Computer simulation of a 1.0 GPa piston-cylinder assembly using finite element analysis (FEA)

Measurement: Journal of the International Measurement Confederation

Volumn 43, Issue 10, 2010, Pages 1345-1354

  Dogra, Sugandha ^a   Yadav, Sanjay ^a   Bandyopadhyay, A K ^a  

^a NATIONAL PHYSICAL LABORATORY   (India)

Author keywords

Fall rates; Finite element analysis; Pressure balance; Pressure metrology

Indexed keywords

APPLIED PRESSURE; CONTROLLED-CLEARANCE PISTON GAUGE; DISTORTION COEFFICIENTS; EFFECTIVE AREA; ELEMENTAL ANALYSIS; EXPERIMENTAL CHARACTERIZATION; FALL RATES; FINITE ELEMENT ANALYSIS; GAP PROFILES; INPUT PARAMETER; JACKET PRESSURES; LINEAR EXTRAPOLATION; MATERIAL PROPERTY; PISTON-CYLINDER ASSEMBLY; PRESSURE BALANCE; PRESSURE DEPENDENT; PRESSURE DISTORTION COEFFICIENTS; PRESSURE RANGES; RHEOLOGICAL PROPERTY; SIMULATION AND OPTIMIZATION; SYSTEMATIC STUDY;

COMPUTER SIMULATION; CYLINDERS (SHAPES); FINITE ELEMENT METHOD; GAGES; PRECISION BALANCES; PRESSURE MEASUREMENT; RHEOLOGY;

PRESSURE EFFECTS;

EID: 77957846981     PISSN: 02632241     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.measurement.2010.07.010     Document Type: Article

References (31)

