Microstructure and microtextural studies of friction stir welded aluminium alloy 5052

Materials and Design

Volumn 32, Issue 3, 2011, Pages 1657-1666

  Kumbhar, N T ^a   Sahoo, S K ^b   Samajdar, I ^b   Dey, G K ^a   Bhanumurthy, K ^a  

^a BHABHA ATOMIC RESEARCH CENTRE   (India)

^b INDIAN INSTITUTE OF TECHNOLOGY BOMBAY   (India)

Author keywords

[No Author keywords available]

Indexed keywords

ADVANCING SIDE; ALUMINIUM ALLOYS; BASE MATERIAL; DEFECT-FREE; DISLOCATION STRUCTURES; DUCTILE-MODE; EQUIAXED GRAINS; FRICTION STIR; GRAIN FRAGMENTATION; GRAIN MISORIENTATION; HETEROGENEOUS PLASTICS; MICROSTRUCTURAL DEVELOPMENT; MICROSTRUCTURAL FEATURES; ONION RINGS; RETREATING SIDE; STATIC RECRYSTALLIZATION; THERMAL ACTIVATION;

FRICTION; FRICTION STIR WELDING; MICROSTRUCTURAL EVOLUTION; TEXTURES; TRIBOLOGY; WELDING;

GRAIN REFINEMENT;

EID: 78649815566     PISSN: 02641275     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matdes.2010.10.010     Document Type: Article

References (44)

