Flow characteristics and viscosity functions in asphalt binders modified by wax

International Journal of Pavement Research and Technology

Volumn 2, Issue 2, 2009, Pages 51-60

  Giuliani, Felice ^a   Merusi, Filippo ^a  

^a UNIVERSITY OF PARMA   (Italy)

Author keywords

Asphalt binders rheology; Linear viscoelastic behavior; Organic additives; Viscosity; Warm mix asphalt (WMA); Waxes

Indexed keywords

ASPHALT BINDERS; ASPHALT BINDERS RHEOLOGY; ASPHALT PRODUCTION; CHEMICAL STRUCTURE; COMPACTION TEMPERATURE; COMPLEX BEHAVIOR; COMPLEX VISCOSITY; DYNAMIC PROPERTY; FLOW CHARACTERISTIC; LINEAR VISCOELASTIC; LINEAR VISCOELASTIC BEHAVIOR; LOW FREQUENCY DOMAIN; MASTER CURVE; MODIFIED BINDERS; NEWTONIANS; ORGANIC ADDITIVES; PAVEMENT CONSTRUCTION; PAVEMENT ENGINEERING; PHYSICAL CHARACTERISTICS; RHEOLOGICAL ANALYSIS; RHEOLOGICAL BEHAVIORS; RHEOLOGICAL TESTING; SERVICE TEMPERATURE; TECHNICAL SOLUTIONS; VISCOELASTIC PROPERTIES; VISCOSITY FUNCTION; VISCOUS DEFORMATION; WARM MIX ASPHALT (WMA);

ASPHALT; BINDERS; ELASTICITY; PAVEMENTS; PLASTICITY; RHEOLOGY; VISCOMETERS; VISCOSITY MEASUREMENT;

VISCOSITY;

EID: 78651581721     PISSN: 19966814     EISSN: 19971400     Source Type: Journal    
DOI: None     Document Type: Article

References (40)

