A critical review of mechanical properties of powder metallurgy titanium

International Journal of Powder Metallurgy (Princeton, New Jersey)

Volumn 46, Issue 5, 2010, Pages 45-57

  Wang, Hongtao ^a   Fang, Z Zak ^a   Sun, Pei ^a  

^a UNIVERSITY OF UTAH   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALPHA PHASE; CRITICAL REVIEW; CURRENT STATUS; DYNAMIC PROPERTY; FATIGUE STRENGTH; FINE-SCALE MICROSTRUCTURES; GRAIN SIZE; OXYGEN CONTENT; POST-SINTERING; RELATIVE DENSITY; SINTERED MICROSTRUCTURE; SINTERING CYCLES; STATIC STRENGTH; TENSILE AND FATIGUE PROPERTIES; THERMO-MECHANICAL PROCESSING; TI6A14V;

ASPECT RATIO; DUCTILITY; GRAIN REFINEMENT; MICROSTRUCTURE; OXYGEN; POWDER METALLURGY; SINTERING; TITANIUM;

MECHANICAL PROPERTIES;

EID: 78650147716     PISSN: 08887462     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Review

References (104)

1. D. Eylon, F.H. Froes and S. Abkowitz, "Titanium Powder Metallurgy Alloys and Composites", ASM Handbook Vol. 7: Powder Metal Technologies and Applications, ASM International, Materials Park, OH, 1998, pp. 874-886.
2. F.H. Froes and D. Eylon, "Powder Metallurgy of Titanium Alloys", International Materials Reviews, 1990, vol. 35, no. 3, pp. 162-182.
3. M.J.J. Donachie, Titanium - A Technical Guide, 2nd edition, 2000, ASM International, Materials Park, OH.
4. C.A. Kelto, B.A. Kosmal and D. Eylon, Titanium Powder Metallurgy - a Perspective", Journal of Metals, 1980, vol. 32, no. 8, pp. 17-25.
5. S. Abkowitz, G.J. Kardys, S. Fujishiro, F.H. Froes and D. Eylon , "Titanium Alloy Shapes from Elemental Blend Powder and Tensile and Fatigue Properties of Low Chloride Compositions", Titanium Net Shape Technologies: Proc of a Symposium, edited by F.H. Froes and D. Eylon, 1984, The Metall. Soc. of AIME, Warrendale, PA, pp. 107-120.
6. S. Abkowitz, "Isotatic Pressing of Complex Shapes from Titanium and Titanium Alloys", Titanium '80, Science and Technology, Proc. of the 4th International Conference on Titanium, The Metall. Soc. of AIME, Warrendale, PA, 1980, pp. 291-302.
7. G. Abouelmagd, H.P. Büchkremer, E. El-Magd and D. Stöver, "Mechanical Properties of a TiA16V4 Alloy Processed by Powder Metallurgy", Journal of Materials Processing Technology, 1993, vol. 37, no. 1-4, pp. 583-597.
8. P.J. Andersen, V.M. Svoyatysky, F.H. Froes and Y. Mahajan, "Fracture Behavior of Blended Elemental P/M Titanium Alloys", Modern Developments in Powder Metallurgy, edited by H.H. Hausner, H.W. Ambs and G.D. Smith, Metal Powder Industries Federation, Princeton, NJ, 1981, vol. 13, pp. 537-549.
9. G.R. Chanani, W.T. Highberger, C. Kelto, C.V. Petersen and G.V. Scarich, "Application of Titanium Powder Metallurgy for Manufacture of a Large and Complex Naval Aircraft Component", Powder Metallurgy of Titanium Alloys, edited by F.H. Froes and J. Smugeresky, TMSAIME, Warrendale, PA, 1980, pp. 279-290.
10. J. Devillard and J.P. Herteman, "Evaluation of Ti-6A1-4V Powder Compacts Fabricated by the PSV Process", Highway Engineer, 1980 (Compendex), pp. 59-70.
11. E. Ergul, H.O. Gulsoy and V. Gunay, "Effect of Sintering Parameters on Mechanical Properties of Injection Moulded Ti-6A1-4V Alloys", Powder Metallurgy, 2009, vol. 52, no. 1, pp. 65-71.
12. D. Eylon and F.H. Froes, "HIP Compaction of Titanium Alloy Powders at High Pressure and Low Temperature (HPLT)", Titanium: Rapid Solidification Technology. Proc of Symposium, The Metall. Soc. of AIME, Warrendale, PA, 1986, pp. 273-289.
