A fatigue model for contacts under mixed elastohydrodynamic lubrication condition

International Journal of Fatigue

Volumn 33, Issue 3, 2011, Pages 427-436

  Li, Sheng ^a   Kahraman, Ahmet ^a  

^a The Ohio State University   (United States)

Author keywords

High cycle fatigue; Life prediction; Mixed lubrication; Pitting; Surface roughness

Indexed keywords

ASPERITY CONTACTS; CONTACT FATIGUES; CONTACT ZONE; CRACK NUCLEATION; ELASTIC STRESS FIELD; EULERIAN APPROACH; FATIGUE MODEL; HIGH CYCLE FATIGUE; LAGRANGIAN; LIFE PREDICTIONS; MATING SURFACES; MIXED ELASTOHYDRODYNAMIC LUBRICATIONS; MIXED LUBRICATION; MODEL PREDICTION; MODELING METHODOLOGY; MULTI-AXIAL FATIGUE CRITERION; POTENTIAL THEORY; ROLLING CONTACT FATIGUE; SHEAR TRACTION; STRESS FORMULATION; STRESS TIME; SURFACE CONTACT; SURFACE ROUGHNESS EFFECTS; SURFACE ROUGHNESS PROFILES; SURFACE STRESS;

CRACKS; ELASTOHYDRODYNAMICS; FATIGUE OF MATERIALS; FORECASTING; GEAR TEETH; METAL ANALYSIS; NUCLEATION; PITTING; SURFACE PROPERTIES; SURFACE ROUGHNESS; THREE DIMENSIONAL;

ELASTOHYDRODYNAMIC LUBRICATION;

EID: 78649330501     PISSN: 01421123     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijfatigue.2010.09.021     Document Type: Article

References (51)

