Stability problems of steel-concrete members composed of high-strength materials

Journal of Civil Engineering and Management

Volumn 16, Issue 3, 2010, Pages 352-362

  Kala, Zdeněk ^a   Puklický, Libor ^a   Omishore, Abayomi ^a   Karmazínová, Marcela ^a   Melcher, Jindrich ^a  

^a BRNO UNIVERSITY OF TECHNOLOGY   (Czech Republic)

Author keywords

Concrete; Failure; Imperfections; Material; Random; Reliability; Steel; Structure

Indexed keywords

COMPUTER SYSTEM RECOVERY; CONCRETES; DEFECTS; HIGH PERFORMANCE CONCRETE; LOAD LIMITS; LOADS (FORCES); MATERIALS; MONTE CARLO METHODS; NUMERICAL METHODS; RELIABILITY; STEEL; STOCHASTIC SYSTEMS; STRUCTURE (COMPOSITION); STRUTS;

EXPERIMENTAL RESEARCH; HIGH STRENGTH CONCRETES; HIGH-STRENGTH MATERIALS; INITIAL GEOMETRIC IMPERFECTION; MATERIAL AND GEOMETRICAL IMPERFECTIONS; RANDOM; STATISTICAL CHARACTERISTICS; ULTIMATE LIMIT STATE;

HIGH STRENGTH STEEL;

EID: 77958086597     PISSN: 13923730     EISSN: 18223605     Source Type: Journal    
DOI: 10.3846/jcem.2010.40     Document Type: Article

References (46)

