Determination of Young's modulus by nanoindentation

Science in China, Series E: Technological Sciences

Volumn 47, Issue 4, 2004, Pages 398-408

  Ma, Dejun ^a   Chung, Wo Ong ^b   Liu, Jianmin ^a   He, Jiawen ^c  

^a CMES   (China)

^b HONG KONG POLYTECHNIC UNIVERSITY   (Hong Kong)

^c XI'AN JIAOTONG UNIVERSITY   (China)

Author keywords

Indentation work; Nanoindentation; Nominal hardness; Young's modulus

Indexed keywords

FINITE ELEMENT METHOD; HARDNESS; LOADS (FORCES); MATHEMATICAL MODELS; NANOINDENTATION;

INDENTATION DEPTH; INDENTATION LOAD; NOMINAL HARDNESS;

ELASTIC MODULI;

EID: 29044445017     PISSN: 10069321     EISSN: 1862281X     Source Type: Journal    
DOI: 10.1360/03ye0590     Document Type: Article

References (11)

1. Pethica, J. B., Hutchings, R., Oliver, W. C., Hardness measurement at penetration depth as small as 20nm, Phil. Mag. A, 1983, 48(4): 593-606.
2. Loubet, J. L., Georges, J. M., Marchesini, O., Meille, G., Vickers indentation curves of magnesium oxide (MgO), J. Tribology, 1984, 106(1): 43-48.
3. Newey, D., Wilkens, M. A., Pollock, H. M., An ultra-low-load penetration hardness tester, J. Phys. E: Sci. Instrum, 1982, 15(1): 119-122.
4. Oliver, W. C., Pharr, G. M., An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, J. Mater. Res., 1992, 7(6): 1564-1583.
5. Pharr, G. M., Oliver, W. C., Brotzen, F. R., On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation, J. Mater. Res., 1992, 7(3): 613-617.
6. Cheng, Y. -T., Li, Z., Cheng, C.-M., Fundamentals of Nanoindentation and Nanotribology II, (eds. Baker, S. P., Cook, R. F., Corcoran, S. G. et al. in MRS Proc. 649, Warrendale, PA, 2001), Q1.1.
7. Cheng, Y. -T., Cheng, C. -M., Relationships between hardness, elastic modulus, and the work of indentation, Appl. Phys. Lett., 1998, 73(5): 614-616.
8. Giannakopoulos, A. E., Suresh, S., Determination of elastoplastic properties by instrumented sharp indentation, Scripta Mater., 1999,40(10): 1191-1198.
9. Venkatesh, T. A., Van Vliet, K.J., Giannakopoulos, A. E. et al., Determination of elasto-plastic properties by instrumented sharp indentation: guidelines for property extraction, Scripta Mater., 2000, 42(9): 833-839.
10. Dao, M., Chollacoop, N., Van Vliet., K. J. et al., Computational modeling of the forward and reverse problems in instrumented sharp indentation, Acta Mater., 2001, 49(19): 3899-3918.
11. Karlsson & Hibitt, Sorensen Inc. ABAQUS Theory Manual Version 6.2, Pawtucket, 2000.