The effect of Electro Discharge Machining (EDM) on the corrosion resistance of dental alloys

Dental Materials

Volumn 26, Issue 12, 2010, Pages

  Ntasi, Argyro ^a   Mueller, Wolf Dieter ^b   Eliades, George ^a   Zinelis, Spiros ^a  

^a UNIVERSITY OF ATHENS   (Greece)

^b CHARITÉ UNIVERSITÄTSMEDIZIN BERLIN   (Germany)

Author keywords

Corrosion; Dental alloys; Electro Discharge Machining (EDM); X ray EDS

Indexed keywords

BEFORE AND AFTER; BIOLOGICAL REACTION; CORROSION TESTING; CU ELECTRODE; ELECTRO DISCHARGE MACHINING; ELECTROCHEMICAL TESTING; MORPHOLOGICAL ALTERATION; POLARIZATION RESISTANCES; RINGER'S SOLUTION; SEM ANALYSIS; SEM/EDX; X-RAY EDS;

CERIUM ALLOYS; CHROMIUM; COPPER ALLOYS; CORROSION RESISTANCE; DENTAL PROSTHESES; ELECTRIC DISCHARGES; MACHINING; POLARIZATION; SURFACE TESTING;

DENTAL ALLOYS;

BIOMEDICAL AND DENTAL MATERIALS; CHROMIUM DERIVATIVE; COBALT; COPPER; DENTAL ALLOY; TITANIUM;

ARTICLE; CHEMISTRY; CORROSION; DENTURE; ELECTROCHEMICAL ANALYSIS; ELECTRODE; EVALUATION; MATERIALS TESTING; METHODOLOGY; SCANNING ELECTRON MICROSCOPY; SPECTROMETRY; SURFACE PROPERTY; TOOTH BRUSHING; TOOTH CROWN;

CHROMIUM ALLOYS; COBALT; COPPER; CORROSION; CROWNS; DENTAL ALLOYS; DENTAL CASTING INVESTMENT; DENTAL CASTING TECHNIQUE; DENTAL POLISHING; ELECTROCHEMICAL TECHNIQUES; ELECTRODES; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING; SPECTROMETRY, X-RAY EMISSION; SURFACE PROPERTIES; TITANIUM;

EID: 78049335740     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2010.08.001     Document Type: Article

References (23)

1. G. Rubeling Electroerosion in dental technology. Possibilities and limits Dent Labor (Munch) 30 1982 1697 1702
2. G.G. Romero, R. Engelmeier, J.M. Powers, and A.A. Canterbury Accuracy of three corrective techniques for implant bar fabrication J Prosthet Dent 84 2000 602 607
3. E.F. Contreras, G.E. Henriques, S.R. Giolo, and M.A. Nobilo Fit of cast commercially pure titanium and Ti-6Al-4V alloy crowns before and after marginal refinement by electrical discharge machining J Prosthet Dent 88 2002 467 472
4. I.A. Sartori, R.F. Ribeiro, C.E. Francischone, and M. da G. de Mattos In vitro comparative analysis of the fit of gold alloy or commercially pure titanium implant-supported prostheses before and after electroerosion J Prosthet Dent 92 2004 132 138
5. E. Eisenmann, A. Mokabberi, M.H. Walter, and W.B. Freesmeyer Improving the fit of implant-supported superstructures using the spark erosion technique Int J Oral Maxillofac Implants 19 2004 810 818
6. A.D. Linehan, and A.S. Windeler Passive fit of implant-retained prosthetic superstructures improved by electric discharge machining J Prosthodont 3 1994 88 95
7. G.A. Zarb, and J.M. Symington Osseointegrated dental implants: preliminary report on a replication study J Prosthet Dent 50 1983 271 276
8. A.D. Sones Complications with osseointegrated implants J Prosthet Dent 62 1989 581 585
9. R. Skalak Biomechanical considerations in osseointegrated prostheses J Prosthet Dent 49 1983 843 848
10. N.B. Van Roekel Electrical discharge machining in dentistry Int J Prosthodont 5 1992 114 121
11. G.E. Benedict Nontraditional manufacturing processes 1987 Marcel Dekker
12. W.J. Weller Nontraditional machining processes 1984 Society of Manufacturing Engineers
13. S. Zinelis Surface and elemental alterations of dental alloys induced by electro discharge machining (EDM) Dent Mater 23 2007 601 607
14. M.L. Nascimento, W.D. Mueller, A.C. Carvalho, and H. Tomas Electrochemical characterization of cobalt-based alloys using the mini-cell system Dent Mater 23 2007 369 373
15. G. Cusanelli, A. Hessler-Wyser, F. Bobard, R. Demellayer, R. Perez, and R. Flukiger Microstructure at submicron scale of the white layer produced by EDM technique J Mater Process Technol 149 2004 289 295
16. S. Kumar, R. Singh, T.P. Singh, and B.L. Sethi Surface modification by electrical discharge machining: a review J Mater Process Technol 209 2009 3675 3687
17. T. Papadopoulos, S. Zinelis, and M. Vardavoulias A metallurgical study of the contamination zone at the surface of dental Ti castings, due to the phosphate-bonded investment material: the protection efficacy of a ceramic coating J Mater Sci 34 1999 3639 3646
18. M. Syverud, T. Okabe, and H. Hero Casting of Ti-6Al-4V alloy compared with pure Ti in an Ar-Arc casting machine Eur J Oral Sci 103 1995 327 330
19. S. Zinelis, A. Thomas, and N. Silikas XPS analysis of Ti surface after spark erosion 42nd International Association of Dental Research Thessaloniki 2007
20. Z.L. Wang, Y. Fang, P.N. Wu, W.S. Zhao, and K. Cheng Surface modification process by electrical discharge machining with a Ti powder green compact electrode J Mater Process Technol 129 2002 139 142
21. K.W. Boening, M.H. Walter, and P.D. Reppel Non-cast titanium restorations in fixed prosthodontics J Oral Rehabil 19 1992 281 287
22. M. Andersson, B. Bergman, C. Bessing, G. Ericson, P. Lundquist, and H. Nilson Clinical results with titanium crowns fabricated with machine duplication and spark erosion Acta Odontol Scand 47 1989 279 286
23. S. Karlsson The fit of Procera titanium crowns. An in vitro and clinical study Acta Odontol Scand 51 1993 129 134