1. Tylecote R. The solid phase welding of metals 1968, Edward Arnold Ltd.
2. Mathers G. The welding of aluminium and its alloys 2002, Woodhead Publishing Ltd.
3. Dawes C., Thomas W. Friction stir process welds aluminum alloys, the process produces low-distortion, high-quality, low-cost welds on aluminum. Weld J (Miami Fla) 1996, 75(3):41-45.
4. Mishra R., Ma Z. Friction stir welding and processing. Mater Sci Eng R Rep 2005, 50(1-2):1-78.
5. Threadgill P., Leonard A., Shercliff H., Withers P. Friction stir welding of aluminium alloys. Int Mater Rev 2009, 54(2):49-93.
6. Murr L., Liu G., Mcclure J. Dynamic recrystallization in friction-stir welding of aluminium alloy 1100. J Mater Sci Lett 1997, 16(22):1801-1803.
7. McNelley T., Swaminathan S., Su J. Recrystallization mechanisms during friction stir welding/processing of aluminum alloys. Scripta Mater 2008, 58(5):349-354.
8. Yutaka S., Hiroyuki K., Ikeda K., Enomoto M., Jogan S., Hashimoto T. Microtexture in the friction-stir weld of an aluminum alloy. Metall Mater Trans A Phys Metall Mater Sci 2001, 32(4):941-948.
9. Sato Y., Kokawa H., Enomoto M., Jogan S. Microstructural evolution of 6063 aluminum during friction-stir welding. Metall Mater Trans A Phys Metall Mater Sci 1999, 30(9):2429-2437.
10. Sato Y., Kokawa H., Enomoto M., Jogan S., Hashimoto T. Precipitation sequence in friction stir weld of 6063 aluminum during aging. Metall Mater Trans A Phys Metall Mater Sci 1999, 30(12):3125-3130.
11. Guerra M., Schmidt C., McClure J., Murr L., Nunes A. Flow patterns during friction stir welding. Mater Charact 2003, 49(2):95-101.
12. Berbon P., Bingel W., Mishra R., Bampton C., Mahoney M. Friction stir processing: a tool to homogenize nanocomposite aluminum alloys. Scripta Mater 2001, 44(1):61-66.
13. Charit I., Mishra R. Abnormal grain growth in friction stir processed alloys. Scripta Mater 2008, 58(5):367-371.
14. Chen H.B., Yan K., Lin T., Chen S.B., Jiang C.Y., Zhao Y. The investigation of typical welding defects for 5456 aluminum alloy friction stir welds. Mater Sci Eng A 2006, 433(1-2):64-69.
15. Thomas W., Nicholas E. Friction stir welding for the transportation industries. Mater Des 1997, 18(4-6):269-273.
16. Ma Z., Mishra R., Mahoney M. Superplastic deformation behaviour of friction stir processed 7075 al alloy. Acta Mater 2002, 50(17):4419-4430.
17. Krishnan K. The effect of post weld heat treatment on the properties of 6061 friction stir welded joints. J Mater Sci 2002, 37(3):473-480.
18. Liu H., Fujii H., Maeda M., Nogi K. Heterogeneity of mechanical properties of friction stir welded joints of 1050-h24 aluminium alloy. J Mater Sci Lett 2003, 22(6):441-444.
19. Venkateswaran P., Xu Z.H., Li X., Reynolds A. Determination of mechanical properties of Al-Mg alloys dissimilar friction stir welded interface by indentation methods. J Mater Sci 2009, 44(15):4140-4147.
20. Lombard H., Hattingh D., Steuwer A., James M. Optimising fsw process parameters to minimise defects and maximise fatigue life in 5083-H321 aluminium alloy. Eng Fract Mech 2008, 75(3-4):341-354.
21. Cui G., Ma Z., Li S. The origin of non-uniform microstructure and its effects on the mechanical properties of a friction stir processed Al-Mg alloy. Acta Mater 2009, 57(19):5718-5729.
22. Sutton M., Reynolds A., Wang D.Q., Hubbard C. A study of residual stresses and microstructure in 2024-T3 aluminum friction stir butt welds. J Eng Mater Technol Trans ASME 2002, 124(2):215-221.
23. Sato Y., Park S., Kokawa H. Microstructural factors governing hardness in friction-stir welds of solid-solution-hardened al alloys. Metall Mater Trans A Phys Metall Mater Sci 2001, 32(12):3033-3042.
24. Sato Y., Sugiura Y., Shoji Y., Park S., Kokawa H., Ikeda K. Post-weld formability of friction stir welded al alloy 5052. Mater Sci Eng A 2004, 369(1-2):138-143.
25. Sato Y., Urata M., Kokawa H., Ikeda K. Hall-Petch relationship in friction stir welds of equal channel angular-pressed aluminium alloys. Mater Sci Eng A 2003, 354(1-2):298-305.
26. Attallah M., Davis C., Strangwood M. Microstructure-microhardness relationships in friction stir welded aa5251. J Mater Sci 2007, 42(17):7299-7306.
27. Adams-Hughes M, Kalu P, Khraisheh M, Chandra N. Microcharacterization and texture analysis of friction stir processed aa 5052 alloy. Friction Stir Welding and Processing III - Proceedings of a Symposium sponsored by the Shaping and Forming Committee of (MPMD) of the Minerals, Metals and Materials Society, TMS 2005. p. 3-10.
28. Adams-Hughes M., Kalu P., Principe E., Wright S. A 3d analysis of the nugget zone of aa5052 processed via friction stir processing. Microsc Microanal 2008, 14(suppl. 2):980-981.
29. Park S., Lee C., Kim J., Han H., Kim S.J., Chung K. Improvement of formability and spring-back of aa5052-h32 sheets based on surface friction stir method. J Eng Mater Technol Trans ASME 2008, 130(4):410071-4100710.
30. Bunge H. Texture analysis in materials science - mathematical methods 1982, Butterworth & Co.
31. Fujii H., Cui L., Maeda M., Nogi K. Effect of tool shape on mechanical properties and microstructure of friction stir welded aluminum alloys. Mater Sci Eng A 2006, 419(1-2):25-31.
32. Threadgill P. Terminology in friction stir welding. Sci Technol Weld Join 2007, 12(4):357-360.
33. Krishnan K. On the formation of onion rings in friction stir welds. Mater Sci Eng A 2002, 327(2):246-251.
34. Attallah M., Davis C., Strangwood M. Influence of base metal microstructure on microstructural development in aluminium based alloy friction stir welds. Sci Technol Weld Joining 2007, 12(4):361-369.
35. Booth D., Starink M., Sinclair I. Analysis of local microstructure and hardness of 13 mm gauge 2024-T351 aa friction stir welds. Mater Sci Technol 2007, 23(3):276-284.
36. Cui G., Ma Z., Li S. Periodical plastic flow pattern in friction stir processed al-mg alloy. Scripta Mater 2008, 58(12):1082-1085.
37. Fujimoto M., Koga S., Abe N., Sato Y., Kokawa H. Microstructural analysis of stir zone of al alloy produced by friction stir spot welding. Sci Technol Weld Joining 2008, 13(7):663-670.
38. Fonda R., Bingert J. Precipitation and grain refinement in a 2195 al friction stir weld. Metall Mat Trans A Phys Metall Mat Sci 2006, 37(12):3593-3604.
39. Su J.Q., Nelson T., Sterling C. Microstructure evolution during fsw/fsp of high strength aluminum alloys. Mater Sci Eng A 2005, 405(1-2):277-286.
40. Arora A., Zhang Z., De A., DebRoy T. Strains and strain rates during friction stir welding. Scripta Mater 2009, 61(9):863-866.
41. Darras B., Khraisheh M. Analytical modeling of strain rate distribution during friction stir processing. J Mater Eng Perform 2008, 17(2):168-177.
42. Chao Y., Qi X., Tang W. Heat transfer in friction stir welding - experimental and numerical studies. J Manuf Sci Eng Trans ASME 2003, 125(1):138-145.
43. Buffa G., Hua J., Shivpuri R., Fratini L. A continuum based fem model for friction stir welding - model development. Mater Sci Eng A 2006, 419(1-2):389-396.
44. Mahoney M., Rhodes C., Flintoff J., Spurling R., Bingel W. Properties of friction-stir-welded 7075 t651 aluminum. Metall Mater Trans A Phys Metall Mater Sci 1998, 29(7):1955-1964.