1. Hurley, G.C. and Prowell, B.D., (2006). Evaluation of Potential Process for Use in Warm Mix Asphalt, The Journal of the Association of Asphalt Paving Technologists, 75, pp. 42-90.
2. Butz, T, (2004). Warm Asphalt Mix - Technologies, Researches and Experience. Proceedings of the Polish Road Congress, I Kongres Drogowy - 1st Polish Congress, Poland.
3. You, Z.P. and Goh, S.W, (2008). Laboratory Evaluation of Warm Mix Asphalt: A Preliminary Study. International Journal of Pavement Research and Technology, 1(1), pp. 34-40.
4. Edwards, Y. and Isacsson, U., (2005). Wax in Bitumen. Part 1 - Classification and General Aspects, Road Materials and Pavement Design, 6(3), pp 281-309.
5. Warm, A.B., (1956). The Chemistry and Technology of Waxes, Reinhold, NY, USA.
6. Edwards, Y. and Redelius, P., (2003). Rheological Effects of Waxes in Bitumen, Energy & Fuels, 17(3), pp. 511-520.
7. Lu, X., Langton, M., Olofsson, P., and Redelius, P., (2005). Wax Morphology in Bitumen, Journal of Materials Science, 40(8), pp. 1893-1900.
8. Redelius, P., Lu, X., and Isacsson, U., (2002). Non-Classical Wax in Bitumen, Road Materials and Pavement Design, 3(1), pp. 7-21.
9. Edwards, Y, (2005). Influence of Waxes on Bitumen and Asphalt Concrete Mixtures Performance, Ph.D. Dissertation, KTH Architecture and the Built Environment, Sweden.
10. nd TRB Annual Meeting, Transportation Research Board, Washington DC, USA, CD-ROM, paper No. 03-3157.
11. Lu, X., Kalman, B., and Redelius, P., (2008). A New Test Method for Determination of Wax Content in Crude Oils, Residues and Bitumen, Fuel, 87(8-9), pp. 1543-1551.
12. Lee, H.N. and Wong, W.G., (2009). Effect of Wax on Basic and Rheological Properties of Bitumen with Similar Penetration-Grades, Construction and Building Materials, 23(1), pp. 507-514.
13. Edwards, Y and Isacsson, U., (2005). Wax in Bitumen. Part 2 -Characterization and Effects, Road Materials and Pavement Design, 6(4), pp. 439-468.
14. Edwards, Y, Tasdemir, Y, and Isacsson, U., (2006). Rheological Effects of Commercial Waxes and Polyphosphoric Acid in Bitumen 160/220 - Low Temperature Performance, Fuel, 85(7-8), pp. 989-997.
15. Edwards, Y, Tasdemir, Y, and Isacsson, U., (2007). Rheological Effects of Commercial Waxes and Polyphosphoric Acid in Bitumen 160/220 - High and Medium Temperature Performance, Construction and Building Materials, 21(10), pp. 1899-1908.
16. D'Angelo J., Harm E., Bartoszek J., Baumgardner G, Harman T, Jamshidi M., Jones W, Newcomb D., Prowell D., Sines R., and Yeaton B., (2008). Warm-Mix Asphalt: European Practice, Report No. FHWA-PL-08-007, US Department of Transportation - Federal Highway Administration, USA.
17. CEDEX (Centro de Estudio y Experimentacion de Obras Publicas), (2004). Influencia de la Utilizacion de Betunes Asfalticos Modificados con Sasobit en la Mezclas Bituminosas, Technical report, Madrid, Spain.
18. Diefenderfer, S.D., McGhee, K.K., and Donaldson, B.M., (2007). Installation of Warm Mix Asphalt Projects in Virginia, Report No. VTRC 07-R25, Virginia Transportation Research Council, Virginia DOT, Charlottesville, VA, USA.
19. rd Euroasphalt and Eurobitume Congress, Vienna, Austria.
20. th Euroasphalt and Eurobitume Congress, Copenhagen, Denmark.
21. ® for Use in Warm Mix Asphalt, NCAT Report 05-06, National Center for Asphalt Technology, Auburn University, Auburn, Alabama, USA.
22. th TRB Annual Meeting, Transportation Research Board, Washington DC, USA, CD-ROM, Paper No. 00-1360.
23. Soenen, H., De Visscher, J., Vanelstraete, A., and Redelius, R, (2006). Influence of Thermal History on Rheological Properties of Various Bitumen, Rehologica Acta, 45(5), pp. 729-739.
24. Bahia, H.U., Hanson, D.I., Zeng, M., Zhai, H., Khatri, M.A., and Anderson, R.M., (2001). Characterization of Modified Binders in Superpave Mix Design, NCHRP Project 9-10, Transportation Research Board - National Research Council, Washington DC, USA.
25. Yildirim, Y, Solaimanian, M., and Kennedy, T.W, (2000). Mixing and Compaction Temperatures for Hot Mix Asphalt Concrete, Research Project 0-1250-5, South Central Superpave Center, Center for Transportation Research, The University of Texas at Austin, Texas, USA.
26. Khatri, A., Bahia, H.U., Hanson, D. (2001). Mixing and compaction temperatures for modified binders using the Superpave gyratory compactor. Journal of the Association of Asphalt Paving Technologists, 70, pp. 368-402.
27. Anderson, D.A., Cristensen, D.W, Bahia, H.U., Dongre, R., Sharma, M.G., Antle, C, and Button, J., (1994). Binder Characterization and Evaluation, Volume 3: Physical Characterization, SHRP-A-369, Strategic Highways Research Program, National Research Council, Washington DC, USA.
28. th TRB Annual Meeting, Transportation Research Board, Washington DC, USA, CD-ROM, Paper No. 00-1374.
29. Airey, G.D., Rahimzadeh, B., and Collop, A.C., (2003). Viscoelastic Linearity Limits for Bituminous Materials, Materials and Structures, 36(10), pp. 643-647.
30. Stastna, J., Zanzotto, L., and Vacin, O.J., (2003). Viscosity Function in Polymer-Modified Asphalts, Journal of Colloid and Interface Science, 259(1), pp. 200-207.
31. f Euroasphalt and Eurobitume Congress, Copenhagen, Denmark.
32. rd Euroasphalt and Eurobitume Congress, Vienna, Austria.
33. rd Euroasphalt & Eurobitume Congress, Wien, Austria.
34. Anderson, D.A., Le Hir, Y.M., Planche, J.P., and Martin, D., (2002). Zero-Shear Viscosity of Asphalt Binders, Transportation Research Record, No. 1810, pp. 54-62.
35. Bahia, H.U., Zhai, H., Zeng, M., Yu, H., and Turner, P., (2001). Development of Binder Specification Parameter Based on Characterization of Damage Behavior, Journal of the Association of Asphalt Paving Technologists, 70, pp. 442-470.
36. th International Conference on Asphalt Pavement, International Society of Asphalt Pavement, Copenhagen, Denmark.
37. Sybilski, D., (1996). Zero-Shear Viscosity of Bituminous Binders and Its Relation to Bituminous Mixtures Rutting Resistance, Transportation Research Record, No. 1535, pp. 15-21.
38. Marasteanu, M.O. (2007). Emerging methods in asphalt binder rheological characterization. Road Materials and Pavement Design, 8, No.7/2007, pp. 257-284.
39. Polacco, G, Stastna, J., Vlachovicova, Z., Biondi, D., and Zanzotto, L., (2004). Temporary Network in Polymer-Modified Asphalts, Polymer Engineering and Science, 44(12), pp. 2185-2193.
40. Polacco, G, Stastna, J., Biondi, D., and Zanzotto, L., (2006). Relation between Polymer Architecture and Non-Linear Viscoelastic Behavior of Modified Asphalts, Current Opinion in Colloid and Interface Science, 11(4), pp. 230-245.