Improvement of formability and spring-back of AA5052-H32 sheets based on surface friction stir method

Journal of Engineering Materials and Technology

Volumn 130, Issue 4, 2008, Pages 0410071-04100710

  Park, Sangjoon ^a   Lee, Chang Gil ^b   Kim, Junehyung ^c   Han, Heung Nam ^a   Kim, Sung Joon ^b   Chung, Kwansoo ^a  

^a Seoul National University   (South Korea)

^b Korea Institute of Material Science   (South Korea)

^c SAMSUNG Electronics   (South Korea)

Author keywords

AA5xxx H sheets; Formability; Spring back; Surface friction stir (SFS) method

Indexed keywords

BENDING TESTS; FORMABILITY; FRICTION;

AA5XXX-H SHEETS; MACROSCOPIC MECHANICAL PROPERTIES; MATERIAL FLOW; SFS METHODS; SHEET SURFACE; SPRING BACK; SURFACE FRICTION STIR METHODS;

SPRINGS (COMPONENTS);

EID: 54949121451     PISSN: 00944289     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2975233     Document Type: Article

References (39)

1. Miller, W. S., Zhuang, L., Bottema, J., Wittebrood, A. J., Smet, P. D., Haszler, A., and Vieregge, A., 2000, "Recent Development in Aluminum Alloys for the Automotive Industry," Mater. Sci. Eng., A, 280, pp. 37-49.
2. Sato, Y. S., Sugiura, Y., Shoji, Y., Park, S. H., Kokawa, H., and Ikeda, K., 2004, "Post-Weld Formability of Friction Stir Welded Al Alloy 5052," Mater. Sci. Eng., A, 369, pp. 138-143.
3. Jansson, M., Nilsson, L., and Simonsson, K., 2005, "On Constitutive Modeling of Aluminum Alloys for Tube Hydroforming Applications," Int. J. Plast., 21, pp. 1041-1058.
4. Smerd, R., Winkler, S., Salisbury, C., Worswick, M:, Lloyd, D., and Finn, M., 2005, "High Strain Rate Tensile Testing of Automotive Aluminum Alloy Sheet," Int. J. Impact Eng., 32, pp. 541-560.
5. Lee, C. G., Park, S., Chung, K., Han, H. N., and Kim, S. J., 2006, "Improving Formability of 5052-H32 Al Sheets by Local Surface-Modification, " Proceedings of the 12th Conference on Mechanical Behaviors of Materials, Busan, Korea, K. S. Shin, ed., p. 116.
6. Thomas, M. W., Nicholas, E. D., Needham, J. C., Murch, M. G., Templesmith, P., and Dawes, C. J., 1991, GB Patent Application No. 9125978.8; 1995, U.S. Patent No. 5,460,317.
7. London, B., Mahoney, M., Bingel, W., Calabrese, M., Bossi, R. H., and Waldron, D., 2003, "Material Flow in Friction Stir Welding Monitored With Al-SiC and Al-W Composite Markers," TMS2003, CA, K. Jata et al., eds., p. 3.
8. Reynolds, A. P., and Tang, W., 2003, "Alloy, Tool Geometry, and Process Parameter Effects on Friction Stir Weld Energies and Resultant FSW Joint Properties," TMS2003, CA, K. Jata et al., eds., p. 3.
9. Lee, C. G., Kim, S. J., Han, H. N., Chung, K., and Park, S., 2008, U.S. Patent No. 11/510,988.
10. Lee, C. G., Kim, S. J., Han, H. N., Chung, K., and Park, S., 2007, Korea Patent No. 10-0680183-0000.
11. Mazzolani, F. M., 1985, Aluminum Alloy Structures, Taylor & Francis, MA, p. 8.
12. Totten, G. E., and MacKenzie, D. S., 2003, Handbook of Aluminum, Marcel Dekker, New York, p. 259.
13. Barlat, F., Brem, J. C., Yoon, J. W., Chung, K., Dick, R. E., Choi, S. H., Pourboghrat, F., Chu, E., and Lege, D. J., 2003, "Plane Stress Yield Function for Aluminum Alloy Sheets," Int. J. Plast., 19, pp. 1297-1319.
14. Hill, R., 1952, "On Discontinuous Plastic States With Special Reference to Localized Necking in Thin Sheets," J. Mech. Phys. Solids, 1, pp. 19-30.
15. Marciniak, Z., and Kuczynski, K., 1967, "Limits Strains in the Processes of Stretch-Forming Sheet Metal," Int. J. Mech. Sci., 9, pp. 609-620.
16. 2005, abaqus, User's Manual for Version 6.5, Hibbit, Karlsson & Sorensen Inc.
17. Chung, K., and Richmond, O., 1993, "A Deformation Theory of Plasticity Based on Minimum Work Paths," Int. J. Plast., 9, pp. 907-920.
18. Yoon, J. W., Yang, D. Y., and Chung, K., 2000, "A General Elasto-Plastic Finite Element Formulation Based on Incremental Deformation Theory for Planar Anisotropy and Its Application to Sheet Metal Forming," Int. J. Plast., 16, pp. 595-610.
19. Kaye, C., and Laby, T., 1986, Table of Physical and Chemical Constant, Longman, New York, p. 29.
