Bond strength of resin cement to yttrium-stabilized tetragonal zirconia ceramic treated with air abrasion, silica coating, and laser irradiation

Photomedicine and Laser Surgery

Volumn 28, Issue 6, 2010, Pages 801-808

  Akyil, Musa Şamil ^a   Uzun, Ismail Hakki ^b   Bayindir, Funda ^a  

^a ATATÜRK UNIVERSITY   (Turkey)

^b INONU UNIVERSITY   (Turkey)

Author keywords

[No Author keywords available]

Indexed keywords

ADHESIVE BONDING; AIR ABRASION; BOND STRENGTH; CO-GROUP; COMPOSITE CYLINDERS; ER: YAG; ER:YAG LASERS; LASER IRRADIATIONS; ND : YAG LASERS; ND: YAG LASER IRRADIATION; RESIN CEMENT; SHEAR BOND STRENGTH TESTS; SHEAR BOND STRENGTHS; SILICA COATINGS; TEST RESULTS; TETRAGONAL ZIRCONIA; TETRAGONAL ZIRCONIA CERAMICS; THERMOCYCLING; TREATMENT METHODS;

ABRASION; BOND STRENGTH (MATERIALS); CEMENTS; CERAMIC MATERIALS; COATINGS; CYLINDERS (SHAPES); ERBIUM; IRRADIATION; NEODYMIUM; RESINS; SCANNING ELECTRON MICROSCOPY; SHEAR STRENGTH; SILICA; SURFACE TREATMENT; TRIBOLOGY; YTTRIUM; YTTRIUM ALLOYS; ZIRCONIA;

NEODYMIUM LASERS;

RESIN CEMENT; SILICON DIOXIDE; ZIRCONIUM;

ARTICLE; CHEMISTRY; DENTAL BONDING; DENTAL CARE; DENTAL SURGERY; HUMAN; MATERIALS TESTING; SCANNING ELECTRON MICROSCOPY;

AIR ABRASION, DENTAL; DENTAL BONDING; DENTAL STRESS ANALYSIS; HUMANS; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING; RESIN CEMENTS; SILICON DIOXIDE; ZIRCONIUM;

EID: 78650081805     PISSN: 15495418     EISSN: None     Source Type: Journal    
DOI: 10.1089/pho.2009.2697     Document Type: Article

References (39)

