Cost reductions prime Ti PIM for growth

Metal Powder Report

Volumn 55, Issue 6, 2000, Pages

  Froes, F H ^a   German, Randall M ^b  

^a UNIVERSITY OF IDAHO   (United States)

^b PENNSYLVANIA STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COST EFFECTIVENESS; INJECTION MOLDING; METAL MOLDING; TITANIUM ALLOYS;

POWDER INJECTION MOLDING (PIM);

TITANIUM POWDER METALLURGY;

EID: 0034207464     PISSN: 00260657     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (68)

1. Congress of the U.S. Office of Technology Asessment, Advanced Materials by Design, (June 1988).
2. Materials Science and Engineering - Forging Stronger Links to Users, (1999), NMAB, National Academy Press publication NMAB-492, Washington DC.
3. F.H. Froes, D. Eylon, and H. Bomberger eds, Titanium Technology: Present Status and Future Trends, TDA, Dayton, OH, (1985).
4. Francis H. (Sam) Froes, Te-Lin Yau and Hans G. Weidenger, 'Titanium, Zirconium and Hafnium', chapter 8, Materials Science and Technology - Structure and Properties of Nonferrous Alloys, vol. ed. K.H. Matucha, (1996), VCH Weinheim, p. 401.
5. F.H. (Sam) Froes, 'Titanium', chapters 3.3.5a -3.3.5e Encyclopedia of Materials Science and Engineering, P. Bridenbaugh, subject editor, Elsevier, to be published 2000.
6. F.H. (Sam) Froes, 'Titanium alloys', Handbook of Advanced Materials, Ed. in Chief James K. Weasel, McGraw-Hill Inc, New York, Chapter 8, to be published 2000.
7. F.H. (Sam) Froes, 'Titanium metal alloys', Handbook of Chemical Industry Economics, Inorganic, Ed. in Chief Jeff Ellis, John Wiley and Sons Inc, New York, to be published 2000.
8. R.R. Boyer, G. Welsch and E.W. Collings, Eds, Materials Properties Handbook: Titanium Alloys, (1994), ASM Int., Materials Park, OH.
9. F.H. Froes and D. Eylon, Int. Mater. Review, Vol. 35, (1990), No. 3, p. 162.
10. F.H. Froes and C. Suryanarayana, Reviews in Particulate Materials, Eds. A. Bose, R.M. German and A. Lawley, MPIF, Princeton, NJ, vol. 1, (1993), p. 223.
11. I.J. Polmear, Light Alloys, Metallurgy of the Light Metals, Edward Arnold/ASM Int. Materials Park, OH, (1981 and 1989).
12. S.S. Joseph and F.H. Froes, Light Metal Age, Vol. 46, (1988), Nos. 11 and 12, p. 5.
13. H.A. Lipsitt, High Temperature Ordered Intermetallic Alloys, Vol. 39, eds C.C. Koch et al., MRS, Pittsburgh, PA, (1985), p. 351.
14. Th Edition, (1990), p. 913.
15. F.H. Froes, C. Suryanarayana, and D. Eliezer, ISIJ Int., Vol. 36, (1991), p. 1235.
16. F.H. Froes, C. Suryanarayana and D. Eliezer, J. Mater. Sci., Vol. 27, (1992), p. 5113.
17. Y-W. Kim, Gamma Titanium Aluminides, Y-W. Kim, R. Wagner, and M. Yamaguchi, eds, TMS, Warrendale, PA, (1995), p.637.
18. F.H. Froes, Light Metals Age, Vol. 58, (April 2000), nos. 3&4, p. 76.
19. F.H. Froes, JOM, Vol. 51, No. 6, (1999), p. 13.
20. F.H. Froes, JOM, Vol. 52, No. 5, (2000), p. 12.
21. F.H. Froes, American Metal Market Titanium Supplement, Oct. 20, (1999), p. 10A.
22. F.H. Froes, P.G. Allen and M. Niiomi eds, Non-Aerospace Applications of Titanium, (1998), TMS, Warrendale, PA.
23. nd Edition, (1994), MPIF, Princeton, NJ, Chapter Six, p. 192.
24. P.J. Vervoort, R. Vetter and J. Duszczyk, Advanced Performance Materials, vol. 3, (1996), p. 121.
25. Y. Kaneko, et al., J. Jpn Soc. Powder Powder Metall., vol 35, (1988), p. 646.
26. K. Ameyama et al., Advances in Powder Metallurgy, vol. 3, MPIF, Princeton, NJ, (1989), p. 121.
27. Y. Kaneko, K. Ameyama, S. Sakaguchi, J. Jpn Soc. Powder Powder Metall., vol. 37, (1990), no. 4, p. 13.
28. M. A. Ciomek, US Patent 5,064,463, (1991).
29. K. Kato, Y. Nozaki, A. Matsumoto, J. Jpn Soc. Powder Powder Metall., vol. 39, (1992), p. 875.
30. H. Kyogoku, T. Toda, K. Shinohara, J. Jpn Soc. Powder Powder Metall., vol. 40, (1993), p. 439.
31. J. Takekawa, J. Jpn Soc. Powder Powder Metall., vol. 41, (1994), p. 244.
32. Y. Osafume et al., J. Jpn Soc. Powder Powder Metall., vol 41, (1994), p. 506.
33. H. Kyogoku, et al., J. Jpn Soc. Powder Powder Metall., vol 41, (1994), p. 1075.
34. R.M. German, Report on progress with titanium injection molding, Presented at the APPIM Spring Meeting, April 1994, The Pennsylvania State University, University Park, PA.
35. K. Kusaka, et al., J. Jpn Soc. Powder Powder Metall., vol 42, (1995), p. 383.