1. J.W. Ringsberg, M. Loo-Morrey, B.L. Josefson, A. Kapoor, and J.H. Beynon Prediction of fatigue crack initiation for rolling contact fatigue Int J Fatigue 22 2000 205 215
2. J.W. Ringsberg Life prediction of rolling contact fatigue crack initiation Int J Fatigue 23 2001 575 586
3. M. Šraml, J. Flašker, and I. Potrč Numerical procedure for predicting the rolling contact fatigue crack initiation Int J Fatigue 25 2003 585 595
4. Liu Y. Stochastic modeling of multiaxial fatigue and fracture. PhD Thesis, Vanderbilt University; 2006.
5. Y. Jiang, and H. Sehitoglu A model for rolling contact fatigue Wear 224 1999 38 49
6. W. Cheng, H.S. Cheng, T. Mura, and L.M. Keer Micromechanics modeling of crack initiation under contact fatigue J Tribol 116 1994 2 8
7. S. Glodež, H. Winter, and H.P. Stuwe A fracture mechanics model for the wear of gear flanks by pitting Wear 208 1997 177 183
8. S. Glodež, J. Flašker, and Z. Ren A new model for the numerical determination of pitting resistance of gear teeth flanks Fatigue Fract Eng Mater Struct 20 1997 71 83
9. J. Flašker, G. Fajdiga, S. Glodež, and T.K. Hellen Numerical simulation of surface pitting due to contact loading Int J Fatigue 23 2001 599 605
10. H. Qiao, H.P. Evans, and R.W. Snidle Comparison of fatigue model results for rough surface elastohydrodynamic lubrication J Eng Tribol 222 2008 381 393
11. D. Epstein, L.M. Keer, Q.J. Wang, H.S. Cheng, and D. Zhu Effect of surface topography on contact fatigue in mixed lubrication Tribol Trans 46 2003 506 513
12. D. Zhu, N. Ren, and Q.J. Wang Pitting life prediction based on a 3D line contact mixed EHL analysis and subsurface von Mises stress calculation J Tribol 131 2009 041501
13. E.V. Zaretsky Fatigue criterion to system design, life and reliability J Propul Power 3 1987 76 83
14. S. Li, and A. Kahraman A mixed EHL model with asymmetric integrated control volume discretization Tribol Int 42 2009 1163 1172
15. Y. Liu, and S. Mahadevan A unified multiaxial fatigue damage model for isotropic and anisotropic materials Int J Fatigue 29 2007 347 359
16. Bluestein JM. An experimental study of the impact of various tooth surface treatments on spur gear pitting life. M.S. Thesis, The Ohio State University; 2008.
17. Klein M. An experimental investigation of the engineered surface treatments on gear pitting life. M.S. Thesis, The Ohio State University; 2009.
18. Z. Rahman, H. Ohba, T. Yoshioka, and T. Yamamoto Incipient damage detection and its propagation monitoring of rolling contact fatigue by acoustic emission Tribol Int 42 2009 807 815
19. G. Hoffmann, F.G. Hanejko, and R.H. Slattery Crack initiation and propagation in RCF 2006 a new approach to understanding pitting failure of highly loaded gears SAE World Congress, Detroit, USA
20. Y.Z. Hu, and D. Zhu A full numerical solution to the mixed lubrication in point contacts J Tribol 122 2000 1 9
21. D. Zhu On some aspects of numerical solutions of thin-film and mixed elastohydrodynamic lubrication J Eng Tribol 221 2007 561 579
22. N. Ren, D. Zhu, W.W. Chen, Y. Liu, and Q.J. Wang A three-dimensional deterministic model for rough surface line-contact EHL problems J Tribol 131 2009 011501
23. C.H. Venner EHL film thickness computations at low speeds: risk of artificial trends as a result of poor accuracy and implications for mixed lubrication modeling J Eng Tribol 219 2005 285 290
24. S. Li, A. Vaidyanathan, J. Harianto, and A. Kahraman Influence of design parameters on mechanical power losses of helical gear pairs J Adv Mech Des, Syst Manuf 3 2 2009 146 158
25. K.J. Johnson Contact mechanics 1985 Cambridge University Press Cambridge
26. S. Wu, and H.S. Cheng A friction model of partial-EHL contacts and its application to power loss in spur gears Tribol Trans 34 1991 398 407
27. W.T. Lai, and H.S. Cheng Temperature analysis in lubricated simple sliding rough contacts ASLE Trans 28 1984 302 312
28. S. Li, and A. Kahraman Prediction of spur gear mechanical power losses using a transient elastohydrodynamic lubrication model Tribol Trans 53 2010 554 563
29. D.A. Hills, D. Nowell, and A. Sackfield Mechanics of elastic contacts 1993 Butterworth-Heinemann Boston
30. J.J. Kalker Numerical calculation of the elastic field in a half-space Commun Appl Numer Methods 2 1986 401 410
31. T. Matake An explanation of fatigue limit under combined stress Bull JSME 20 1977 257 263
32. D.L. McDiarmid A general criterion for high cycle multiaxial fatigue failure Fatigue Fract Eng Mater Struct 14 1991 429 453
33. D.L. McDiarmid A shear stress based critical-plane criterion of multiaxial fatigue failure for design and life prediction Fatigue Fract Eng Mater Struct 17 1994 1475 1484
34. F.S. Darrell, and B.M. Gary Multiaxial fatigue 2000 SAE International Warrendale (PA)
35. L. Susmel, and P. Lazzarin A bi-parametric Wohler curve for high cycle multiaxial fatigue assessment Fatigue Fract Eng Mater Struct 25 2002 63 78
36. L. Susmel, and P. Lazzarin A stress-based method to predict lifetime under multiaxial fatigue loadings Fatigue Fract Eng Mater Struct 26 2003 1171 1187
37. L. Susmel, R. Tovo, and P. Lazzarin The mean stress effect on the high-cycle fatigue strength from a multiaxial fatigue point of view Int J Fatigue 27 2005 928 943
38. A. Bernasconi, and I.V. Papadopoulos Efficiency of algorithms for shear stress amplitude calculation in critical plane class fatigue criteria Comput Mater Sci 34 2005 355 368
39. K. Fujita, and A. Yoshida Effects of hardness difference on the surface durability and surface failure of steel rollers Wear 67 1981 187 200
40. K. Fujita, and A. Yoshida Effects of case depth and relative radius of curvature on surface durability of case-hardened chromium molybdenum steel roller J Mech Des 103 1981 474 481
41. K. Fujita, and A. Yoshida Energy saving type lubricants and surface durabilities of steel rollers Bull JSME 27 1984 1743 1750
42. K. Fujita, and A. Yoshida Effects of molybdenum disulphide and an organic molybdenum compound in gear oil on rolling contact fatigue Wear 95 1984 271 286
43. Yoshida A, Ohue Y, Fujii M. Effects of drive system lubricant additives upon rolling fatigue of carburized and hardened steel rollers, vol. 24. Memoirs of the Faculty of Engineering, Okayama University; 1989. p. 1-12.
44. A. Yoshida, Y. Ohue, and I. Karasuno Surface failure and durability of induction-hardened sintered powder metal rollers and gears with various hardened depths J Mech Des 116 1994 730 737
45. A. Yoshida, and D. Konishi Study on influences of machining method and surface roughness on pitting of thermally refined steel rollers (part 4): in the case of rollers with axial tool marks mating with cylindrically ground rollers Jpn J Tribol 40 1995 425 436
46. V. Manoj, K. Manohar Shenoy, and K. Gopinath Developmental studies on rolling contact fatigue test rig Wear 264 2008 708 718
47. Carter C. Application of a roller contact test methodology to simulate gear pitting failure. M.S. Thesis, The University of Toledo; 2002.
48. W.J. Wang, W. Zhong, J. Guo, Q.Y. Liu, M.H. Zhu, and Z.R. Zhou Investigation on rolling contact fatigue and wear properties of railway rails J Eng Tribol 223 2009 1033 1039
49. H. Reusner The logarithmic roller profile - the key to superior performance of cylindrical and taper roller bearings Ball Bearing J 230 1987 2 10
50. M.J. Patching, C.C. Kweh, H.P. Evans, and R.W. Snidle Conditions for scuffing failure of ground and superfinished steel disks at high sliding speeds using a gas turbine engine oil J Tribol 117 1995 482 489
51. M.P. Alanou, H.P. Evans, and R.W. Snidle Effects of different surface treatments and coatings on the scuffing performance of hardened steel discs at very high sliding speeds Tribol Int 37 2004 93 102