13. D. Eylon, F.H. Froes, D.G. Heggie, P.A. Blenkinsop and R.W. Gardiner, "Influence of Thermomechanical Processing on Low Cycle Fatigue of Prealloyed Ti-6A1-4V Powder Compacts", Metall. Trans. A, 1983, vol. 14, no. 12, pp. 2,497-2,505.
14. D. Eylon, C.A. Kelto, A.F. Hayes and F.H. Froes, "Low Temperature Compaction of Titanium Alloys by Rapid Omnidirectional Compaction (ROC)", Progress in Powder Metallurgy, edited by C.L. Freeby and H. Hjort, Metal Powder Industries Federation, Princeton, NJ, 1987, vol. 43, pp. 33-47.
15. D. Eylon, R.G. Vogt and F.H. Froes, "Property Improvement of Low Chlorine Titanium Alloy Blended Elemental Powder Compacts by Microstructure Modification", Progress in Powder Metallurgy, edited by E.A. Carson and G. Gaines, Metal Powder Industries Federation, Princeton, NJ, 1986, vol. 42, pp. 625-634.
16. H. Fujii, K. Fujisawa, K. Takahashi and T. Yamazaki, "Development of Low Cost Powder Metallurgy Process of Titanium Alloy Products", Nippon Steel Technical Report, 2002, no. 85, pp. 77-81.
17. T. Fujita, A. Ogawa, C. Ouchi and H. Tajima, "Microstructure and Properties of Titanium Alloy Produced in the Newly Developed Blended Elemental Powder Metallurgy Process", Mas. Sci. and Eng. A, 1996, vol. 213, no. 1-2, pp. 148-153.
18. S. Fusheng and O.Y. Kuang, "Development of Cost Effective Blended Elemental Powder Metallurgy Ti Alloys", Innovations in Titanium Technology, edited by M.N. Gungor, M.A. Imam and F.H. Froes, TMS, Warrendale, PA, 2007, pp. 19-28.
19. R.F. Geisendorfer, "Powder Metallurgy Titanium 6A1-4V Plate", Powder Metallurgy of Titanium Alloys, edited by F.H. Froes and J. Smugeresky, TMS-AIME, Warrendale, PA, 1980, pp. 151-162.
20. M. Hagiwara, Y. Kaieda, Y. Kawabe and S. Miura, "Fatigue Property Enhancement of α-β Titanium Alloys by Blended Elemental P/M Approach", ISI J International, 1991, vol. 31, no. 8, pp. 922-930.
21. J.P. Herteman, D. Eylon, and F.H. Froes, "Mechanical Properties of Advanced Titanium Powder Metallurgy Compacts", Powder Metallurgy International, 1985, vol. 17, no. 3, pp. 116-118.
22. O.M. Ivasishin, D.G. Sawakin, F.H. Froes and K.A. Bondareva, "Synthesis of Alloy Ti-6A1-4V with Low Residual Porosity by a Powder Metallurgy Method", Powder Metallurgy and Metal Ceramics, 2002, vol. 41, no. 7-8, pp. 382-390.
23. W.H. Kao, D. Eylon, C.F. Yolton and F.H. Froes, "Effect of Temporary Alloying by Hydrogen (Hydrovac) on the Vacuum Hot Pressing and Microstructure of Titanium Alloy Powder Compacts", Progress in Powder Metallurgy, edited by J.M. Capus and D.L. Dyke, Metal Powder Industries Federation, Princeton, NJ, 1981, vol. 37, pp. 289-302.
24. L. Levin, R.G. Vogt, D. Eylon and F.H. Froes, "Fatigue Resistance Improvement of Ti-6A1-4V by ThermoChemical Treatment", Titanium, Science and Technology, edited by G. Lutjering, U. Zwicker and W. Bunk, Deutsche Gesellschaft für Metallkunde, Oberursel, Germany, 1985, pp. 2,107-2,114.
25. Y. Mahajan, D. Eylon, R. Bacon and F.H. Froes, "Microstructure Property Correlation in Cold Pressed and Sintered Elemental Ti-6A1-4V Powder Compacts", Powder Metallurgy of Titanium Alloys, edited by F.H. Froes and J.E. Smugeresky, The Metall. Soc. of AIME, Warrendale, PA, 1980, pp. 189-202.