20. Hosford, W. F., 1972, "A Generalized Isotropic Yield Criterion," ASME Trans. J. Appl. Mech., 39, pp. 607-609.
21. Woo, W., Choo, H., Brown, D. W., Liaw, P. K., and Feng, Z., 2006, "Texture Variation and Its Influence on the Tensile Behavior of a Friction-Stir Processed Magnesium Alloy," Scr. Mater., 54, pp. 1859-1864.
22. Gubicza, J., Chinh, N. Q., Csanadi, T., Langdon, T. G., and Ungar, T., 2007, "Microstructure and Strength of Severely Deformed FCC Metals," Mater. Sci. Eng., A, 462, pp. 86-90.
23. Simar, A., Brechet, Y., Meester, B., Denquin, A., and Pardoen, T., 2007, "Sequential Modeling of Local Precipitation, Strength and Strain Hardening in Friction Stir Welds of an Aluminum Alloy 6005A-T6," Acta Mater., 55, pp. . 6133-6143.
24. 2) Metallic Multilayers ," Acta Mater., 51, pp. 3157-3170.
25. Crumbach, M., Goerdeler, M., and Gottstein, G., 2006, "Modeling of Recrystallisation Textures in Aluminum Alloys: I. Model Set-Up and Integration," Acta Mater., 54, pp. 3275-3289.
26. Barnett, M. R., Keshavarz, Z., Beer, A. G., and Atwell, D., 2004, "Influence of Grain Size on the Compressive Deformation of Wrought Mg-3Al-lZn," Acta Mater., 52, pp. 5093-5103.
27. Engler, O., Lothar, L., and Jurgen, H., 2007, "Through-Process Simulation of Texture and Properties During the Thermomechanical Processing of Aluminum Sheets," Acta Mater., 55, pp. 5449-5463.
28. Lievers, W. B., Pilkey, A. K., and Lloyd, D. J., 2004, "Using Incremental Forming to Calibrate a Void Nucleation Model for Automotive Aluminum Sheet Alloys," Acta Mater., 52, pp. 3001-3007.
29. Kang, S. H., Chung, H. S., Han, H. N., Oh, K. H., Lee, C. G., and Kim, S. J., 2007, "Relationship Between Formability and Microstructure of Al Alloy Sheet Locally Modified by Friction Stir Processing," Scr. Mater., 57, pp. 17-20.
30. Lee, C. G., Kim, S. J., Lee, T. H., and Lee, S., 2004, "Effects of Volume Fraction and Stability of Retained Austenite on Formability in a 0.1C-1.5Si- 1.5Mn-0.5Cu TRIP-Aided Cold-Rolled Steel Sheet," Mater. Sci. Eng., A, 371, pp. 16-23.
31. Lee, W., Kim, J., Kim, D., Kim, C., Park, S., Wenner, M. L., Okamoto, K., Wagoner, R. H., and Chung, K., 2003, "Formability and Spring-Back Evaluation of Friction Stir Welded Automotive Sheets," TMS2007, FL, Shull et al., eds., p. 19.
32. Parente, M. P., Valente, R. A., Jorge, R. M., Cardoso, R. P., and Sousa, R. J., 2006, "Sheet Metal Forming Simulation Using EAS Solid-Shell Finite Elements," Finite Elem. Anal. Design, 42, pp. 1137-1149.
33. Tang, B. T., Zhao, Z., Lu, X. Y., Wang, Z. Q., Zhao, X. W., and Chen, S. Y., 2007, "Fast Thickness Prediction and Blank Design in Sheet Metal Forming Based on an Enhanced Inverse Analysis Method," Int. J. Mech. Sci., 49, pp. 1018-1028.
34. Lin, Z. Q., Wang, W. R., and Chen, G. L., 2007, "A New Strategy to Optimize Variable Blank Holder Force Towards Improving the Forming Limits of Aluminum Sheet Metal Forming," J. Mater. Process. Technol., 183, pp. 339-346.
35. Chung, K., Lee, M. G., Kim, D., Kim, C., Wenner, M. L., and Bartat, F., 2005, "Spring-Back Evaluation of Automotive Sheets Based on Isotropic-Kinematic Hardening Laws and Non-Quadratic Anisotropic Yield Function, Part I: Theory and Formulation," Int. J. Plast., 21, pp. 861-882.
36. Lee, M. G., Kim, D., Kim, C., Wenner, M. L., Wagoner, R. H., and Chung, K., 2005, "Spring-Back Evaluation of Automotive Sheets Based on Isotropic- Kinematic Hardening Laws and Non-Quadratic Anisotropic Yield Function, Part II: Characterization of Material Properties," Int. J. Plast., 21, pp. 883-914.
37. Lee, M. G., Kim, D., Kim, C., Wenner, M. L., and Chung, K., 2005, "Spring- Back Evaluation of Automotive Sheets Based on Isotropic-Kinematic Hardening Laws and Non-Quadratic Anisotropic Yield Function, Part III: Applications," Int. J. Plast, 21, pp. 915-953.
38. Chung, K., and Richmond, O., 1994, "The Mechanics of Ideal Forming," ASME J. Appl. Mech., 61, pp. 176-181.
39. Chung, K., and Alexandrov, S., 2007, "Ideal Flow in Plasticity," Appl. Mech. Rev., 60, pp. 316-335.