Comparison of fatigue model results for rough surface elastohydrodynamic lubrication

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Volumn 222, Issue 3, 2008, Pages 381-393

  Qiao, H ^a,b   Evans, H P ^a   Snidle, R W ^a  

^a CARDIFF UNIVERSITY   (United Kingdom)

^b Romax Technology Limited   (United Kingdom)

Author keywords

Rolling contact fatigue; Rough surface elastohydrodynamic lubrication; Surface fatigue

Indexed keywords

CONTACT ANGLE; FATIGUE OF MATERIALS; GEARS; SHEAR STRESS; STRAIN; STRESS CONCENTRATION; SURFACE ROUGHNESS; VISCOSITY;

RAINFLOW COUNTING METHOD; ROLLING CONTACT FATIGUE;

ELASTOHYDRODYNAMIC LUBRICATION;

CONTACT ANGLE; ELASTOHYDRODYNAMIC LUBRICATION; FATIGUE OF MATERIALS; GEARS; SHEAR STRESS; STRAIN; STRESS CONCENTRATION; SURFACE ROUGHNESS; VISCOSITY;

EID: 44949265262     PISSN: 13506501     EISSN: None     Source Type: Journal    
DOI: 10.1243/13506501JET347     Document Type: Conference Paper

References (43)

1. Venner, C. H. and Lubrecht, A. A. Numerical simulation of a transverse ridge in a circular EHL contact under rolling/sliding. Trans. ASME, J. Tribol., 1994, 116, 751-761.
2. Jiang, X., Hua, D. Y., Cheng, H. S., Ai, X., and Lee, S. C. Mixed elastohydrodynamic lubrication model with asperity contact. Trans. ASME, J. Tribol., 1999, 121, 481-491.
3. Chang, L., Webster, M. N., and Jackson, A. On the pressure rippling and roughness deformation in elastohydrodynamic lubrication of rough surfaces. Trans. ASME, J. Tribol., 1993, 115, 439-444.
4. Zhu, D. and Hu, Y.-Z. A computer program package for the prediction of EHL and mixed lubrication characteristics, friction, subsurface stresses and flash temperatures based on measured 3-D surface roughness. Tribol. Trans., 2001, 44, 383-390.
5. Wang, W.-Z., Liu, Y.-C., Wanh, H., and Hu, Y.-Z. A computer thermal model of mixed lubrication in point contacts. Trans. ASME, J. Tribol., 2004, 126, 162-170.
6. Holmes, M. J. A., Hughes, T. G., Evans, H. P., and Snidle, R. W. Ransient elastohydrodynamic point contact analysis using a new coupled differential deflection method. Part 1: theory and validation; Part 2: results. Proc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 2003, 217, 289-321.
7. Holmes, M. J. A., Evans, H. P., and Snidle, R. W. Analysis of mixed lubrication effects in simulated gear tooth contacts. Trans. ASME, J. Tribol., 2005, 127, 61-69.
8. Lundberg, G. and Palmgren, A. Dynamic capacity of rolling bearings. Acta Politech. Mech. Eng. Ser. R. Swedish Acad. Eng, Sci., 1947, 1, 19-47.
9. Lundberg, G. and Palmgren, A. Dynamic capacity of roller bearings. Acta Politech. Mech. Eng, Ser., R. Swedish Acad. Eng. Sci., 1952, 2, 9-50.
10. Ioannides, E. and Harris, T. A. A new fatigue life model for rolling bearings. Trans. ASME, J. Tribol., 1985, 107, 367-378.
11. Zaretsky, E. V. Fatigue criterion to system design, life and reliability. J. Propuls. Power, 1987, 3, 76-83.
12. Coulon, S., Ville, F., and Lubrecht, A. A. Experimental investigations on rolling contact fatigue for dented surfaces using artificial defects. In Proceedings of the 31st Leeds-Lyon Symposium on Tribology, 2005, vol. 48, pp. 691-701 (Elsevier, Amsterdam).
13. Chapkov, A. D., Colin, F., and Lubrecht, A. A. Influence of surface roughness on fatigue life. Proc. IMechE, Part J: J. Engineering Tribology, 2006, 220, 287-294.
14. Kim, T. H. and Olver, A. V. Fatigue and brittle fracture analysis of surface engineered materials in rolling contact. In Proceedings of the 23rd Leeds-Lyon Symposium on Elastohydrodynamics '96, 1997, vol. 32, pp. 37-48 (Elsevier, Amsterdam).
15. Kim, T. H. and Olver, A. V. Stress history in rolling-sliding contact of rough surfaces. Tribol. Int., 1998, 31, 727-736.
16. Epstein, D., Keer, L. M., Wang, Q. J., Cheng, H. S., and Zhu, D. Effect of surface topography on contact fatigue in mixed lubrication. Tribol. Trans., 2003, 46, 506-513.
17. Keer, L. M. and Bryant, M. D. A pitting model for rolling contact fatigue. Trans. ASME, J. Lubr. Tribol., 1983, 105, 198-205.
18. Flašker, J., Fajdiga, G., Glodež, S., and Hellen, T. K. Numerical simulation of surface pitting due to contact loading. Int. J. Fatigue, 2001, 23, 599-605.