1. Amšiejus, J., Dirgeliene, N., Norkus, A., and Žilioniene, D., 2009. Evaluation of soil shear strength parameters via triaxial testing by height versus diameter ratio of sample. The Baltic Journal of Road and Bridge Engineering, 4(2):54–60. doi:10.3846/1822–427X.2009.4.54–60
2. Atkočiūnas, J., Norkus, A., and Rimkus, L., 1997. Distortion in mechanics of elastic and elastic-plastic frames. Computers & Structures, 62(5):861–864. doi:10.1016/S0045–7949(96)00320–3
3. Atkočiūnas, J., Merkevičiūte, D., and Venskus, A., 2008. Optimal shakedown design of bar systems:Strength, stiffness, and stability constraints. Computers and Structures, 86(17–18):1757–1768. doi:10.1016/j.compstruc.2008.01.008
4. Fukumoto, Y., Kajita, N., and Aoki, T., Evaluation of column curves based on probabilistic concept. Proc. of Int. Conference on Stability. pp. 1–37. Kai, Tokyo:Prelim. Rep., publ. by Gakujutsu Bunken Fukyu.
5. Fukumoto, Y., 1997. Structural Stability Design, Steel and Composite Structures, Elsevier Science.
6. Frangopol, D. M., Strauss, A., and Kim, S., 2008. Use of monitoring extreme data for the performance prediction of structures:general approach. Engineering Structures, 30(12):3644–3653. doi:10.1016/j.engstruct.2008.06.010
7. Gailius, A., and Kinuthia, J., 2009. Modern building materials and their investigation methods. Journal of Civil Engineering and Management, 15(2):129–130. doi:10.3846/1392–3730.2009.15.129–130
8. Gribniak, V., Kaklauskas, G., and Bačinskas, D., 2007. State-of-art review on shrinkage effect on cracking and deformations of concrete bridge elements. The Baltic Journal of Road and Bridge Engineering, 2(4):183–193.
9. Gribniak, V., Kaklauskas, G., and Bacinskas, D., 2008. Shrinkage in reinforced concrete structures:a computational aspect. Journal of Civil Engineering and Management, 14(1):49–60. doi:10.3846/1392–3730.2008.14.49–60
10. Gribniak, V., Kaklauskas, G., Idnurm, S., and Bačinskas, D., 2010. Finite element mesh size effect on deformation predictions of reinforced concrete bridge girder. The Baltic Journal of Road and Bridge Engineering, 5(1):19–27. doi:10.3846/bjrbe.2010.03
11. Gocál, J., Vičan, J., Hlinka, R., and Jošt, J., 2010. Laboratory tests of a typical fatigue prone riveted steel railway bridge structural detail. Procedia Engineering, 2(1):1761–1766. doi:10.1016/j.proeng.2010.03.189
12. Juozapaitis, A., Vainiunas, P., and Kaklauskas, G., 2006. A new steel structural system of a suspension pedestrian bridge. Journal of Constructional Steel Research, 62(12):1257–1263. doi:10.1016/j.jcsr.2006.04.023
13. Iman, R. C., and Conover, W. J., 1980. Small sample sensitivity analysis techniques for computer models with an application to risk assessment. Communications in Statistics - Theory and Methods, 9(17):1749–842. doi:10.1080/03610928008827996
14. Jankovski, V., and Atkočiūnas, J., 2010. SAOSYS Toolbox as MATLAB Implementation in the Elastic-Plastic Analysis and Optimal Design of Steel Frame Structures. Journal of Civil Engineering and Management, 16(1):103–121. doi:10.3846/jcem.2010.10
15. Juozapaitis, A., and Norkus, A., 2007. Determination of rational parameters for the advanced structure of a pedestrian suspension steel bridge. The Baltic Journal of Road and Bridge Engineering, 2(4):173–181.
16. Juozapaitis, A., Norkus, A., and Vainiunas, P., 2008. Shape stabilization of steel suspension bridge. The Baltic Journal of Road and Bridge Engineering, 3(3):137–144. doi:10.3846/1822–427X.2008.3.137–144
17. Juozapaitis, A., Idnurm, S., Kaklauskas, G., Idnurm, J., and Gribniak, V., 2010. Non-linear analysis of suspension bridges with flexible and rigid cables. Journal of Civil Engineering and Management, 16(1):149–154. doi:10.3846/jcem.2010.14
18. Kaklauskas, G., Girdžius, R., Bačinskas, D., and Sokolov, A., 2008. Numerical deformation analysis of bridge concrete girders. The Baltic Journal of Road and Bridge Engineering, 3(2):51–56. doi:10.3846/1822–427X.2008.3.51–56
19. Kaklauskas, G., Gribniak, V., Bacinskas, D., and Vainiunas, P., 2009. Shrinkage influence on tension stiffening in concrete members. Engineering Structures, 31(6):1305–1312. doi:10.1016/j.engstruct.2008.10.007
20. Kala, Z., 2005. Sensitivity analysis of the stability problems of thin-walled structures. Journal of Constructional Steel Research, 61(3):415–422. doi:10.1016/j.jcsr.2004.08.005
21. Kala, Z., 2007. Stability problems of steel structures in the presence of stochastic and fuzzy uncertainty. Journal of Thin-Walled Structures, 45(10–11):861–865. doi:10.1016/j.tws.2007.08.007
22. Kala, Z., 2008. Fuzzy probability analysis of the fatigue resistance of steel structural members under bending. Journal of Civil Engineering and Management, 14(1):67–72. doi:10.3846/1392–3730.2008.14.67–72
23. Kala, Z., 2009. Sensitivity assessment of steel members under compression. Engineering Structures, 31(6):1344–1348. doi:10.1016/j.engstruct.2008.04.001