26. Y.R. Mahajan, D. Eylon, C.A. Kelto. T. Egerer and F.H. Froes, "Modification of Titanium Powder Metallurgy Alloy Microstructures by Strain Energizing and Rapid OmniDirectional Compaction", Powder Metallurgy Intl., 1985, vol. 17, no. 2, pp. 75-78.
27. V.S. Moxson, V.A. Duz, O. Ivasishin, C. Lavender and V.V. Telin, "Innovative Powder Metallurgy Process for Producing Low Cost Titanium Alloy Components", Titanium 2008-Conference Proceedings (CD-ROM), International Titanium Association (ITA), Broomfield, CO, 2008.
28. G.C. Obasi, O.M. Ferri, T. Ebel and R. Bormann, "Influence of Processing Parameters on Mechanical Properties of Ti-6A1-4V Alloy Fabricated by MIM", Mats. Sci. and Eng. A, 2010, vol. 527, no. 16-17, pp. 3,929-3,935.
29. J. Park, M.W. Toaz, D.H. Ro and E.N. Aqua, "Blended Elemental Powder Metallurgy of Titanium Alloys", Titanium Net Shape Technologies: Proc. of a Symposium, edited by F.H. Froes and D. Eylon, 1984, The Metall. Soc. of AIME, Warrendale, PA, pp. 95-105.
30. R.E. Peebles and C.A. Kelto, "Investigation of Methods for the Production of High Quality, Low Cost Titanium Alloy Powders", Powder Metallurgy of Titanium Alloys, edited by F.H. Froes and J. Smugeresky, TMS-AIME, Warrendale, PA, 1980, pp. 47-58.
31. R.E. Peebles and L.D. Parsons, "Study of Production Methods of Aerospace Quality Titanium Alloy Powder", Titanium Net Shape Technologies: Proc. of a Symposium, edited by F.H. Froes and D. Eylon, 1984, The Metall. Soc. of AIME, Warrendale, PA, pp. 21-28.
32. G. Shibo, Q. Xuanhui, H. Xinbo, Z. Ting and D. Bohua, "Powder Injection Molding of Ti-6A1-4V Alloy", Journal of Materials Processing Technology, 2006, vol. 173, no. 3, pp. 310-314.
33. P.R. Smith, C.M. Cooke and F.H. Froes, "Evaluation of Blended Elemental Ti-6A1-4V Plate in Three Microstructural Conditions", Materials and ProcessContinuing Innovation, 1983, Soc. for the Advancement of Material and Process Engineering, Covina, CA, pp. 406-421.
34. P.R. Smith, C.M. Cooke, A. Patel and F.H. Froes, "Evaluation of Ti-6A1-4V Powder Metallurgy Plate", Progress in Powder Metallurgy, edited by J.G. Bewley and S.W. McGee, Metal Powder Industries Federation, Princton, NJ, 1982, vol. 38, pp. 339-359.
35. R.F. Vaughan and P.A. Blenkinsop, "Metallurgical Assessment of Ti-6A1-4V Powder", Powder Metallurgy of Titanium Alloys, edited by F.H. Froes and J. Smugeresky, TMS-AIME, Warrendale, PA, 1980, pp. 83-92.
36. L. Wang, Z.-b. Lang and H.-p. Shi, "Properties and Forming Process of Prealloyed Powder Metallurgy Ti-6A14V Alloy", Trans. Nonferrous Metals Society of China, The Institution of Engineering and Technology, 2007, pp. 639-643.
37. I. Weiss, D. Eylon, M.W. Toaz and F.H. Froes, "Effect of Isothermal Forging on Microstructure and Fatigue Behavior of Blended Elemental Ti-6A1-4V Powder Compacts", Matall. Trans. A, 1986, vol. 17A, no. 3, pp. 549-559.
38. Y. Yamamoto, J.O. Kiggans, M.B. Clark, S.D. Nunn, A.S. Sabau and W.H. Peter, "Consolidation Process in Near Net Shape Manufacturing of Armstrong CP-Ti/Ti-6A1-4V", Powders, Key Engineering Materials, 2010, vol. 436, pp. 103-111.
