Characterization and pervaporation dehydration of heat-treatment PAN hollow fiber membranes

Journal of Membrane Science

Volumn 368, Issue 1-2, 2011, Pages 254-263

  Tsai, Hui An ^a   Ye, Yue Ling ^b   Lee, Kueir Rarn ^b   Huang, Shu Hsien ^c   Suen, Maw Cherng ^a   Lai, Juin Yih ^b  

^a NANYA INSTITUTE OF TECHNOLOGY   (Taiwan)

^b CHUNG YUAN CHRISTIAN UNIVERSITY   (Taiwan)

^c NATIONAL ILAN UNIVERSITY   (Taiwan)

Author keywords

Heat treatment; Hollow fiber membrane; PAS; Pervaporation

Indexed keywords

AFTER-HEAT; AIR ATMOSPHERE; ANALYSIS TECHNIQUES; AQUEOUS ETHANOL SOLUTIONS; FOURIER TRANSFORM INFRARED; HEAT TREATING; HEAT TREATMENT TEMPERATURE; HOLLOW FIBER MEMBRANES; LEAD WATER; PAS; PERMEATION RATE; PERVAPORATION DEHYDRATION; POLYACRYLONITRILE HOLLOW FIBERS; POLYMER CHAINS; SEM; VOLUME VARIATION;

ETHANOL; EVAPORATION; FIBERS; FOURIER TRANSFORMS; GLYCOLS; LEAD REMOVAL (WATER TREATMENT); PERMEATION; PERVAPORATION; POSITRON ANNIHILATION SPECTROSCOPY; POSITRONS; SCANNING ELECTRON MICROSCOPY; SPINNING (FIBERS); THERMOGRAVIMETRIC ANALYSIS; WATER CONTENT;

MEMBRANES;

ALCOHOL; MACROGOL; POLYACRYLONITRILE;

AQUEOUS SOLUTION; ARTICLE; ATMOSPHERE; DEHYDRATION; HEAT TREATMENT; HOLLOW FIBER MEMBRANE; INFRARED SPECTROSCOPY; MASS SPECTROMETRY; PERVAPORATION; POROSITY; POSITRON ANNIHILATION LIFETIME SPECTROSCOPY; PRIORITY JOURNAL; SCANNING ELECTRON MICROSCOPY; THERMAL ANALYSIS; THERMOGRAVIMETRY; WATER CONTENT;

EID: 78650509816     PISSN: 03767388     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.memsci.2010.11.057     Document Type: Article

References (29)

