Surface modification of In-Ceram Zirconia ceramic by Nd:YAG laser, Rocatec system, or aluminum oxide sandblasting and its bond strength to a resin cement

Photomedicine and Laser Surgery

Volumn 26, Issue 3, 2008, Pages 203-208

  Spohr, Ana Maria ^a   Borges, Gilberto Antonio ^b   Burnett Jr , Luiz Henrique ^a   Mota, Eduardo Gonçalves ^a   Oshima, Hugo Mitsuo Silva ^a  

^a PONTIFICAL CATHOLIC UNIVERSITY OF RIO GRANDE DO SUL   (Brazil)

^b UNIVERSITY OF UBERABA   (Brazil)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINUM; BOND STRENGTH (MATERIALS); BUILDING MATERIALS; CEMENTS; CERAMIC MATERIALS; LASERS; LIGHT METALS; NEODYMIUM; PHOTOACOUSTIC EFFECT; PULSED LASER DEPOSITION; RESINS; STRENGTH OF MATERIALS; SURFACE TREATMENT; SURFACES;

(1 1 0) SURFACE; ALUMI NUM OXIDE; BOND STRENGTHS; ND : YAG LASERS; RESIN CEMENTS; ROCATEC; SURFACE MODIFICATIONS; ZIRCONIA CERAMICS;

ZIRCONIA;

ALUMINUM OXIDE; RESIN CEMENT;

ABRASIVE BLASTING; ARTICLE; INTERMETHOD COMPARISON; LASER SURGERY; MATERIALS TESTING; MICROTENSILE BOND STRENGTH; NEODYMIUM LASER; NONHUMAN; ROCATEC SYSTEM; SCANNING ELECTRON MICROSCOPE; STATISTICAL SIGNIFICANCE; SURFACE PROPERTY; TENSILE STRENGTH; TOOTH PROSTHESIS;

ALUMINUM OXIDE; DENTAL BONDING; DENTAL PORCELAIN; LASERS, SOLID-STATE; RESIN CEMENTS; SURFACE PROPERTIES;

EID: 46249127045     PISSN: 15495418     EISSN: None     Source Type: Journal    
DOI: 10.1089/pho.2007.2130     Document Type: Article

References (32)