39. C.F. Yolton, D. Eylon and F.H. Froes, "Evaluation of Blended Elemental Ti-6A1-4V Plate in Three Microstructural Conditions", Sixth World Conference on Titanium, Vol. III, edited by P. Lacombe, R. Tricot and G. Beranger, Les Editions de Physique, Les Ulis Cedex, France, 1989, pp. 1,641-1,646.
40. K. Zhang, J. Mei, N. Wain and X. Wu, "Effect of HotIsostatic- Pressing Parameters on the Microstructure and Properties of Powder Ti-6A1-4V Hot-Isostatically-Pressed Samples", Metall and Mats. Trans. A, 2010, vol. 41, no. 4, pp. 1,033-1,045.
41. D. Bozic, D. Sekulic, J. Stasic, V. Rajkovic and M.T. Jovanovic, "The Influence of Microstructural Characteristics and Contaminants on the Mechanical Properties and Fracture Topography of Low Cost Ti6A14V Alloy", Intl. J. of Materials Research, 2008, vol. 99 (Compendex), pp. 1,268-1,274.
42. G. Welsch, Y-T. Lee, P.C. Eloff, D. Eylon and F.H. Froes, "Deformation Behavior of Blended Elemental Ti-6A1-4V Compacts", Metall. Trans. A, 1983, vol. 14A, no. 4, pp. 761-769.
43. P.J. Andersen and P.C. Eloff, "Development of Higher Performance Blended Elemental Powder Metallurgy Ti Alloys", Powder Metallurgy of Titanium Alloys, edited by F.H. Froes and J.E. Smugeresky, The Metall. Soc. of AIME, Warrendale, PA. 1980, pp. 175-187.
44. R.R. Boyer, J.E. Magnuson and J.W. Tripp, "Characterization of Pressed and Sintered Ti-6A1-4V Powders", Powder Metallurgy of Titanium Alloys ibid., pp. 203-216.
45. V.A. Duz, V.S. Moxson, F.H. Froes, F. Sun and J.S. Montgomery, "Powder Metallurgy Ti-6A1-4V Components Produced from Low Cost Blended Elemental Powder by Hot Pressing", Cost-Affordable Titanium, edited by F.H. Froes, M.A. Imam and D. Fray, TMS, Warrendale, PA, 2004, pp. 145-150.
46. D. Eylon, R.G. Vogt, and F.H. Froes, "Property Improvement of Low Chlorine Titanium Alloy Blended Elemental Powder Compacts by Microstructure Modification", Progress in Powder Metallurgy, edited by E.A. Carlson and G. Gaines, Metal Powder Industries Federation, Princeton, NJ, 1986, vol. 42, pp. 625-634.
47. F.H. Froes, "Developments in Titanium Powder Metallurgy", JOM, 1980, vol. 32, no. 2, pp. 47-54.
48. Powder Metallurgy of Titanium Alloys, edited by F.H. Froes and J.E. Smugeresky, The Metall. Soc. of AIME, Warrendale, PA, 1980.
49. Titanium Net Shape Technologies, edited by F.H. Froes and D. Eylon, The Metall. Soc. of AIME, Warrendale, PA, 1984.
50. B. Liu, Y. Liu, X-y. He, H-p. Tang and L-f. Chen, "Low Cycle Fatigue Improvement of Powder Metallurgy Titanium Alloy Through Thermomechanical Treatment", Transactions of the Nonferrous Metals Society of China, 2008, vol. 18, no. 2, pp. 227-232.
51. D. Eylon and F.H. Froes, Tensile and Fatigue Strength Improvement of Titanium PM Alloys Through Microstructural Refinement", Strength of Metals and Alloys (ICSMA-8), edited by P.O. Kettunen, T.K. Lepistö and M.E. Lehtonen, Pergamon, Oxford, UK, 1988, pp. 527-533.
52. I.M. Robertson and G.B. Schaffer, "Review of Densification of Titanium Based Powder Systems in Press and Sinter Rrocessing", Powder Metallurgy, 2010, vol. 53, no. 2, pp. 146-162.
53. J. Park, M.W. Toaz, D.H. Ro and E.N. Aqua, "Blended Elemental Powder Metallurgy of Titanium Alloys", Titanium Net Shape Technologies: Proc. of a Symposium, edited by F.H. Froes and D. Eylon, 1984, The Metall. Soc. of AIME, Warrendale, PA, pp. 95-105.
54. B.S. Becker, and J.D. Bolton, "Corrosion Behaviour and Mechanical Properties of Functionally Gradient Materials Developed for Possible Hard-Tissue Applications", Journal of Materials Science: Materials in Medicine, 1997, vol. 8, no. 12, pp. 793-797.
