Multiobjective optimization of a grooved micro-channel heat sink

IEEE Transactions on Components and Packaging Technologies

Volumn 33, Issue 4, 2010, Pages 767-776

  Ansari, Danish ^a   Husain, Afzal ^a   Kim, Kwang Yong ^a  

^a Inha University   (South Korea)

Author keywords

Electronic cooling; groove; heat transfer enhancement; micro channel; optimization

Indexed keywords

CONJUGATE HEAT TRANSFER; DESIGN VARIABLES; ELECTRONIC COOLING; ENERGY EQUATION; FINITE-VOLUME; GROOVE; GROOVE DEPTH; HEAT TRANSFER ENHANCEMENT; MULTI OBJECTIVE EVOLUTIONARY ALGORITHMS; NAVIER STOKES; OBJECTIVE FUNCTIONS; PARETO-OPTIMAL FRONT; POWER CHARACTERISTIC; PUMPING POWER; SENSITIVE VARIABLES; THERMAL RESISTANCE;

FLIGHT DYNAMICS; HEAT RESISTANCE; HEAT SINKS; LAMINAR FLOW; NAVIER STOKES EQUATIONS; NUSSELT NUMBER; PARETO PRINCIPLE; PUMPS; SHAPE OPTIMIZATION;

MULTIOBJECTIVE OPTIMIZATION;

EID: 78651104673     PISSN: 15213331     EISSN: None     Source Type: Journal    
DOI: 10.1109/TCAPT.2010.2070874     Document Type: Article

References (30)