1. Anusavice, K.J. (1996). Philips' Science of Dental Materials, 10th ed. Philadelphia: Saunders, p. 412.
2. McLean, J.W., and Hughes T.H. (1965). The reinforcement of dental porcelain with ceramic oxides. Br. Dent. J. 119, 251-256.
3. McLean, J.W. (1991). The science and art of dental ceramics. Oper. Dent. 16, 149-156.
4. Brecker, S.C. (1965). Porcelain baked to gold - a new medium in prosthodontics. J. Prosthet. Dent. 6, 801-810.
5. Hondrum, S.O. (1992). A review of the strength properties of dental ceramics. J. Prosthet. Dent. 67, 859-864.
6. Borges, G.A., Spohr, A.M., Goes, M.F., Correr Sobrinho, L., and Chan, J.D. (2003). Effect of etching and airborne particle abrasion on the microstructure of different dental ceramics. Prosthet. Dent. 89, 479-487.
7. Kaufmann, K.G., Coelho, D.H., and Colin, L. (1961). Factors influencing the retention of cemented gold castings. J. Prosthet. Dent. 11, 487-502.
8. Fusayama, T., Nakamura, M, Kurosaki, N., and Iwaku, M. (1979). Non-pressure adhesion of a new adhesive restorative resin. J. Dent. Res. 58, 1364-1370.
9. Thurmond, J.W., Barkmeier, W.W., and Wilwerding, T.M. (1994). Effect of porcelain surface treatments on bond strength of composite resin bonded to porcelain. J. Prosthet. Dent. 72, 355-359.
10. Kato, H., Matsumura, H., Tanaka, T., and Atsuta, M. (1996). Bond strength and durability of porcelain bonding systems. J. Prosthet. Dent. 75, 163-168.
11. Kato, H., Matsumura, H., and Atsuta, M. (2000). Effect of etching and sandblasting on bond strength to sintered porcelain of unfilled resin. J. Oral Rehabil. 27, 103-110.
12. Sen, D., Poyrazoglu, E., Tuncelli, B., and Goller, G. (2000). Shear bond strength of resin luting cement to glass-infiltrated porous aluminum oxide cores. J. Prosthet. Dent. 83, 210-215.
13. Paffenbarger, G.C, Sweenwey, W.T., and Bowen, R.L. (1967). Bonding porcelain teeth to acrylic resin denture bases. J. Am. Dent. Assoc. 74, 1018-1023.
14. Newburg, R., and Pameijer, C.H. (1978). Composite resins bonded to porcelain with silane solution. J. Am. Dent. Assoc. 96, 288-291.
15. Ozcan, M., Alkumru, H.N., and Gemalmaz, D. (2001). The effect of surface treatment on the shear bond strength of luting cement to a glass-infiltrated alumina ceramic. Int. J. Prosthodont. 14, 335-339.
16. 3-ceramic In-Ceram. J. Dent. Res. 71, 533 (abstract).
17. Kern, M., and Thompson, V.P. (1994). ESCA surface characterization of the alumina ceramic In-Ceram after various conditioning methods of resin bonding. J. Dent. Res. 73, 197 (abstract).
18. Kern, M., Thompson, V.P. (1994). Sandblasting and silica coating of a glass-infiltrated alumina ceramic: volume loss, morphology, and changes in the surface composition. J. Prosthet. Dent. 71, 453-461.
19. Janda, R., Roulet, J.F., Wulf, M., and Tiller, H.J. (2003). A new adhesive technology of all-ceramics. Dent. Mater. 19, 567-573.
20. Li, R., Ren, Y., and Han, J. (2000). Effects of pulsed Nd:YAG laser irradiation on shear bond strength of composite resin bonded to porcelain. Hua. Xi. Kou. Qiang. Yi. Xue. Za. Zhi. 18, 377-379.
21. Spohr, A.M., Correr Sobrinho, L., Consani, S., Sinhoreti, M.A.C., and Knowles, J.C. (2003). Influence of surface conditions and silane agent on the bond of resin to IPS Empress 2 ceramic. Int. J. Prosthodont. 16, 277-281.
22. Madani, M., Chu, F.C., McDonald, A.V., and Smales, R.J. (2000). Effects of surface treatments on shear bond strengths between a resin cement and an alumina core. J. Prosthet. Dent. 83, 644-647.
23. Kamada, K., Yoshida, M., and Atsuta, M. (1998). Effect of ceramic surface treatments on the bond of four resin luting agents to a ceramic material. J. Prosthet. Dent. 79, 508-513.
24. Awliya, W., Oden, A., Yaman, P., Dennison, J.B., and Razzoog, M.E. (1998). Shear bond strength of a resin cement to densely sintered high-purity alumina with various surface conditions. Acta Odontol. Scand. 56, 9-13.
25. Bailey, J.H. (1989). Porcelain-to-composite bond strengths using four organosilane materials. J. Prosthet. Dent. 61, 174-177.
26. Lu, R., Harcourt, J.K., Tyas, M.J., and Alexander, B. (1992). An investigation of the composite resin/porcelain interface. Aust. Dent. J. 37, 12-19.
27. Rosen, M.R. (1978). From treating solution to filler surface and beyond. J. Coatings Technol. 50, 70-82.
28. Pape, F.W., Pfeiffer, P., and Marx, R. (1991). Haftfestigkeit von geätztem In-Ceram an Zahnschmelz. Z.W.R. 100, 450-453.
29. Jedynakiewicz, M.N., and Martin, N. (2001). The effect of surface on the bond strength of machinable ceramics. Biomaterials 22, 749-752.
30. Kern, M., and Thompson, V.P. (1995). Bonding to glass infiltrated alumina ceramic: adhesive methods and their durability. J. Prosthet. Dent. 73, 240-249.
31. Michida, M.A., Valandro, L.F., Yoshiga, S., Andreatta Filho, O.D., Balducci, I., and Bottino, M.A. (2003). Effect of aluminous ceramic surface treatment on the microtensile bond strength. J. Appl. Oral Sci. 11, 361-366.
32. Silveira, B.L., Paglia, A., Burnett Júnior, L.H., Shinkai, R.S.A., Eduardo, C.P., and Spohr, A.M. (2005). Micro-tensile bond strength between a resin cement and an aluminous ceramic treated with Nd:YAG laser, Rocatec system, or aluminum oxide sandblasting. Photomed. Laser Surg. 23, 543-548.