55. H. Conrad, "Effect of Interstitial Solutes on the Strength and Ductility of Titanium", Progress in Materials Science, 1981, vol. 26, no. 2, pp. 123-403.
56. O.M. Ivasishin, "Cost-Effective Manufacturing of Titanium Parts with Powder Metallurgy Approach", Materials Forum, 2005, vol. 29, pp. 1-8.
57. C. McCracken,"Production of Fine Titanium Powders via the Hydride-Dehydride (HDH) Process", PIM International 2008, vol. 2, no. 2, pp. 55-57.
58. Y.Liu, L. Chen, W. Wei, H. Tang, B. Liu and B. Huang, "Improvement of Ductility of Powder Metallurgy Titanium Alloys by Addition of Rare Earth Element", J. Materials Science and Technology, 2006, vol. 22, no. 4, pp. 465-469.
59. Y. Liu, L.F. Chen, H.P. Tang, C.T. Liu, B. Liu and B.Y. Huang, "Design of Powder Metallurgy Titanium Alloys and Composites", Mats. Sc. and Eng. A, 2006, vol. 418, no. 1-2, pp. 25-35.
60. G. Crowley, "How to Extract Low-Cost Titanium", Advanced Materials & Processes, 2003, vol. 161, no. 11, pp. 25-27.
61. C.G. McCracken, J.W.J. Robison and C.A. Motchenbacher, "Manufacture of HDH Low-Oxygen Titanium-6A1uminium-4Vanadium (Ti-6-4) Powder Incorporating a Novel Powder De-Oxidation Step", Advances in Powder Metallurgy Ss Particulate Materials-2009, compiled by T.J. Jesberger and S.J. Mashl, Metal Powder Industries Federation, Princeton, NJ, 2009, vol. 1, part 7, pp. 146-152.
62. G. Lutjering and J.C. Williams, Titanium, Second Edition, 2007, Springer, New York, NY.
63. J.J. Lucas and P.P. Konieczny, "Relationship Between Alpha Grain Size and Crack Initiation Fatigue Strength in Ti-6A1-4V", Metall. and Mats. Trans. B, 1971, vol. 2, no. 3, pp. 911-912.
64. D. Eylon and C.M. Pierce, "Effect of Nicrostructure on Notch Fatigue Properties of Ti-6A1-4V", Metall. and Mats. Trans. A, 1976, vol. 7, no. 1, pp. 111-121.
65. J.H. Kim, S.L. Semiatin and C.S. Lee, "Constitutive Analysis of the High-Temperature Deformation of Ti-6A14V with a Transformed Microstructure" , Acta Materialia, 2003, vol. 51, no. 18, pp. 5,613-5,626.
66. S.L. Semiatin and T.R. Bieler, "The Effect of Alpha Platelet Thickness on Plastic Flow During Hot Working of Ti-6A14V with a Transformed Microstructure", Acta Materialia, 2001, vol. 49, no. 17, pp. 3,565-3,573.
67. P.C. Eloff, M.R. Dustoor and V.S. Moxson, "Properties of P/M titanium Alloy Produced from Elemental Blends-The Current State of Development", Progress in Powder Metallurgy, edited by J.M. Capus and D.L. Dyke, Metal Powder Industries Federation, Princeton, NJ, 1982, vol. 37, pp. 267-277.
68. D.P. DeLo, R.E. Dutton, S.L. Semiatin and H.R. Piehler, "Modeling of Hot Isostatic Pressing and Hot Triaxial Compaction of Ti-6 A1-4 V Powder", Acta Materialia, 1999, vol. 47, no.11, pp. 3,159-3,167.
69. D.P. Delo and H.R. Piehler, "Early Stage Consolidation Mechanisms During Hot Isostatic Pressing of Ti-6 Al-4 V Powder Compacts", Acta Materialia, 1999, vol. 47, no. 9, pp. 2,841-2,852.
70. A. Gogia, D. Banerjee and N.C. Birla, "Effect of Thermomechanical History on the Microstructure of a+β Titanium Alloys", Trans. Indian Inst, of Metals, 1983, vol. 36, no. 3, pp. 200-207.
