41-49
33. Sorensen J: A standardized method for determination of crown margin fidelity. J Prosthet Dent 1990;64:18-24
34. McLaren EA, Giordano RA, Pober R, et al: Material testing and layering techniques of a new two-phase all-glass veneering porcelain for bonded porcelain and high-alumina frameworks. Quintessence Dent Technol 2003;26:69-81
35. Thompson GA: Influence of relative layer height and testing method on the failure mode and origin in a bilayered dental ceramic composite. Dent Mater 2000;16:235-243
36. White SN, Caputo AA, Vidjak FM, et al: Moduli of rupture of layered dental ceramics. Dent Mater 1994;10:52-58
37. Carrier DD, Kelly JR: Inceram failure behavior and core-veneer interface quality as influenced by residual infiltration glass. J Prosthodont 1995;4:237-242
38. Kelly JR: Clinically relevant approach to failure testing of all-ceramic restorations. J Prosthet Dent 1999;81:652-660
39. Guazzato M, Albakry M, Swain MV, et al: Mechanical properties of in-ceram alumina and in-ceram-zirconia. Int J Prosthodont 2002;15:339-348
40. Guazzato M, Proos K, Sara G, et al: Strength, reliability and mode of fracture of bilayered porcelain/core ceramics. Int J Prosthodont 2004;17:142-149
41. Wakabayashi N, Anusavice KJ: Crack initiation modes in bilayered alumina/porcelain discs as a function of core/veneer thickness ratio and supporting substrated stiffness. J Dent Res 2000;79:1398-1040
42. Riley EJ: Ceramo-metal restoration. State of the science. Dent Clin North Am 1977;21:669-682
43. Kelly JR, Giordano R, Pober R, et al: Fracture surface analysis of dental ceramics. Int J Prosthodont 1990;3:430-440
44. Castellani D, Baccetti G, Bernardini UD: Resistance to fracture of metal ceramic and all-ceramic crowns. Int J Prosthodont 1994;7:149-154
45. Blatz MB: Long-term clinical success of all-ceramic posterior restorations. Quintessence Int 2002;33:415-426