On the Measurement and Prediction of the Out-of-Plane Displacement Surrounding Cold-Expanded Holes

Experimental Mechanics

Volumn 51, Issue 1, 2011, Pages 11-22

  D'Acquisto, L ^a   Pasta, S ^a  

^a UNIVERSITY OF PALERMO   (Italy)

Author keywords

Binary encoded light stripe projection; Cold expansion of holes; Displacement measurements; Finite element

Indexed keywords

ANALYTICAL MODEL; ANALYTICAL RESULTS; ANALYTICAL SOLUTIONS; CHANGE IN THICKNESS; COLD-EXPANSION OF HOLES; CONTROL TECHNIQUES; DISPLACEMENT MEASUREMENTS; ELASTIC-PLASTIC; EXPANDED HOLES; EXPANSION PROCESS; EXPERIMENTAL APPROACHES; EXPERIMENTAL DATA; EXPERIMENTAL MEASUREMENTS; FE ANALYSIS; FE MODEL; FINITE ELEMENT; FINITE ELEMENT MODELS; HOLE EDGE; LIGHT STRIPE PROJECTION; MANUFACTURING PROCESS; NUMERICAL SOLUTION; OPTICAL SCANNERS; OUT-OF-PLANE DISPLACEMENT; PATTERN PROJECTION; SURFACE PROFILES; WHITE LIGHT; BINARY ENCODED LIGHT STRIPE PROJECTIONS; COLD EXPANDED HOLES; COLD EXPANSION; COLD-EXPANSION OF HOLE; DISPLACEMENTS MEASUREMENTS; FINITE ELEMENT MODELLING (FEM); MEASUREMENTS OF;

EXPANSION; IRON ALLOYS; LASER RECORDING; MATHEMATICAL MODELS; MODELS; QUALITY CONTROL; SCANNING; THREE DIMENSIONAL; ALUMINUM ALLOYS; ANALYTICAL MODELS; DISPLACEMENT MEASUREMENT; ELASTOPLASTICITY; FINITE ELEMENT METHOD;

FINITE ELEMENT METHOD; QUALITY CONTROL;

EID: 78651433461     PISSN: 00144851     EISSN: 17412765     Source Type: Journal    
DOI: 10.1007/s11340-009-9326-6     Document Type: Article

References (31)

1. FTI Process Specification 8101D (1994) Cold expansion of holes using the standard split sleeve system and countersink cold expansion. Fatigue Technology Inc. (www. fatiguetech. com).
2. Stefanescu D, Edwards L, Fitzpatrick ME (2002) X-ray diffraction measurement of residual stresses surrounding a cold expanded hole. Mater Sci Forum 404-407: 185-190.
3. Nadai A (1943) Theory of the expanding of boiler and condenser tube joints through rolling. Trans ASME 65: 865-880.
4. Guo W (1993) Elastic-plastic analysis of a finite sheet with a cold-worked hole. Eng Fract Mech 46: 465-472.
5. Hsu YC, Forman RG (1975) Elastic-plastic analysis of an infinite sheet having a circular hole under pressure. J Appl Mech 42: 347-352.
6. Rich DL, Impellizzeri LF (1977) Fatigue analysis of cold-worked and interference fit fastener holes, cyclic stress-strain and plastic deformation aspects of fatigue crack growth. ASTM STP 637: 153-175.
7. Ball DL (1995) Elastic-plastic stress analysis of cold expanded fastener holes. Fat Frac Eng Mat Struct 18: 47-63.
8. Pasta S (2007) Fatigue crack propagation from a cold-worked hole. Eng Fract Mech 74: 1525-1538.
9. Pavier MJ, Poussard GC, Smith DJ (1985) A finite element simulation of the cold-expansion process for fastener holes. J Strain Anal 32(4): 287-300.
10. Pavier MJ, Poussard GC, Smith DJ (1998) Finite element modeling of the interaction of residual stress with mechanical load for a crack emanating from a cold worked fastener hole. J Strain Anal 33(4): 275-289.
11. de Matos PFP, Moreira PMGP, Camanho PP, de Castro PMST (2005) Numerical simulation of cold working of rivet holes. Finite Elem Anal Des 41: 989-1007.
12. Nigrelli V, Pasta S (2008) Finite-element simulation of residual stress induced by split-sleeve cold-expansion process of holes. J Mat Proc Tech 205: 290-296.
13. Ozdemir AT, Edwards L (1996) Measurements of the three-dimensional residual stress distribution around split-sleeve cold-expanded holes. J Strain Anal 31(6): 413-421.
14. Zhang Y, Fitzpatrick ME, Edwards L (2002) Measurement of the residual stresses around a cold expanded hole in an EN8 steel plate using the contour method. Mat Sci For 404-407: 527-534.
15. Prime MB, Sebring RJ, Edwards JM, Hughes DJ, Webster PJ (2004) Laser surface-contouring and spline data-smoothing for residual stress measurement. Exp Mech 44(2): 176-184.
16. Priest M, Poussard CG, Pavier MJ, Smith DJ (1995) An assessment of residual-stress measurements around cold-worked holes. Exp Mech 35(4): 361-366.
17. Pina JCP, Dias AM, de Matos PFP, Moreira PMGP, de Castro PMST (2005) Residual stress analysis near a cold expanded hole in a texture Alclad sheet using X-ray diffraction. Exp Mech 45(1): 83-88.
18. Stefanescu D, Steuwer A, Owen RA, Nadri B, Edwards L, Fitzpatrick ME, Withers PJ (2004) Elastic strains around cracked cold-expanded fastener holes measured using the synchrotron X-ray diffraction technique. J Strain Anal 39(5): 459-469.
19. Stefanescu D (2003) Experimental study of double cold expansion of holes. J Strain Analysis 38(4): 339-347.
20. Sanford RJ, Link RE (1989) Holographic measurement of the elastic-plastic boundary surrounding cold-expanded holes. J Strain Anal 24(2): 103-106.
21. Cirello A, Pasta S (2008) Displacement measurement through digital image correlation and digital speckle pattern interferometry techniques in cold-expanded holes. Strain. doi: 10. 1111/j. 1475-1305. 2008. 00469. x.
22. Poolsuk S, JrWN S (1978) Measurement of the elastic-plastic boundary around coldworked fastener holes. J App Mech Trans ASME 45(3): 515-520.
23. Mangasarian OL (1960) Stress in the plastic range around a normally loaded circular hole in an infinite sheet. J App Mech 27: 65-74.
24. Budiansky B (1959) A reassessment of deformation theories of plasticity. J App Mech 81: 259-264.
25. ASTM (2000) Standard test method for tensile strain-hardening exponents (n-values) of metallic sheet materials. ASTM E 646: 607-613.
26. COMET5 technical data. Steinbichler Optotechnik, Neubeuern. (http://www. steinbichler. de).
27. VDI/VDE 2634 Part 2: Optical 3D measuring systems-optical systems based on area scanning, VDI/VDE Society of Measuring and Automation Techniques, VDI/VDE guidelines, Düsseldorf, August, 2002.
28. Rhinoceros practical guide. Rhinoceros®. (www. rhino3d. com).
29. Jeffrey Fluhrer. DEFORM™ 3D Version 5. 03 Design environment for FORMing. Scientific Forming Technologies Corporation 2003.
30. Bauschinger J (1881) Civilingenieur 27: 289.
31. Forcellese A, Fratini L, Gabrielli F, Micari F (1998) The evaluation of springback in 3D stamping and coining processes. J Mater Process Technol 80-81: 108-112.