71. H. Margolin and P. Cohen, "Kinetics of Recrystallization of Alpha in Ti-6A1-4V", Titanium'80, Science and Technology, Proc. of the Fourth International Conference on Titanium, edited by H. Kimura and O. Izumi, 1980, pp. 2,991-2,997.
72. I. Weiss, F.H. Froes, D. Eylon and G.E. Welsch, "Modification of Alpha Morphology in Ti-6 A1-4V by Thermomechanical Processing", Metall. Trans. A, 1986, vol. 17, pp. 1,935-1,947.
73. I. Weiss, G.E. Welsch, F.H. Froes and D. Eylon, "Mechanisms of Microstructure Refinement in Ti-6A1-4V", Titanium: Science and Technology, edited by G. Lütjering, U. Zwicker and W. Bunk, Deutsche Gesellschaft für Metallkunde, Oberursel, Germany, 1985, pp. 1,503-1,510.
74. I. Weiss, G.E. Welsch, F. H. Froes and D. Eylon, "Recovery, Recrystallization and Mechanical Properties in Ti-6 A1-4V Alloy", Strength of Metals and Alloys (ICSMA 7), edited by H.J. McQueen, J.-P. Bailon, J.I. Dickson, J.J. Jonas and M.G. Akben, Pergamon Press, Oxford, UK, 1985, vol. 2, pp. 1,073-1,078.
75. D. Eylon, P.R. Smith, S.W. Schwenker and F.H. Froes, "Status of Titanium Powder Metallurgy", Industrial Applications of Titanium and Zirconium, edited by R.T. Webster, CS. Young, ASTM International, Philadelphia, PA, 1984, pp. 48-65.
76. I. Weiss, F.H. Froes, D. Eylon and C.C. Chen, "Control of Microstructure and Properties of Ti-6A1-2Sn-4Zr-6Mo Powder Forgings", Titanium Net Shape Technologies, edited by F.H. Froes and D. Eylon, The Metall. Soc. of AIME, Warrendale, PA, 1984, pp. 79-94.
77. Y.R. Mahajan, D. Eylon, and C. Kelto, "Evaluation of Ti10V-2Fe-3A1 Powder Compacts Produced by the ROC Method", Progress in Powder Metallurgy, edited by H.I. Sanderow, W.L. Giebelhausen and K.M. Kulkarni, Metal Powder Industries Federation, Princeton, NJ, 1985, vol. 41, pp. 163-171.
78. F.H. Froes, D. Eylon, G. Wirth, K.J. Grundhoff and W. Smarsly, "Fatigue Properties of Hot Isostatically Pressed Ti-6A1-4V Powders", Met. Powder Rep., 1983, vol. 38, no. 1, pp. 36-49.
79. O.N. Senkov, J.J. Jonas and F.H. Froes, "Recent Advances in the Thermohydrogen Processing of Titanium Alloys", JOM, 1996, vol. 48, no. 77, pp. 42-47.
80. T.Y. Fang, and W.H. Wang, "Microstructural Features of Thermochemical Processing in a Ti-6A1-4V Alloy", Materials Chemistry and Physics, 1998, vol. 56, no. 1, pp. 35-47.
81. A. Guitar, G.. Vigna, and M.I. Luppo, "Microstructure and Tensile Properties After Thermohydrogen Processing of Ti6A1-4V", Journal of the Mechanical Behavior of Biomedical Materials, 2009, vol. 2, no. 2, pp. 156-163.
82. F.H. Froes, O.N. Senkov, and J.I. Qazi, "Hydrogen as a Temporary Alloying Element in Titanium Alloys: Thermohydrogen Processing", International Materials Reviews, 2004. vol. 49, pp. 227-245.
83. O.N. Senkov and F.H. Froes, Thermohydrogen Processing of Titanium Alloys", Int. J. of Hydrogen Energy, 1999, vol. 24, no. 6, pp. 565-576.
84. E. W. Collings, The Physical Metallurgy of Titanium Alloys, 1984, American Society for Metals, Metals Park, OH.
85. I. Weiss and S.L. Semiatin, "Thermomechanical Processing of Beta Titanium Alloys-an Overview", Mats. Sci. and Eng. A, 1998, vol. 243, no. 1-2, pp. 46-65.
86. I. Weiss and S.L. Semiatin, "Thermomechanical Processing of Alpha Titanium Alloys-an Overview", Mats. Sci. and Eng. A, 1999, vol. 263, no. 2, pp. 243-256.