36. H. Kyogoku, et al., J. Jpn Soc. Powder Powder Metall., vol 42, (1995), p. 1052.
37. T. Gladden, US Patent 5,441,695, (1995).
38. K. Kato, et al., J. Jpn Soc. Powder Powder Metall., vol 42, (1995), p. 1068.
39. S. Takahashi, S. Kubota, K. Shimodaira, First Japan-Korea Workshop on PIM, S. Ahn and N. J. Kim (eds.), Research Institute of Industrial Science and Technology, Pohang, Kyungbuk, Korea, (1997), p. 59.
40. R.M. German and R.G. Iacocca, Powder Metallurgy Processing, Physical Metallurgy and Processing of Intermetallic Compounds, N.S. Stoloff and V.K. Sikka (eds.), Chapman and Hall, New York, (1996), p. 605.
41. K. Kusaka, et al., Advances in Powder Metallurgy and Particulate Materials, MPIF, Princeton, NJ, (1996), p. 19-27.
42. A. Griffo, Material capabilities in PIM, APPIM Consortium Meeting, Penn State, University Park, PA, 10 April 1996.
43. H. Wohlfromm et al., Proceedings of the First European Symposium on Powder Injection Moulding, European Powder Metallurgy Association, Shrewsbury, UK, (1997), p. 54.
44. T. Kono, A. Horata, T. Kondo, J. Jpn Soc. Powder Powder Metall., vol 44, (1997), p. 985.
45. K. Kato, A. Matsumoto, T. Ieki, J. Jpn Soc. Powder Powder Metall., vol 44, (1997), p. 1029.
46. T. Ieki, et al., J. Jpn Soc. Powder Powder Metall., vol 44, (1997), p. 448.
47. A. Matsumoto, K. Katoh, K. Andoh, J. Jpn Soc. Powder Powder Metall., vol 44, (1997), p. 1037.
48. R.M. German, H.D. Kunze (ed.), DGM Informations Gesellschaft, Frankfurt, Germany, (1997), p. 211.
49. R.M. German, 'Novel powder metallurgy techniques for refractory metals and hard materials', Proceedings of the Fourteenth Plansee Seminar, vol 1, G. Kneringer, P. Rodhammer and P. Wilhartitz (eds.), Plansee AG, (1997), p. 194.
50. I.R. Van Gestel, 'A new production method for high value parts', Powder Injection Molding Technologies, R.M. German, H. Wiesner, and R.G. Cornwall (eds.), Innovative Material Solutions, State College, PA, (1998), p. 33-42.
51. Y. Kim, N.J. Kim, T. Yoon, S. Ahn, Proceedings 1998 PM World Congress, Granada Spain, published on CD by the EPMA, Shrewsbury, UK, December 1998.
52. H. Wohlfromm, M. Blomacher and D. Weinand, Powder Injection Molding Technologies, R. M. German, H. Wiesner, and R. G. Cornwall (eds.), Innovative Material Solutions, State College, PA, (1998), p. 339.
53. H. Miura, et al., J. Jpn Soc. Powder Powder Metall., vol 45, (1998), p. 892.
54. H. Eifert, T. Hartwig, Advances in Powder Metallurgy and Particulate Materials, MPIF, Princeton, NJ, (1998), p. 5.143.
55. R.M. German, Processing and Fabrication of Advanced Materials IV, vol. 2, A. Khor, T. S. Srivatsan, and J. J. Moore (eds.), Institute of Materials, London, UK, (1998), p. 1363.
56. S. Ito, et al., Processing and Fabrication of Advanced Materials IV, vol. 2, A. Khor, T.S. Srivatsan, and J.J. Moore (eds), Institute of Materials, London, UK, (1998), p. 1433.
57. K. Maekawa, M. Takita, H. Nomura, J. Jpn Soc. Powder Powder Metall., vol 46, (1999), p. 1053.
58. M. Gaydos, S. A. Miller, W. T. Nachtrab, Advances in Powder Metallurgy and Particulate Materials, vol 1, MPIF, Princeton, NJ, (1999), p. 3.189.
59. J. Takekawa, N. Sakurai, J. Jpn Soc. Powder Powder Metall., vol 46, (1999), p. 877.
60. H. Wang, S. H. J. Lo, J. R. Barry, P/M Sci. Tech. Briefs, vol 1, (1999), no. 5, p. 16.
61. Y. Kim, et al., J. Jpn Soc. Powder Powder Metall., vol 46, (1999), p. 882.
62. R.J. Petcavich, X. Yang, L. Mao, 1999 Powder Injection Molding Symposium, Nittany Lion Inn, The Pennsylvania State University, University Park, PA, 28 April 1999.
63. H. Nakamura, T. Shimura, K. Nakabayashi, J. Jpn Soc. Powder Powder Metall., vol 46, (1999), p. 870.
64. K. Kato, J. Jpn Soc. Powder Powder Metall., vol 46, (1999), p. 865.
65. J. LaSalle, 1999 Powder Injection Molding Symposium, The Pennsylvania State University, 28 April 1999.
66. D.C. Krueger, 1999 Powder Injection Molding Symposium, The Pennsylvania State University, 28 April 1999.
67. K.H. Scholvalvi, 'APEX PM binders', International Conference on the Powder Injection Molding of Metals, Ceramics, and Cemented Carbides, The Pennsylvania State University, University Park, PA, March 2000.
68. H. Shiraishi, E. Fukasawa, K. Fujisawa and H. Tajima, J. Jpn Soc. Titanium, vol 2, (1997), p. 1.