19. Kudish, I. I. Lubricant-crack interaction, origin of pitting, and fatigue of drivers and followers. Tribol. Trans., 2002, 45, 583-594.
20. Crossland, B. Effect of large hydrostatic pressures on the torsional fatigue strength of an alloy steel. In Proceedings of the International Conference on Fatigue of Metals, London, The Institution of Mechanical Engineers, 1956, pp. 138-149.
21. Sines, G. Behaviour of metals under complex static and alternating stresses. In Metal fatigue (Eds G. Sines and J. L. Waisman), 1959, pp. 145-169 (McGraw Hill, New York).
22. Papadopoulos, I. V., Davoli, P., Gorla, C., Filippini, M., and Bernasconi, A. A comparative study of multiaxial high-cycle fatigue criteria for metals. Int. J. Fatigue, 1997, 19, 219-235.
23. Palmgren, A. DieLebensdauer von Kugellagern. Z. Ver. Deutsch. Ing., 1924, 68, 339-341.
24. Miner, M. A. Cumulative damage in fatigue. J. Appl. Mech., 1945, 12, 159-164.
25. Downing, N. E. Mechanical behaviour of materials: engineering methods for deformation, fracture and fatigue, 1993 (Prentice Hall, Englewood Cliffs, NJ, USA).
26. Amzallag, C., Gerey, J. P., Robert, J. L., and Bahuaud, J. Standardization of the rainflow counting method for fatigue analysis. Int. J. Fatigue, 1994, 16, 287-293.
27. Holmes, M. J. A., Qiao, H., Evans, H. P., and Snidle, R. W. Transient effects in EHL point and line contacts having rough transverse surface finish. In Proceedings of the 30th Leeds-Lyon Symposium on Tribology, 2004, pp. 201-212 (Elsevier, Amsterdam).
28. Johnson, K. L. Contact mechanics, 1985 (Cambridge University Press, Cambridge, UK).
29. Liu, S., Wang, Q., and Liu, G. A versatile method of discrete convolution and FFT (DC-FFT) for contact analysis. Wear, 2000, 243, 101-111.
30. Qiao, H. Prediction of contact fatigue for the rough surface elastohydrodynamic line contact problem under rolling and sliding conditions. PhD Thesis, Cardiff University, 2005.
31. Findley, W. N. A theory for the effect of mean stress on fatigue of metals under combined torsion and axial load or bending. Trans. ASME, J. Eng. Ind., 1959, 81, 301-306.
32. Matake, T. Explanation of fatigue limit under combined stress. Bull. JSME, 1977, 20, 257-264.
33. Dang Van, K., Cailletaud, G., Flavenot, J. F., Le Douaron, A., and Lieurade, H. P. Criterion for high cycle fatigue failure under multiaxial loading. In Biaxial and multiaxial fatigue, EGF 3 (Eds M. W. Brown and K. J. Miller), 1989, pp. 459-478 (Mechanical Engineering Publications, London).
34. Carpinteri, A. and Spagnoli, A. Multiaxial high-cycle fatigue criterion for hard metals. Int. J. Fatigue, 2001, 23, 135-145.
35. Ekberg, A. Rolling contact fatigue of railway wheels - a parametric study. Wear, 1997, 211, 280-288.
36. Ciavarella, M. and Maitournam, H. On the Ekberg, Kabo and Andersson calculation of the Dang Van high cycle fatigue limit for rolling contact fatigue. Fatigue Fract. Eng. Mater. Struct., 2004, 27, 523-528.
37. Fatemi, A. and Socie, D. F. A critical plane approach to multiaxial fatigue damage including out-of-phase loading. Fatigue Fract. Eng. Mater. Struct., 1988, 11, 149-165.
38. Lubrecht, A. A., Jacobson, B. O., and loannides, E. Lundberg and Palmgren revisited. In Rolling element bearings, towards the 21st Century, October 1990, pp. 17-20 (Institution of Mechanical Engineering, London, UK).
39. Ioannides, E., Jacobson, B., and Tripp, J. H. Prediction of rolling bearing life under practical operating conditions. in Proceedings of the 15th Leeds-Lyon Symposium on Tribology, 1989, pp. 181-187 (Elsevier, Amsterdam)
40. Meeker, W. Q. and Escobar, L. A. Statistical methods for reliability data, 1998 (John Wiley & Sons, New York).
41. Abernethy, R. B. The new Weibull handbook, 2nd edition, 1996 (Published by R. B. Abernethy) (ISBN 0-9653062-0-8).
42. Ayyub, B. M. and McCuen, R. H. Numerical methods for engineers, 1996 (Prentice Hall, New Jersey).
43. Tao, J., Hughes, T. G., Evans, H. P, Snidle, R. W., Hopkinson, N. A., Talks, M., and Starbuck, J. M. Elasto-hydrodynamic lubrication analysis of gear tooth surfaces from micropitting tests. Trans. ASME, J. Tribol., 2003, 125, 267-274.