1. D. B. Tuckerman and R. F. W. Pease, "High-performance heat sinking for VLSI," IEEE Electron Device Lett., vol. 2, no. 5, pp. 126-129, May 1981.
2. M. B. Kleiner, A. K. Stefan, and K. Haberger, "High performance forced air cooling scheme employing microchannel heat exchangers," IEEE Trans. Compon. Packag. Technol.: Part A, vol. 18, no. 4, pp. 795-804, Dec. 1995.
3. V. K. Samalam, "Convective heat transfer in microchannels," J. Electron Mater., vol. 18, no. 5, pp. 611-618, 1989.
4. W. Qu and I. Mudawar, "Analysis of three-dimensional heat transfer in micro-channel heat sinks," Int. J. Heat Mass Transfer, vol. 45, no. 19, pp. 3973-3985, 2002. (Pubitemid 34792334)
5. W. Qu and I. Mudawar, "Experimental and numerical study of pressure drop and heat transfer in a single-phase micro-channel heat sink," Int. J. Heat Mass Transfer, vol. 45, no. 12, pp. 2549-2565, 2002.
6. A. G. Fedorov and R. Viskanta, "Three-dimensional conjugate heat transfer in the microchannel heat sink for electronic packaging," Int. J. Heat Mass Transfer, vol. 43, no. 3, pp. 399-415, Feb. 2000.
7. X. J. Wei, Y. K. Joshi, and P. M. Ligrani, "Numerical simulation of laminar flow and heat transfer inside a microchannel with one dimpled surface," J. Electron. Packag., vol. 129, no. 1, pp. 63-70, 2007.
8. D. Park, C. Silva, E. Marotta, and L. Fletcher, "Study of laminar forced convection heat transfer for dimpled heat sink," J. Thermophys. Heat Transfer, vol. 22, no. 2, pp. 262-270, 2008.
9. X.-Q. Wang, C. Yap, and A. S. Mujumdar, "Effects of two-dimensional roughness in flow in microchannels," J. Electron. Packag., vol. 127, no. 3, pp. 357-361, 2005.
10. P. M. Ligrani, M. M. Oliveira, and T. Blaskovich, "Comparison of heat transfer augmentation techniques," AIAA J., vol. 41, no. 3, pp. 337-362, 2003.
11. A. Husain and K.-Y. Kim, "Microchannel heat sink with designed roughness: Analysis and optimization," J. Thermophys. Heat Transfer, vol. 22, no. 3, pp. 342-351, 2008.
12. H. R. Upadhye and S. G. Kandlikar, "Optimization of microchannel geometry for direct chip cooling using single phase heat transfer," in Proc. 2nd Int. Conf. Microchannels Minichannels, Jun. 2004, pp. 679-685.
13. J. H. Ryu, D. H. Choi, and S. J. Kim, "Numerical optimization of the thermal performance of a microchannel heat sink," Int. J. Heat Mass Transfer, vol. 45, no. 13, pp. 2823-2827, 2002.
14. A. Husain and K.-Y. Kim, "Shape optimization of micro-channel heat sink for micro-electronic cooling," IEEE Trans. Compon. Packag. Tech-nol., vol. 31, no. 2, pp. 322-330, Jun. 2008.
15. R. W. Knight, D. J. Hall, J. S. Goodling, and R. C. Jaeger, "Heat sink optimization with application to microchannels," IEEE Trans. Compon. Hybrids Manuf. Technol., vol. 15, no. 5, pp. 832-842, Oct. 1992.
16. J. Li and G. P. Peterson, "Geometric optimization of a micro heat sink with liquid flow," IEEE Trans. Compon. Packag. Technol., vol. 29, no. 1, pp. 145-154, Mar. 2006.
17. X. Wei and Y. Joshi, "Optimization study of stacked micro-channel heat sinks for micro-electronic cooling," IEEE Trans. Compon. Packag. Technol., vol. 26, no. 1, pp. 55-61, Mar. 2003.
18. F. P. Incropera and D. P. DeWitt, Fundamentals of Heat and Mass Transfer. New York: Wiley, 2002.
19. ANSYS CFX, Software Package, Ver. 11.0. Canonsburg, PA: ANSYS, 2006.
20. M. J. Raw, "Robustness of coupled algebraic multigrid for the Navier-Stokes equations," in Proc. 34th Aerospace Sci. Meet. Exhibit., Tech. Paper AIAA 96-0297, Reno, NV, Jan. 1996.
21. "JMP statistical discovery," in Software Package, Ver. 6.0.0. Cary, NC: SAS Inst., 2005.
22. M. E. Steinke and S. G. Kandlikar, "Single phase liquid heat transfer in plain and enhanced microchannels," in Proc. Int. Conf. Nanochannels, Microchannels Minichannels, 2006, no. ICNMM06-96227.
23. J. D. Martin and T. W. Simpson, "Use of Kriging models to approximate deterministic computer models," AIAA J., vol. 43, no. 4, pp. 853-863, 2005.
24. K. Deb, Multi-Objective Optimization Using Evolutionary Algorithms. Chichester, U.K.: Wiley, 2004.
25. A. Husain and K.-Y. Kim, "Optimization of a microchannel heat sink with temperature dependent fluid properties," Appl. Thermal Eng., vol. 28, nos. 8-9, pp. 1101-1107, Jun. 2008.
26. H. Herwig and S. P. Mahulikar, "Variable property effects in single-phase incompressible flows through microchannels," Int. J. Thermal Sci., vol. 45, no. 10, pp. 977-981, 2006.
27. R. K. Shah and A. L. London, Laminar Flow Forced Convection in Ducts: A Source Book for Compact Heat Exchanger Analytical Data. New York: Academic Press, 1978.
28. D. Copeland, "Optimization of parallel plate heatsinks for forced convection," in Proc. 16th IEEE Semiconductor Thermal Meas. Manage. Symp., 2000, pp. 266-272.
29. S. N. Lophaven, H. B. Nielsen, and J. Sondergaard, "DACE-A MATLAB Kriging toolbox," Tech. Univ. Denmark, Lyngby, Denmark, Tech. Rep. IMM-TR2002-12, 2002.
30. N. V. Queipo, R. T. Haftka, W. Shyy, T. Goel, R. Vaidyanathan, and P. K. Tucker, "Surrogate-based analysis and optimization," Prog. Aerospace Sci., vol. 41, no. 1, pp. 1-28, Jan. 2005.