1. Sanjay Yadav, O. Prakash, V.K. Gupta, and A.K. Bandyopadhyay The effect of pressure transmitting fluids in the characterization of a controlled clearance piston gauge up to 1 GPa Metrologia 44 2007 222 233
2. R.S. Dadson, R.G.P. Greig, and A. Horner Development in accurate measurement of high pressures Metrologia 1 1965 55 67
3. P.L.M. Heydemann, and W.E. Welch Piston gauges B. Leneindre, B. Voder, Experimental Thermodynamics vol. 2 1975 Butterworth London 147
4. R.S. Dadson, S.L. Lewis, and G.N. Peggs The Pressure Balance: Theory and Practice 1982 Her Majesty's Stationery Office London
5. F. Pavese, and G.F. Molinar Modern Gas based Temperature and Pressure Measurements 1994 Plenum New York
6. G.F. Molinar, R. Maghenzani, P.C. Cresto, and L. Bianchi Elastic distortions in piston cylinder unit at pressures up to 0.5 GPa Metrologia 29 1992 425 440
7. J.C. Legras Pressure distortion coefficient of pressure balances A.K. Bandyopadhyay, Advances in High Pressure Science and Technology 2001 NPL New Delhi 9 14
8. D.H. Newhall, I. Ogawa, and V. Zilberstein Recent studies of float and stall curves in controlled clearance dead weight testers with a simple piston Rev. Sci. Instrum. 50 1979 964 968
9. J.K.N. Sharma, K.K. Jain, V.E. Bean, B.E. Welch, and R.J. Lazos Effects of viscosity, temperature, and rate of rotation on pressure generated by a controlled clearance piston gauge Rev. Sci. Instrum. 56 4 1984 563 569
10. A.K. Bandyopadhyay, P. Hilsch, and J. Jager Use of controlled clearance balances with highly viscous pressure transmitting media PTB-Mitteilungen 97 1987 264 269
11. H. Kajikawa, K. Ide, and T. Kobata Precise determination of the pressure distortion coefficient of new controlled clearance piston-cylinders based on the Heydemann-Welch model Rev. Sci. Instrum. 80 5 2009 095101 095110
12. J.K.N. Sharma, K.K. Jain, and A.K. Bandyopadhyay Characterization of a controlled clearance piston gauge using different working fluids up to 5 MPa Jpn. J. Appl. Phys. 27 1988 843 848
13. A.K. Bandyopadhyay, and A.C. Gupta Realization of a national practical pressure scale for pressures up to 500 MPa Metrologia 36 1999 681 688
14. Sanjay Yadav, V.K. Gupta, A.K. Bandyopadhyay, Characterisation of controlled clearance pressure balance for hydrostatic pressure measurements up to 500 MPa, in: Proc. NSCL Conf., Tampa, FL, 17-18 August 2003, pp 1-16.
15. A.K. Bandyopadhyay, S. Yadav, and N. Dilawar Current status of pressure standards at NPLI and our experiences with the key comparison data base (KCDB) MAPAN - J. Metrology Soc. India 21 2006 127 145
16. D.H. Newhall, W.C. Newhall, and T. Malloy Revised characterisation of the controlled clearance piston gauge Rev. Sci. Instrum. 74 5 2003 2899 2910
17. A.K. Bandyopadhyay, and D.A. Olson Characterization of a compact 200 MPa controlled clearance piston gauge as a primary pressure standard using the Heydemann and Welch method Metrologia 43 2006 1 10
18. N.D. Samaan, Mathematical Modeling of Instruments for Pressure Measurement, Ph.D. Thesis, City University, London, UK, 1990, p.145.
19. N.D. Samaan, and F. Abdullah Characterisation of a 1 GPa piston-cylinder unit Measurement 23 1998 179 183
20. W. Sabuga, Elastic distortion calculations at PTB on LNE 200 MPa pressure balance as part of EUROMET Project 256, PTB Bericht, Braunschweig, PTB-W-63, 1995.
21. G.F. Molinar, W. Sabuga, G. Robinson, and J.C. Legras Comparison of methods for calculating distortion in pressure balances up to 400 MPa - EUROMET Project 256 Metrologia 35 1998 739 759
22. G. Buonanno, M. Dell'Isola, and R. Maghenzani Finite elements analysis of pressure distortion coefficient and piston fall rate in a simple pressure balance Metrologia 36 1999 579 584
23. G. Buonanno, M. Dell'Isola, G. Lagulli, and G.F. Molinar A finite element method to evaluate the pressure distortion coefficient in pressure balances High Temp.-High Press. 31 1999 131 143
24. 0 for six piston-cylinder assemblies of pressure balances. Results of the EUROMET Project 740 Metrologia 42 2005 S197 S201
25. G. Molinar, G. Buonanno, G. Giovinco, P. Delajoud, and R. Haines Effectiveness of finite element calculation method (FEM) on high performance pressure balances in liquid media up to 200 MPa Metrologia 42 2005 S207 S211
26. W. Sabuga, G. Molinar, G. Buonanno, T. Esward, T. Rabault, and L. Yagmur Calculation of the distortion coefficient and associated uncertainty of PTB and LNE 1 GPa pressure balances using finite element analysis - EUROMET Project 463 Metrologia 42 2005 S202 S206
27. W. Sabuga, G. Molinar, G. Buonanno, T. Esward, J.C. Legras, and L. Yagmur Finite element method used for calculation of the distortion coefficient and associated uncertainty of a PTB 1 GPa pressure balance - EUROMET Project 463 Metrologia 43 2006 311 325
28. Sanjay Yadav, A. Lodh, S. Dogra, A.K. Bandyopadhyay, Characterisation of a controlled clearance piston gauge (CCPG) using finite element analysis, in: Proceedings 7th International Conference on Advances in Metrology (AdMet-2009), New Delhi, February 18-20, 2009, pp. 114-115.
29. G.F. Molinar, Density and dynamic viscosity versus pressure, up to 1 GPa, for the di(2)-ethyl-hexyl-sebacate fluid at 20 °C - EUROMET Project Number 463, Rapporto Tecnico Interno R 486 CNR-IMGC, Torino, December 1998.
30. P. Vergne New high pressure viscosity measurements on di(2-ethylhexyl) sebacate and comparison with previous data High Temp.-High Press. 22 1990 613 621
31. Viscosity and density of over 40 lubricating fluids of known composition at pressures to 150000 psi and temperatures to 425 F. ASME Report. New York: American Society of Mechanical Engineers; 1953.