Laminated wood-ceramics prepared from beech veneer and phenol formaldehyde resin

Wood and Fiber Science

Volumn 42, Issue 4, 2010, Pages 474-479

  Sun, De Lin ^a   Yu, Xian Chun ^b   Liu, Wen Jin ^c   Sun, De Bin ^a  

^a CENTRAL SOUTH UNIVERSITY OF FORESTRY AND TECHNOLOGY   (China)

^b Yueyang Vocational and Technical College   (China)

^c NONE

Author keywords

Airtight sintering technology; Basic structure; Fracture toughness; Laminated wood ceramics

Indexed keywords

AIRTIGHT SINTERING TECHNOLOGY; BASIC STRUCTURE; BIOCARBON; CARBON YIELD; LAMINATED STRUCTURES; LAMINATED WOOD; LAYERED STRUCTURES; MATERIAL PROPERTY; MATERIAL TREATMENT; MICROSTRUCTURAL CHARACTERISTICS; PHENOL FORMALDEHYDE RESINS; PROGRESSIVE FAILURE; VOLUMETRIC SHRINKAGE;

CERAMIC MATERIALS; FORMALDEHYDE; FRACTURE; LAMINATING; PHENOLS; SINTERING; SYNTHETIC RESINS; VENEERS; WOOD;

FRACTURE TOUGHNESS;

CERAMICS; FORMALDEHYDE; FRACTURE; LAMINATION; PHENOLS; SINTERING; TECHNOLOGY; VENEERS; WOOD;

FAGUS;

EID: 78649796078     PISSN: 07356161     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (19)

1. Akagaki T, Hokkirigawa K, Okabe T, Saito K (1999) Friction and wear of woodceramics under oil and water lubricated sliding contacts. J Porous Mater 6(3): 197-204.
2. Clegg J, Kendall K, Alford NM, Button TW, Birchall JD (1990) A simple way to make tough ceramics. Nature 347(10): 455-457.
3. Greil P, Vogli E, Feya T, Bezold A, Popovska N, Gerhard H, Sieber H (2002) Effect of microstructure on the fracture behavior of biomorphous silicon carbide ceramics. J Eur Ceram Soc 22:2697-2707.
4. Hirose T, Fan TX, Okabe T (2002) Effect of carbonizing speed on the property changes of woodceramics impregnated with liquefacient wood. Mater Lett 52(3): 229-233. (Pubitemid 33107013)
5. Iizzuka H, Fushitani M, Okabe T, Ssito K (1999) Mechanical properties of woodceramics: A porous carbon material. J Porous Mater 6:175-184.
6. Kasai K, Shibata K, Satito K, Okabe T (1997) Humidity sensor characteristics of woodceramics. J Porous Mater 4:277-280.
7. Li DY, Qiao GJ, Jin ZH (2004) R-curve behavior of laminated SiC/BN ceramics. Ceram Int 30:213-217.
8. Li J, Li SJ (2006) Pyrolysis of medium density fiberboard impregnated with phenol-formaldehyde resin. Wood Sci Technol 52(4):331-336.
9. Li SJ (2001) Study on a new porous carbon materialwoodceramics. MS thesis, Northeast Forestry University, Harbin, China. Pages 24-57.
10. Qian JM, Jin ZH, Wang XW (2004a) Porous SiC ceramics fabricated by reactive infiltration of gaseous silicon into charcoal. Ceram Int 30:947-951.
11. Qian JM, Jin ZH, Wang JP (2004b) Study on structural changes during preparing wood-ceramics from phenolics resin/basswood powder composite. Acta Metall Sin (China) Acta Materiae Compositae Sinica 21(4):18-23.
12. Suda T, Kondo N, Okabe T, Saito K (1999) Electrical properties of woodceramics. J Porous Mater 6:255-258.
13. Sun DL, Yu XC, Liu WJ, Sun DB, Liu DT (2009) Effects of sintering conditions on microstructure changes of wood-ceramics impregnated with low-molecular-weight phenol formaldehyde resin. Wood Fiber Sci 41(4):433-439.
14. Tao YB (2006) Study on the woodceramics in net shape fabricated by sintering wood materials/phenolic resin. MS thesis, Northeast Forestry University, Harbin, China. Pages 42-46.
15. Treusch O, Hofenauer A, Tröger F, Fromm J, Wegener G (2004) Basic properties of specific wood-based materials carbonised in a nitrogen atmosphere. Wood Sci Technol 38:323-333.
16. Yang G, Liu YJ, Qiao GJ (2008) Preparation and R-curve properties of laminated Si/SiC ceramics from paper. Mater Sci Eng A 492:327-332.
17. Zhang D, Xie XQ, Fan TX (2002a)Morphology and damping characteristics of woodceramics. J Mater Sci 37:4457-4463.
18. Zhang D, Sun BH, Fan TX (2004b) Preparation and analysis on microstructure of morph-genetic materials. Sci China Ser E 34(7):721-729.
19. Zhao BY, Hirose T, Okabe T, Zhang D, Fan TX, Hu KA (2002) Woodceramics prepared from wood powder/phenolated wood composite. J Porous Mater 9:195-201.