24. Kala, Z., and Kala, J., 2009. Sensitivity analysis of stability problems of steel structures using shell finite elements and nonlinear computation methods. WSEAS Transactions on Applied and Theoretical Mechanics, 4(3):105–114. ISSN 1991–8747
25. Kala, Z., Melcher, J., and Puklický, L., 2009. Material and geometrical characteristics of structural steels based on statistical analysis of metallurgical products. Journal of Civil Engineering and Management, 15(3):299–307. doi:10.3846/1392–3730.2009.15.299–307
26. Karmazínová, M., Melcher, J., and Röder, V., Load carrying capacity of steel concrete compression member of high-strength materials. Proc. of Int. 9th Conf. Steel Concrete Composite and Hybrid Structures. Leeds, (UK). pp. 239–244.
27. Karmazínová, M., Melcher, J., and Kala, Z., 2009b. Design of expansion anchors to concrete based on results of experimental verification. Advanced Steel Construction, 5(4):390–405.
28. Kinuthia, J., Snelson, D., and Gailius, A., 2009. Sustainable medium-strength concrete (CS-concrete) from colliery spoil in South Wales UK. Journal of Civil Engineering and Management, 15(2):149–157. doi:10.3846/1392–3730.2009.15.149–157
29. Kotelko, M., Kowal-Michalska, K., Kubiak, T., Kolakowski, Z., and Gradzki, R., 2008. Estimation of load carrying capacity of multi-layered plated structures. Thin-walled Structures, 46(7–9):1003–1010. doi:10.1016/j.tws.2008.01.037
30. Mang, H. A., 2009. On contemporary computational mechanics. Journal of Civil Engineering and Management, 15(1):113–128. doi:10.3846/1392–3730.2009.15.113–128
31. Mang, H. A., Eberhardsteiner, J., Hellmich, C., Hofstetter, K., Jäger, A., Lackner, R., Meinhard, K., Müllner, H. W., Pichler, B., Pichler, C., Reihsner, R., Stürzenbecher, R., and Zeiml, M., 2009. Computational mechanics of materials and structures. Engineering Structures, 31(6):1288–1297. doi:10.1016/j.engstruct.2009.01.005
32. McKey, M. D., Conover, W. J., and Beckman, R. J., 1979. A comparison of the three methods of selecting values of input variables in the analysis of output from a computer code. Technometrics, 21(2):239–245. doi:10.2307/1268522
33. Melcher, J., Kala, Z., Holický, M., Fajkus, M., and Rozlívka, L., 2004. Design characteristics of structural steels based on statistical analysis of metallurgical products. Journal of Constructional Steel Research, 60(3–5):795–808. doi:10.1016/S0143–974X(03)00144–5
34. Melcher, J., Škaloud, M., Kala, Z., and Karmazínová, M., 2009. Sensitivity and statistical analysis within the elaboration of steel plated girder resistance. Advanced Steel Construction, 5(2):120–126. ISSN 1816–112X
35. Merkevičiūte, D., and Atkočiūnas, J., 2006. Optimal shakedown design of metal structures under stiffness and stability constraints. Journal of Constructional Steel Research, 62(12):1270–1275. doi:10.1016/j.jcsr.2006.04.020
36. Park, M., Chu, Y., Lee, H.-S., and Kim, W., 2009. Evaluation Methods for Construction Projects. Journal of Civil Engineering and Management, 15(4):349–359. doi:10.3846/1392–3730.2009.15.349–359
37. Puklický, L., and Kala, Z., Application of fuzzy analysis to stability problems of steel-concrete structural members. Proc. of the 2nd WSEAS Int. Conf. on Engineering Mechanics, Structures and Engineering Geology (EMESEG ‘09). 2009, Rodos Island, (Greece). July. pp. 111–113. 22–24. WSEAS Press.
38. Puklický, L., and Kala, Z., 2009b. Application of uncertainty analysis to stability problems of steel-concrete structural members. Engineering Structures and Technologies, 1(1):44–49. doi:10.3846/skt.2009.05
39. Sedlacek, G., and Müller, Ch., 16 November 2007. Report for CEN/TC250/SC3 Geometrical tolerances in EN 1090–2 for long products used as columns in compression 16 November, 9 2007
40. Šešok, D., Mockus, J., Belevičius, R., and Kačeniauskas, A., 2010. Global optimization of grillages using simulated annealing and high performance computing. Journal of Civil Engineering and Management, 16(1):95–101. doi:10.3846/jcem.2010.09
41. Strauss, A., Kala, Z., Bergmeister, K., Hoffmann, S., and Novák, D., 2006. Technologische Eigenschaften von Stählen im europäischen Vergleich. Stahlbau, 75 Januar 2006, Heft 1
42. Strauss, A., Frangopol, D. M., and Kim, S., 2008. Use of monitoring extreme data for the performance prediction of structures:general approach. Engineering Structures, 30(12):3654–3666. doi:10.1016/j.engstruct.2008.06.009
43. Szwabowski, J., and Lazniewska-Piekarczyk, B., 2009. Air-entrainment problem in self-compacting concrete. Journal of Civil Engineering and Management, 15(2):137–147. doi:10.3846/1392–3730.2009.15.137–147
44. Timoshenko, S., and Gere, J., 1961. Theory of Elastic Stability, New York:McGraw-Hill.
45. Ungureanu, V., Kotełko, M., Mania, R. J., and Dubina, D., 2010. Plastic mechanisms database for thin-walled cold-formed steel members in compression and bending. Thin-Walled Structures, 48(10–11):818–826. doi:10.1016/j.tws.2010.01.004
46. EN 1994–1–1:2004. Eurocode 4:Design of composite steel and concrete structures - Part 1–1:General rules and rules for buildings.