87. E.H. Kraft, Summary of Emerging Titanium Cost Reduction Technologies, A Study by the United States Dept. of Energy (DOE) and Oak Ridge National Laboratory (ORNL), 2003.
88. D. Eylon, W.A. Ernst and D.P. Kramer, "Development of Ultra-Fine Microstructure in Titanium via Powder Metallurgy for Improved Ductility and Strength", Materials Science Forum, edited by M. Cabibbo and S. Spigarelli, Trans Tech Publications Ltd., Switzerland, 2009, vol. 604-605, pp. 223-228.
89. T. Ebel, "Titanium and Titanium Alloys for Medical Applications: Opportunities and Challenges", PIM International 2008, vol. 2, no. 2, pp. 21-30.
90. R.M. German, Titanium Powder Injection Moulding (TiPIM): A Review of the Current Status of Materials, Processing, Properties and Applications", PIM International, 2009, vol. 3, no. 4, pp. 21-37.
91. F.H. Froes and R.M. German, "Cost Reductions Prime Ti PIM for Growth", Metall Powder Report, 2000, vol. 55, no. 6, pp. 12-14.
92. R.M. German, "R&D in Support of Powder Injection Molding: Status and Projections", Int. J. Powder Metall., 2007, vol. 43, no. 6, pp. 47-57.
93. R.M. German and A. Bose, Injection Molding of Metals and Ceramics, 1997, Metal Powder Industries Federation, Princeton, NJ.
94. F.H. Froes, "Developments in Titanium P/M", Metal Powder Report, in press.
95. C.F. Yolton and F.H. Froes, "Method for Producing Powder Metallurgy Articles", U.S. Patent No. 4,219,357, August 26, 1980.
96. O.M. Ivasishin, D.G. Sawakin, V.S. Moxson, K.A. Bondareval and F.H. Froes, Titanium Powder Metallurgy for Automotive Components", Materials Technology, 2002, vol. 17, no. 1, pp. 20-25.
97. O.M. Ivasishin, V.M. Anokhin, A.N. Demidik and D.F. Sawakin, "Cost-Effective Blended Elemental Powder Metallurgy of Titanium Alloys for Transportation Application", Key Engineering Materials, edited by F.H. Froes and E. Evangelista, Trans Tech Publications. Switzerland, 2000, vol. 188, pp. 55-62.
98. O.M. Ivasishin, D.G. Sawakin, V.S. Moxson, V.A. Duz, F.H. Froes and R. Davies, "Low-Cost PM Titanium Materials for Automotive Applications", JOM, 2004, vol. 56, no. 11, p. 270.
99. 2", Key Engineering Materials, edited by M. Ashraf Imam, F. H. Froes and K.F. Dring, Trans Tech Publications, Switzerland, 2010, vol. 436, pp. 157-163.
100. I.M. Robertson and G.B. Schaffer, "Comparison of Sintering of Titanium and Titanium Hydride Powders", Powder Metallurgy, 2010, vol. 53, no. 1, pp. 12-19.
101. O.M. Ivasishin, K.A. Bondareva, V.I. Bondarchuk, O.N. Gerasimchuk, D.G. Savvakin and B.A. Gryaznov, "Fatigue Resistance of Powder Metallurgy Ti-6A1-4V Alloy", Strength of Materials, 2004, vol. 35, no. 3, pp. 225-230.
102. G.G. Yapicia, I. Karamana, Z.P. Luob and H. Rack, "Microstructure and Mechanical Properties of Severely Deformed Powder Processed Ti-6A1-4V Using Equal Channel Angular Extrusion", Scripta Materialia, 2003, vol. 49, no. 10, pp. 1,021-1,027.
103. H. Fujiwara, M. Nakatani, T. Yoshida, Z. Zhang and K. Ameyama, "Outstanding Mechanical Properties in Materials with a Nano/Meso Hybrid Microstructure", Materials Science Forum, edited by Y. Estrin and H.J. Maier, The Institution of Engineering and Technology, Trans Tech Publications, Switzerland, 2008, vol. 584-586, pp. 55-60.
104. T. Sekiguchi, K. Ono, H. Fujiwara and K. Ameyama, "New Microstructure Design for Commercially Pure Titanium with Outstanding Mechanical Properties by Mechanical Milling and Hot Roll Sintering", Mats. Trans., 2010, vol. 51, no. 1, pp. 39-45.