Glass hardness and elastic modulus determination by nanoindentation using displacement and energy methods

Ceramics - Silikaty

Volumn 54, Issue 3, 2010, Pages 225-234

  Chorfa, Abdellah ^a   Madjoubi, Mohamed Abderahim ^b   Hamidouche, Mohamed ^b   Bouras, Nadir ^b   Rubio, Juan ^c   Rubio, Fausto ^c  

^a UNIVERSITY OF SKIKDA   (Algeria)

^b FERHAT ABBAS UNIVERSITY   (Algeria)

^c CSIC   (Spain)

Author keywords

Elastic modulus; Glasses; Hardness; Nano indentation

Indexed keywords

B METHOD; BERKOVICH INDENTERS; C METHOD; CONTACT STIFFNESS; DISPLACEMENT ANALYSIS; ENERGY METHOD; ENERGY OF DEFORMATION; EQUIPMENT SYSTEM; EXPERIMENTAL STUDIES; HARDNESS AND ELASTIC MODULUS; INDENTERS; LINEAR ENERGY; MEASURED PROPERTIES; MICRO MATERIALS; NON-LINEAR; PEAK LOAD; RELATIVE IMPORTANCE; SODA LIME GLASS; SURFACE AREA; THERMAL DRIFTS;

ELASTIC MODULI; HARDNESS; INSTRUMENT ERRORS; INSTRUMENTS; LIME; NANOINDENTATION; VICKERS HARDNESS TESTING;

BOROSILICATE GLASS;

EID: 78649510162     PISSN: 08625468     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (32)

1. Wolf B., Paufler P.: Phys. Stat. Sol. A, 341 (1999).
2. Pharr G. M.: Mater. Sci. Eng. 253, 151 (1998).
3. Tabor D.: Phil. Mag. A 74, 1207 (1996).
4. Nix W. D., Gao H.: J. Mech. Phys. Solids 46, 411 (1998).
5. Ma Q., Clarke D. R: J. Mater. Res. 10, 853 (1995).
6. Swadener J. G., Taljat B., Pharr G. M.: J. Mater. Res. 6, 2091 (2001).
7. Pethica J.B., Hutchings R., Oliver W.C.: Phil. Mag. A 48, 593 (1983).
8. Tabor D.: Proc. R. Soc. Lond. A 192, 247 (1948).
9. Bulychev S. I., Alekhin V. P., Shorshorov M. K., Ternorskii P.: Zavod. Lab. 41, 11137 (1975).
10. Oliver W. C., Pharr G. M.: J. Mater. Res 7, 1564 (1992).
11. Oliver W. C., Pharr G. M.: J. Mater. Res. 19, 3 (2004).
12. Bhushan B.: Handbook of micro/nanotribology, 2nd ed., CRC Press, Boca Raton (FL) 1999.
13. Fischer-Cripps A. C.: Nanoindentation, 2nd ed, Springer, New York 2004.
14. Bolshakov A., Pharr G. M.: J. Mater. Res. 13, 1049 (1998).
15. Hay J. C., Bolshakov A., Pharr G. M.: J. Mater. Res. 14, 2296 (1999).
16. Randall NX, Julia-Schmutz C., Soro J. M.: Surf. Coat.Tech. 108, 489 (1998).
17. Mcelhaney K., Vlasaak J., Nix W.: J. Mater. Res. 13, 1300 (1998).
18. Hay J. L., Pharr G. M.: Instrumented indentation testing, ASM Handbook, Vol 8, Mechanical testing and evaluation,10 ed, p.232-243, Materials Park, OH 2000.
19. Cheng Y. T., Cheng C. M.: Mat. Sci.Eng. R 44, 91 (2004).
20. Chen J., Bull S. J.: J. Mater. Res. 24, 590 (2009).
21. ISO 14577, Metallic materials-Instrumented indentation test for hardness and materials parameters. ISO Central Secretariat, 1 rue de Varembé, 1211 Geneva 20 Switzerland
22. King R. B.: Int. J. Sol. Str. 2, 1657 (1987).
23. Hay J. L., Pharr G. M.: Instrumented indentation testing, The university of Tennesse and Oak Ridge national laboratory.
24. Meza J. M., Franco E. E., Buiochi F., Farias C. M., Souza R. M. et al.: Rev. Metal. Madrid. 44, 52 (2007).
25. Cheng Y. T., Li Z., Cheng C. M.: Phil. Mag. A 82 (2002).
26. Cheng Y. T., Cheng C. M.: Appl. Phys. Lett. 73, 614 (1997).
27. Giannakopoulos A.E., Suresh S.: Scr. Mater. 40, 1191 (1999).
28. Ma D., Chung W., Liu J., He J.: Sci. China. Ser. E 47, 398 (2004).
29. Alkorta J., Marttinez-Esnaola J. M., Sevillano J. G.: J. Mater. Res. 21, 302 (2006).
30. Malzbender J.: J. Mater. Res. 20, 1090 (2005).
31. Venkatesh T. A., Van Vleit K. J., Ginnakopoulos A. E., Suresh S.: Scri. Mater. 42, 833 (2000).
32. Malzbender J., G de With: J. Mater. Res 17, 502 (2002).