1. Christel, P., Meunier, A., Heller, M., Torre, J. P., and Peille, C. N. (1989). Mechanical properties and short-term in-vivo evaluation of yttrium-oxide-partially-stabilized zirconia. J. Biomed. Mater. Res. 23, 45-61.
2. Blatz, M. B. (2002). Long-term clinical success of all-ceramic posterior restorations. Quintessence Int. 33, 415-426.
3. Tinschert, J., Natt, G., Mautsch, W., Augthun, M., and Spiekermann, H. (2001). Fracture resistance of lithium disilicate-, alumina-, and zirconia-based three-unit fixed partial dentures: a laboratory study. Int. J. Prosthodont. 14, 231-238.
4. Aboushelib, M. N., Kleverlaan, C. J., and Feilzer, A. J. (2006). Microtensile bond strength of different components of core veneered all-ceramic restorations. Part II: zirconia veneering ceramics. Dent. Mater. 22, 857-863.
5. Piconi, C., and Maccauro, G. (1999). Zirconia as a ceramic biomaterial. Biomaterials 20, 1-25.
6. Akova, T., Yoldas, O., Toroglu, M. S., and Uysal, H. (2005). Porcelain surface treatment by laser for bracket-porcelain bonding. Am. J. Orthod. Dentofacial Orthop. 128, 630-637.
7. Shiu, P., De Souza-Zaroni, W. C., Eduardo Cde, P., and Youssef, M. N. (2007). Effect of feldspathic ceramic surface treatments on bond strength to resin cement. Photomed. Laser Surg. 25, 291-296.
8. Guler, A. U., Yilmaz, F., Ural, C., and Guler, E. (2005). Evaluation of 24-hour shear bond strength of resin composite to porcelain according to surface treatment. Int. J. Prosthodont. 18, 156-160.
9. Guler, A. U., Yilmaz, F., Yenisey, M., Guler, E., and Ural, C. (2006). Effect of acid etching time and a self-etching adhesive on the shear bond strength of composite resin to porcelain. J. Adhes. Dent. 8, 21-25.
10. Melo, R. M., Valandro, L. F., and Bottino, M. A. (2007). Microtensile bond strength of a repair composite to leucitereinforced feldspathic ceramic. Braz. Dent. J. 18, 314-319.
11. Derand, P., and Derand, T. (2000). Bond strength of luting cements to zirconium oxide ceramics. Int. J. Prosthodont. 13, 131-135.
12. Ozcan, M., and Vallittu, P. K. (2003). Effect of surface conditioning methods on the bond strength of luting cement to ceramics. Dent. Mater. 19, 725-731.
13. Yoshida, K., Yamashita, M., and Atsuta, M. (2004). Zirconate coupling agent for bonding resin luting cement to pure zirconium. Am. J. Dent. 17, 249-252.
14. Amaral, R., Ozcan, M., Bottino, M. A., and Valandro, L. F. (2006). Microtensile bond strength of a resin cement to glass infiltrated zirconia-reinforced ceramic: the effect of surface conditioning. Dent. Mater. 22, 283-290. (Pubitemid 43199618)
15. Atsu, S. S., Kilicarslan, M. A., Kucukesmen, H. C., and Aka, P. S. (2006). Effect of zirconium-oxide ceramic surface treatments on the bond strength to adhesive resin. J. Prosthet. Dent. 95, 430-436.
16. Bottino, M. A., Valandro, L. F., Scotti, R., and Buso, L. (2005). Effect of surface treatments on the resin bond to zirconiumbased ceramic. Int. J. Prosthodont. 18, 60-65.
17. Wolfart, M., Lehmann, F., Wolfart, S., and Kern, M. (2007). Durability of the resin bond strength to zirconia ceramic after using different surface conditioning methods. Dent. Mater. 23, 45-50.
18. Kumbuloglu, O., Lassila, L. V., User, A., and Vallittu, P. K. (2006). Bonding of resin composite luting cements to zirconium oxide by two air-particle abrasion methods. Oper. Dent. 31, 248-255.
19. Kern, M., and Wegner, S. M. (1998). Bonding to zirconia ceramic: adhesion methods and their durability. Dent. Mater. 14, 64-71.
20. Sun, R., Suansuwan, N., Kilpatrick, N., and Swain, M. (2000). Characterisation of tribochemically assisted bonding of composite resin to porcelain and metal. J. Dent. 28, 441-445.
21. Ernst, C. P., Cohnen, U., Stender, E., and Willershausen, B. (2005). In vitro retentive strength of zirconium oxide ceramic crowns using different luting agents. J. Prosthet. Dent. 93, 551-558.
22. Gokce, B., Ozpinar, B., Dundar, M., Comlekoglu, E., Sen, B. H., and Gungor, M. A. (2007). Bond strengths of allceramics: acid vs laser etching. Oper. Dent. 32, 173-178.
23. Li, R., Ren, Y., and Han, J. (2000). Effects of pulsed Nd:YAG laser irradiation on shear bond strength of composite resin bonded to porcelain. Hua. Xi. Kou. Qiang. Yi. Xue. Za. Zhi. 18, 377-379.
24. Cavalcanti, A. N., Foxton, R. M., Watson, T. F., Oliveira, M. T., Giannini, M., and Marchi, G. M. (2009). Bond strength of resin cements to a zirconia ceramic with different surface treatments. Oper. Dent. 34, 280-287.
25. Cavalcanti, A. N., Pilecki, P., Foxton, R. M., et al. (2009). Evaluation of the surface roughness and morphologic features of Y-TZP ceramics after different surface treatments. Photomed. Laser Surg. 27, 1-7.
26. da Silveira, B. L., Paglia, A., Burnett, L. H., Shinkai, R. S., Eduardo Cde, P., and Spohr, A. M. (2005). Micro-tensile bond strength between a resin cement and an aluminous ceramic treated with Nd:YAG laser, Rocatec System, or aluminum oxide sandblasting. Photomed. Laser Surg. 23, 543-548.
27. Spohr, A. M., Borges, G. A., Junior, L. H., Mota, E. G., and Oshima, H. M. (2008). Surface modification of In-Ceram Zirconia ceramic by Nd:YAG laser, Rocatec system, or aluminum oxide sandblasting and its bond strength to a resin cement. Photomed. Laser Surg. 26, 203-208.
28. Strauss, R. A. (2000). Lasers in oral and maxillofacial surgery. Dent. Clin. North Am. 44, 851-873.
29. Minamizato, T. (1990). Slip-cast zirconia dental roots with tunnels drilled by laser process. J. Prosthet. Dent. 63, 677-684.
30. Stübinger, S., Homann, F., Etter, C., Miskiewicz, M., Wieland, M., and Sader, R. (2008). Effect of Er:YAG, CO (2) and diode laser irradiation on surface properties of zirconia endosseous dental implants. Lasers Surg. Med. 40, 223-228.
31. Phark, J. H., Duarte, S., Jr., Blatz, M., and Sadan, A. (2009). An in vitro evaluation of the long-term resin bond to a new densely sintered high-purity zirconium-oxide ceramic surface. J. Prosthet. Dent. 101, 29-38.
32. Blatz, M. B., Sadan, A., Arch, G. H., Jr., and Lang, B. R. (2003). In vitro evaluation of long-term bonding of Procera All-Ceram alumina restorations with a modified resin luting agent. J. Prosthet. Dent. 89, 381-387.
33. Nishigawa, G., Maruo, Y., Irie, M., et al. (2008). Ultrasonic cleaning of silica-coated zirconia influences bond strength between zirconia and resin luting material. Dent. Mater. J. 27, 842-848.
34. Oyague, R. C., Monticelli, F., Toledano, M., Osorio, E., Ferrari, M., and Osorio, R. (2009). Effect of water aging on microtensile bond strength of dual-cured resin cements to pre-treated sintered zirconium-oxide ceramics. Dent. Mater. 25, 392-399.
35. International Organization for Standardization. (2003). ISO/TS 11405. Dental materials. Testing of adhesion to tooth structure. ISO Publishing, Geneva.
36. de Oyague, R. C., Monticelli, F., Toledano, M., Osorio, E., Ferrari, M., and Osorio, R. (2009). Influence of surface treatments and resin cement selection on bonding to densely-sintered zirconium-oxide ceramic. Dent. Mater. 25, 172-179.
37. Valandro, L. F., Della Bona, A., Antonio Bottino, M., and Neisser, M. P. (2005). The effect of ceramic surface treatment on bonding to densely sintered alumina ceramic. J. Prosthet. Dent. 93, 253-259.
38. Amaral, R., Ozcan, M., Valandro, L. F., Balducci, I., and Bottino, M. A. (2008). Effect of conditioning methods on the microtensile bond strength of phosphate monomer-based cement on zirconia ceramic in dry and aged conditions. J. Biomed. Mater. Res. B. Appl. Biomater. 85, 1-9.
39. Blatz, M. B., Sadan, A., Martin, J., and Lang, B. (2004). In vitro evaluation of shear bond strengths of resin to denselysintered high-purity zirconium-oxide ceramic after longterm storage and thermal cycling. J. Prosthet. Dent. 91, 356-362.