Bearing lubrication assessment using an statistical analysis of the stator current spectrum

19th International Conference on Electrical Machines, ICEM 2010

Volumn , Issue , 2010, Pages

  Morinigo Sotelo, Daniel ^a,b   Duque Perez, Oscar ^a   Garcia Escudero, Luis Angel ^a,c   Perez Alonso, Marcelo ^d,e  

^a UNIVERSITY OF VALLADOLID   (Spain)

^b FOUNDATION FOR RESEARCH AND DEVELOPMENT IN TRANSPORT AND ENERGY   (Spain)

^c Department of Statistics and Operational Research ^*

^d Renfe Operadora   (Spain)

^e UNIVERSIDAD ANTONIO DE NEBRIJA   (Spain)

Author keywords

Bearing; Lubrication; Monitoring; Spectral analysis; Statistical analysis

Indexed keywords

ACOUSTIC MONITORING; ANALYSIS OF COVARIANCES; BEARING; CURRENT CONSUMPTION; DAMAGING EFFECTS; HEAT EVACUATION; INTEGER HARMONICS; MOTOR CURRENT SIGNATURE ANALYSIS; SHORT TERM; SPECTRAL ANALYSIS; STATISTICAL ANALYSIS; STATOR CURRENTS;

CONDITION MONITORING; ELECTRIC MACHINERY; GEARS; INDUCTION MOTORS; REGRESSION ANALYSIS; SPECTRUM ANALYSIS; SPECTRUM ANALYZERS; STATORS;

LUBRICATION;

EID: 78649569493     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/ICELMACH.2010.5608470     Document Type: Conference Paper

References (36)