1. Qin J.J., Chung T.S. Effect of dope flow rate on the morphology, separation performance, thermal and mechanical properties of ultrafiltration hollow fiber membranes. J. Membr. Sci. 1999, 157:35.
2. Cao C., Wang R., Chung T.S., Liu Y. Formation of high-performance 6FDA-2,6-DAT asymmetric composite hollow fiber membranes for CO2/CH4 separation. J. Membr. Sci. 2002, 209:309.
3. Tsai H.A., Huang D.H., Fan S.C., Wang Y.C., Li C.L., Lee K.R., Lai J.Y. Investigation of surfactant addition effect on the vapor permeation of aqueous ethanol mixtures through polysulfone hollow fiber membranes. J. Membr. Sci. 2002, 198:245.
4. Tsai H.A., Hong M.J., Huang G.S., Wang Y.C., Li C.L., Lee K.R., Lai J.Y. Effect of DGDE additive on the morphology and pervaporation performances of asymmetric PSf hollow fiber membranes. J. Membr. Sci. 2002, 208:233.
5. Liu R.X., Qiao X.Y., Chung T.S. Dual-layer P84/polyethersulfone hollow fibers for pervaporation dehydration of isopropanol. J. Membr. Sci. 2007, 294:103.
6. Tsai H.A., Chen W.H., Kuo C.Y., Lee K.R., Lai J.Y. Study on the pervaporation performance and long-term stability of aqueous isopropanol solution through chitosan/polyacrylonitrile hollow fiber membrane. J. Membr. Sci. 2008, 309:146.
7. Ji P., Cao Y., Zhao H., Kang G., Jie X., Liu D., Liu J., Yuan Q. Preparation of hollow fiber poly(N,N-dimethylaminoethylmethacrylate)-poly(ethylene glycol methyl ether methyl acrylate)/polysulfone composite membranes for CO2/N2 separation. J. Membr. Sci. 2009, 342:190.
8. Sandru M., Haukebø S.H., Hägg M. Composite hollow fiber membranes for CO2 capture. J. Membr. Sci. 2010, 346:172.
9. Mansourizadeh A., Ismail A.F. Effect of additives on the structure and performance of polysulfone hollow fiber membranes for CO2 absorption. J. Membr. Sci. 2010, 348:260.
10. Peng N., Chung T.S., Li K.Y. The role of additives on dope rheology and membrane formation of defect-free Torlon® hollow fibers for gas separation. J. Membr. Sci. 2009, 343:62.
11. Tsai H.A., Ciou Y.S., Hu C.C., Lee K.R., Yu D.G., Lai J.Y. Heat-treatment effect on the morphology and pervaporation performances of asymmetric PAN hollow fiber membranes. J. Membr. Sci. 2005, 255:33.
12. Zhou F.B., Koros W.J. Study of thermal annealing on Matrimid® fiber performance in pervaporation of acetic acid and water mixtures. Polymer 2006, 47:280.
13. Jiang L.Y., Chung T.S., Rajagopalan R. Dehydration of alcohols by pervaporation through polyimide Matrimid asymmetric hollow fibers with various modifications. Chem. Eng. Sci. 2008, 63:204.
14. Qiu W., Kosuri M., Zhou F., Koros W.J. Dehydration of ethanol-water mixtures using asymmetric hollow fiber membranes from commercial polyimides. J. Membr. Sci. 2009, 327:96.
15. Kung G., Jiang L.Y., Wang Y., Chung T.S. Asymmetric hollow fibers by polyimide and polybenzimidazole blends for toluene/iso-octane separation. J. Membr. Sci. 2010, 10.1016/j.memsci.2010.05.030.
16. Xu Z.K., Dai Q.W., Liu Z.M., Kou R.Q., Xu Y.Y. Microporous propylene hollow fiber membranes. II. Pervaporation separation of water/ethanol mixtures by the poly (acrylic acid) grafted membranes. J. Membr. Sci. 2003, 214:71.
17. Qin J.J., Wang R., Chung T.S. Investigation of shear stress effect within a spinneret on flux, separation and thermomechanical properties of hollow fiber ultrafiltration membranes. J. Membr. Sci. 2000, 175:197.
18. Jaffe M., Menczel J.D., Bessey W.E. Fibers. Thermal Characterization of Polymeric Materials 1997, Academic Press, New York. E.A. Turi (Ed.).
19. Chen H.M., Hung W.S., Lo C.H., Huang S.H., Cheng M.L., Liu G., Lee K.R., Lai J.Y., Sun Y.M., Hu C.C., Suzuki R., Ohdaira T., Oshima N., Jean Y.C. Free-volume depth profile of polymeric membranes studied by positron annihilation spectroscopy: layer structure from interfacial polymerization. Macromolecules 2007, 40:7542.
20. Zhang J., Chen H., Li Y., Suzuki R., Ohdaira T., Jean Y.C. Free-volume distribution and glass transition of nano-scale polymeric films. Radiat. Phys. Chem. 2007, 76:172.
21. Huang S.H., Hsu C.J., Liaw D.J., Hu C.C., Lee K.R., Lai J.Y. Effect of chemical structures of amines on physicochemical properties of active layers and dehydration of isopropanol through interfacially polymerized thin film composite membranes. J. Membr. Sci. 2008, 307:73.
22. Huang S.H., Lin W.L., Liaw D.J., Li C.L., Kao S.T., Wang D.M., Lee K.R., Lai J.Y. Characterization, transport and sorption properties of poly(thiol ester amide) thin-film composite pervaporation membranes. J. Membr. Sci. 2008, 322:139.
23. Huang S.H., Hung W.S., Liaw D.J., Li C.L., Kao S.T., Wang D.M., Guzman M.D., Hu C.C., Jean Y.C., Lee K.R., Lai J.Y. Investigation of multilayer pervaporation membrane by positron annihilation spectroscopy. Macromolecules 2008, 41:6438.
24. Kao S.T., Huang Y.H., Liao K.S., Hung W.S., Chang K.S., Guzman M.D., Huang S.H., Wang D.M., Tung K.L., Lee K.R., Lai J.Y. Applications of positron annihilation spectroscopy and molecular dynamics simulation to aromatic polyamide pervaporation membranes. J. Membr. Sci. 2010, 348:117.
25. Lo C.H., Hung W.S., Huang S.H., Guzman M.D., Rouessac V., Lee K.R., Lai J.Y. Plasma deposition of tetraethoxysilane on polycarbonate membrane for pervaporation of tetrafluoropropanol aqueous solution. J. Membr. Sci. 2009, 329:138.
26. Jean Y.C., Mallon P.E., Schrader D.M. Principles and Applications of Positron & Positronium Chemistry 2003, World Scientific Publishing Co. Pvt. Ltd., Singapore.
27. Uragami T., Yanagisawa S., Miyata T. Water/ethanol selectivity of new organic-inorganic hybrid membranes fabricated from poly(vinyl alcohol) and an oligosilane. Macromol. Chem. Phys. 2007, 208:756.
28. Kim J.J.H., Lee K.H. Effect of PEG additive on membrane formation by phase inversion. J. Membr. Sci. 1998, 138:153.
29. Chakrabarty B., Ghoshal A.K., Purkait M.K. Effect of molecular weight of PEG on membrane morphology and transport properties. J. Membr. Sci. 2008, 309:209.