Study on structural changes during preparing woodceramics from phenolic resin/basswood powder composite

Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica

Volumn 21, Issue 4, 2004, Pages 18-23

  Qian, Junmin ^a   Jin, Zhihao ^a   Wang, Jiping ^a  

^a XI'AN JIAOTONG UNIVERSITY   (China)

Author keywords

Carbon composite; Carbonization; Characterization; Vacuum high pressure impregnation; Woodceramics

Indexed keywords

CARBONIZATION; CHEMICAL BONDS; COMPOSITE MATERIALS; FOURIER TRANSFORM INFRARED SPECTROSCOPY; PHENOLIC RESINS; SCANNING ELECTRON MICROSCOPY; X RAY DIFFRACTION ANALYSIS;

BASSWOOD POWDER; FORMING ABILITY; INTERCONNECTED POROUS NETWORK MICROSTRUCTURE; NONGRAPHITIZABLE CARBON; STRUCTURAL CHANGES; VACUUM HIGH PRESSURE IMPREGNATION; WOODCERAMICS;

POROUS MATERIALS;

EID: 5144221058     PISSN: 10003851     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (31)

1. Hirose T, Zhao B Y, Okabe T, et al. Effect of carbonization temperature on the basic properties of woodceramics made from carbonized bamboo fiber and liquefied wood[J]. J Mater Sci, 2002, 37(16): 3453-3458.
2. Kasai K, Shibata K, Saito K, et al. Humidity sensor characteristics of woodceramics[J]. J Porous Mat, 1997, 4(4): 277-280.
3. Shibata K, Okabe T, Saito K, et al. Electromagnetic shielding properties of woodceramics made from wastepaper[J]. J Porous Mat, 1997, 4(4): 269-275.
4. Zhang D, Xie X Q, Fan T X, et al. Morphology and damping characteristics of woodceramics[J]. J Mater Sci, 2002, 37(20): 4457-4463.
5. Xie X Q, Fan T X, Sun B H, et al. Dry sliding friction and wear behavior of woodceramics/Al-Si composites[J]. Mater Sci Eng, 2003, A342(1-2): 287-293.
6. Suda T, Kondo N, Okabe T, et al. Electrical properties of woodceramics[J]. J Porous Mat, 1999, 6(3): 255-258.
7. Akagaki T, Hokkirigawa K, Okabe T, et al. Friction and wear of woodceramics under oil and water lubricated sliding contacts[J]. J Porous Mat, 1999, 6(3): 197-204.
8. Xie X Q, Fan T X, Zhang D, et al. Increasing the mechanical properties of high damping woodceramics by infiltration with a magnesium alloy[J]. Compos Sci Technol, 2002, 62(10-11): 1341-1346.
9. Fujino T, Calderon-Moreno J M, Swamy S, et al. Phase and structural change of carbonized wood materials by hydrothermal treatment[J]. Solid State Ionics, 2002, 151(1-4): 197-203.
10. Cheng H M, Endo H, Okabe T, et al. Graphitization behavior of wood ceramics and bamboo ceramics as determined by X-ray diffraction[J]. J Porous Mat, 1999, 6(3): 233-237.
11. Fan T X, Hirose T, Okabe T, et al. Surface area characteristics of woodceramics[J]. J Porous Mat, 2001, 8(3): 211-217.
12. Hirose T, Fujino T, Fan T X, et al. Effect of carbonization temperature on the structural changes of woodceramics impregnated with liquefied wood[J]. Carbon, 2002, 40(5): 761-765.
13. Suda T, Kakishita K. Electrical properties of woodceramics humidity sensor[J]. Trans Mater Res Soc Jpn, 1999, 24(2): 305-309.
14. Xie X Q, Zhang D, Fan T X, et al. The fabrication of composites with interpenetrating networks based on woodceramics[J]. Mater Lett, 2002, 56(1-2): 102-107.
15. Hata K, Shibata K, Okabe T, et al. Influence of laser beam irradiation conditions on the machinability of medium density fiberboard impregnated with phenolic resin[J]. J Porous Mat, 2000, 7(4): 483-490.
16. Kano M, Momota M, Okabe T, et al. Specific heat capacity of new porous carbon materials: Woodceramics[J]. Thermochim Acta, 1997, 292(1-2): 175-177.
17. Hirose T, Fan T X, Okabe T, et al. Effect of carbonizing speed on the property changes of woodceramics impregnated with liquefied wood[J]. Mater Lett, 2002, 52(3): 229-233.
18. Xie X Q, Fan T X, Zhang D, et al. Mechanical properties and damping behavior of woodceramics/ZK60A Mg alloy composite[J]. Mater Res Bull, 2002, 37(6): 1133-1140.
19. Iizuka H, Fushitani M, Okabe T, et al. Mechanical properties of woodceramics: A porous carbon material[J]. J Porous Mat, 1999, 6(3): 175-184.
20. Onodera A, Terashima K, Urushihara T, et al. High-pressure synthesis of diamond from phenolic resin[J]. J Mater Sci, 1997, 32(16): 4309-4318.
21. Tzeng S S, Chr Y G. Evolution of microstructure and properties of phenolic resin-based carbon/carbon composites during pyrolysis[J]. Mater Chem Phys, 2002, 73(2-3): 162-169.
22. Byrne C E, Nagle D C. Carbonized wood monoliths-characterization[J]. Carbon, 1997, 35(2): 267-273.
23. Kercher A K, Nagle D C. Microstructural evolution during charcoal carbonization by X-ray diffraction analysis[J]. Carbon, 2003, 41(1): 15-27.
24. Wang X, Zhang G M, Zhang Y L, et al. Graphitization of glassy carbon prepared under high temperatures and high pressures[J]. Carbon, 2003, 41(1): 188-191.
25. Cuesta A, Dhamelincourt P, Laureyns J, et al. Comparative performance of X-ray diffraction and Raman microprobe techniques for the study of carbon materials[J]. J Mater Chem. 1998, 8(12): 2875-2879.
26. Shiraishi M. New introduction to carbon materials[M]. Tokyo: Realize, 1996. 24-31.
27. Braun A, Bartsch M, Schnyder B, et al. X-ray scattering and adsorption studies of thermally oxidized glassy carbon[J]. J Non-Cryst Solids, 1999, 260(1-2): 1-14.
28. Hirose T, Fan T X, Okabe T, et al. Effect of carbonization temperature on the basic properties of woodceramics impregnated with liquefied wood[J]. J Mater Sci, 2001, 36(17): 4145-4149.
29. Dubois M, Naji A, Buisson J P, et al. Characterisation of carbonaceous materials derived from polyparaphenylene pyrolyzed at low temperature[J]. Carbon, 2000, 38(9): 1411-1417.
30. Ercin D, Yurum Y. Carbonisation of fir (Abies bornmulleriana) wood in an open pyrolysis system at 50-300°C[J]. J Anal Appl Pyrol, 2003, 67(1): 11-22.
31. Hata K, Shibata K, Okabe T, et al. Laser beam machining of porous woodceramics[J]. J Porous Mat, 1998, 5(1): 65-75.