1. V. Wowk, Machinery Vibration: Measurement and Analysis. New York, USA, MacGraw-Hill, 1991.
2. Z. Cay, O. Henze and T. Weiland, "Modeling and simulation of rolling element bearings in inverter-fed AC motors," in International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM 2008), Ischia, Italy, June 2008, pp. 1333-1336.
3. B. De Vivo, L. Egiziano, P. Lamberti and V. Tucci, "Influence of circuit parameters on the electric discharge machining of the bearings of a PWM inverter driven motor," in International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM 2008), Ischia, Italy, June 2008, pp. 1321-1324.
4. W. Hofmann and J. Zitzelsberger, "PWM-control methods for common mode voltage minimization - a survey," in International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM 2006), Taormina, Italy, May 2006, pp. 1162-1167.
5. H.A. Toliyat and G.B. Kliman, Handbook of Electric Motors, Boca Raton, USA, CRC Press, 2004.
6. Anonymous, "Bearing Lubrication (in Spanish)," FAG Sales Europe Iberia, 1997 (http://www.fag.com).
7. SKF Information (http://www.skf.com).
8. J. Wright, "Electric motor lubrication," Machinery Lubrication Magazine, Nov. 2007.
9. J. Wright, "Lubricating electric motors," Machinery Lubrication Magazine, March 2008.
10. J.S. Honeycutt, "A Proven Electric Motor Regreasing Program," Reliability Web, 2010. Available online: http:// reliabilityweb.com.
11. M. E. H. Benbouzid, "A review of induction motors signature analysis as a medium for faults detection," IEEE Trans. Ind. Electron., vol. 47, no. 5, pp. 984-993, 2000.
12. M.E.H. Benbouzid and G.B. Kliman, "What stator current processing based technique to use for induction motor rotor faults diagnosis?" IEEE Trans. Energy Convers., vol. 18, no. 2, pp. 238-244, 2003.
13. J.-H. Jung, J.-J. Lee, and B.-H. Kwon, "Online diagnosis of induction motors using MCSA," IEEE Trans. Ind. Electron., vol. 53, no. 6, pp. 1842-1852, 2006.
14. A. Bellini, F. Filippetti, C. Tassoni, and G. A. Capolino, "Advances in Diagnostic Techniques for Induction Machines", IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4109-4126, Dec. 2008.
15. L. Frosini, E. Bassi, A. Fazzi and C. Gazzaniga, "Use of stator current for condition monitoring of bearings in induction motors," in Proc. of the 2008 International Conference on Electrical Machines (ICEM 2008), Vilamoura, Portugal, September 2008.
16. L. Frosini and E. Bassi, "Stator Current and Motor Efficiency as Indicators for Different Types of Bearing Faults in Induction Motors," IEEE Trans. Ind. Electron., vol. 57, pp. 244-251, Jan. 2010.
17. O. Duque, M. Perez and Daniel Morinigo, "Detection of bearing faults in cage induction motors fed by frequency converter using spectral analysis of line current," in Proc. of IEEE International Conference on Electric Machines and Drives (IEMDC'05), San Antonio, USA, May 2005, pp. 17-22.
18. B. Akin, U. Orguner, H. A. Toliyat, and M. Rayner, "Low order PWM inverter harmonics contributions to the inverter-fed induction machine fault diagnosis," IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 610-619, 2008.
19. O. Duque-Perez, M. Perez-Alonso, and D. Morinigo-Sotelo, "Practical application of the spectral analysis of line current for the detection of mixed eccentricity in cage induction motors fed by frequency converter." in Proc. 16th International Conference on Electrical Machines (ICEM04), Cracow, Poland, 2004.
20. D. Morinigo-Sotelo, L.A. Garcia-Escudero, O. Duque-Perez and M. Perez-Alonso, "Practical aspects of mixed eccentricity detection in PWM voltage source inverter fed induction motors," IEEE. Trans. Ind. Electron., vol. 57, pp. 252-262, Jan. 2010.
21. D. Morinigo-Sotelo, L. A. Garcia-Escudero, O. Duque-Perez, and M. Perez-Alonso, "Some practical aspects of eccentricity detection in induction motors for different supply conditions," in Proc. 18th International Conference on Electrical Machines (ICEM'08), Vilamoura, Portugal, Sep. 2008.
22. W. T. Thomson, D. Rankin, and D. G. Dorrell, "On-line current monitoring to diagnose airgap eccentricity in large three-phase induction motors - industrial case histories verify the predictions," IEEE Trans. Energy Convers., vol. 14, no. 4, pp. 1372-1378, 1999.
23. J. R. Stack, R. G. Harley, and T. G. Habetler, "An amplitude Modulation detector for fault diagnosis in rolling element bearings", IEEE Trans. Ind. Electron., vol. 51, no. 5, pp. 1097-1102, 2004.
24. J. R. Stack, T. G. Habetler, and R.G. Harley, "Fault-signature modelling and detection of inner-race bearing faults", IEEE Trans. Ind. Appl., vol. 42, no. 1, pp. 61-68, Jan./Feb. 2006.
25. A. M. Knight and S. P. Bertani, "Mechanical fault detection in a medium sized induction motor using stator current monitoring", IEEE Trans. Energy Convers., vol. 20, no. 4, pp. 753-760, 2005.
26. J. Antonino-Daviu, P. Jover-Rodriguez, M. Riera-Guasp, A. Arkkio, and J. Roger-Folch, "DWT analysis of numerical and experimental data for the diagnosis of dynamic eccentricities in induction motors," Mech. Syst. Signal Proc., vol. 21, no. 6, pp. 2575-2589, 8 2007.
27. M. Riera-Guasp, J. A. Antonino-Daviu, M. Pineda-Sanchez, R. Puche- Panadero, and J. Perez-Cruz, "A general approach for the transient detection of slip-dependent fault components based on the discrete wavelet transform," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4167-4180, 2008.
28. J. Milimonfared, H. M. Kelk, S. Nandi, A. D. Minassians, and H. Toliyat, "A novel approach for broken-rotor-bar detection in cage induction motors," IEEE Trans. Ind. Appl., vol. 35, no. 5, pp. 1000-1006, 1999.
29. Antonino-Daviu, M. Riera-Guasp, J. Roger-Folch, and M. Molina, "Validation of a new method for the diagnosis of rotor bar failures via wavelet transform in industrial induction machines," IEEE Trans. Ind. Appl., vol. 42, no. 4, pp. 990-996, 2006.
30. H. Douglas, P. Pillay, and A. Ziarani, "Broken rotor bar detection in induction machines with transient operating speeds," IEEE Trans. Energy Convers., vol. 20, no. 1, pp. 135-141, 2005.
31. P. Vas, Parameter Estimation, Condition Monitoring, and Diagnosis of Electrical Machines, Clarendron Press, Oxford, 1993.
32. S. Berry and R. Belmans, "How to track rolling element bearing health with vibration signature analysis," Sound and Vibration, vol. 25, no. 11, pp. 133-139, 1991.
33. S. Nandi and H.A. Toliyat, "Fault Diagnosis of Electrical Machines - A Review," IEEE Trans. Ind. Appl., vol IA-23, no. 5, pp. 842-846, 1987.
34. R.R. Schoen, T.G. Habetler, F. Kamran and R.G. Bartheld, "Motor Bearing Damage Detection Using Stator Current Monitoring," IEEE Trans. Ind. Appl., vol. 31, no. 6, pp. 1274-1279, 1995.
35. R Development Core Team (2009). R: A language and environment for statistical computing. R Foundation for Statistical Computing, Vienna, Austria. ISBN 3-900051-07-0, URL http://www.R-project. org.
36. D. Morinigo-Sotelo, O. Duque-Perez and M. Perez-Alonso, "Assessment of the lubrication condition of a bearing using spectral analysis of the stator current", in Proc. of 20th International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM 2010), Pisa, Italy, 2010, pp. 1160-1165.