Comparison of methods for calculating distortion in pressure balances up to 400 MPa -EUROMET Project #256

Metrologia

Volumn 35, Issue 5, 1998, Pages 739-759

  Molinar, G ^a   Sabuga, W ^b   Robinson, G ^c   Legras, J C ^d  

^a Istituto di Metrologia Gustavo Colonnetti   (Italy)

^b PHYSIKALISCH TECHNISCHE BUNDESANSTALT   (Germany)

^c NATIONAL PHYSICAL LABORATORY   (United Kingdom)

^d LABORATOIRE NATIONAL DE MÉTROLOGIE ET D ESSAIS LNE   (France)

Author keywords

[No Author keywords available]

Indexed keywords

ELASTIC DEFORMATION; PRESSURE BALANCES;

BOUNDARY CONDITIONS; DEFORMATION; ELASTICITY; ENGINE CYLINDERS; FINITE ELEMENT METHOD; MATHEMATICAL MODELS; PISTONS; PRESSURE DISTRIBUTION;

PRESSURE MEASUREMENT;

EID: 0032280054     PISSN: 00261394     EISSN: None     Source Type: Journal    
DOI: 10.1088/0026-1394/35/5/5     Document Type: Review

References (30)

1. Molinar G. F., Cresto P. C., Maghenzani R., Elastic distortions in a piston-cylinder unit for pressure measurements in liquids to 100 MPa: preliminary results, BIPM Monographie 89/1, 1989, 12-21.
2. Molinar G. F., Maghenzani R., Cresto P. C., Bianchi L., Elastic Distortions in Piston-Cylinder Units at Pressures up to 0,5 GPa, Metrologia, 1992, 29, 425-440.
3. Samaan N. D., Mathematical modelling of instruments for pressure measurement, Ph.D. thesis, City University, London, 1990, 145 p.
4. Stuart P. R., The influence of fluid viscosity on the distortion of piston-cylinder assemblies in pressure balances, BIPM Monographie 89/1, 1989, 31-40.
5. Molinar G. F., Cresto P. C., Elastic distortion calculations at IMGC on the BNM-LNE 200 MPa pressure balance (free-deformation type) as a part of the agreed EUROMET Project 256, IMGC Internal Report 369, Turin, Istituto di Metrologia "G. Colonnetti", January 1994.
6. Molinar G. F., personal communication to P. Clow (NPL) and J C Legras (BNM-LNE), Results on BNM-LNE 200 MPa system #4 in simple and controlled-clearance mode, Turin, Istituto di Metrologia "G. Colonnetti", July 1994.
7. Molinar G. F., Elastic distortion calculations at IMGC on the PTB 400 MPa pressure balance (free-deformation type) as a part of EUROMET Project 256, IMGC Internal Report R388, Turin, Istituto di Metrologia "G. Colonnetti", December 1994.
8. Clow P., Elastic distortion calculation at NPL on a PTB 400 MPa pressure balance as a part of EUROMET Project 256, NPL Report MOM 117, Teddington, National Physical Laboratory, July 1994.
9. Clow P., Elastic distortion calculation at NPL on a BNM-LNE 200 MPa pressure balance as part of EUROMET Project 256, NPL Report MOM 120, Teddington, National Physical Laboratory, December 1994.
10. Robinson G. M., Second NPL analysis of the distortion of pressure balances as part of EUROMET Project 256, NPL Report MOT6, Teddington, National Physical Laboratory, July 1996.
11. Sabuga W., Elastic distortion calculations at PTB on a PTB 400 MPa pressure balance as part of EUROMET Project 256, PTB-Bericht W-60, Braunschweig, Physikalisch-Technische Bundesanstalt, March 1995.
12. Sabuga W., Elastic distortion calculations at PTB on BNM-LNE 200 MPa pressure balances as part of EUROMET Project 256, PTB-Bericht W-63, Braunschweig, Physikalisch-Technische Bundesanstalt, November 1995.
13. Jäger J., Ein Neues Normalgerät für den Druckmessbereich bis 10 kbar, PTB Jahresbericht, 1992, 181.
14. Jäger J., Schoppa G., Schultz W., The standard instruments of the PTB for the 1 GPa range of pressure measurement, PTB-Bericht W-66, Braunschweig, Physikalisch-Technische Bundesanstalt, October 1996.
15. Vergne P., New high-pressure viscosity measurements on di(2-ethylhexyl) sebacate and comparisons with previous data, High Temp.-High Press., 1990, 22, 613-621.
16. Bastam D., Reimann H., Lüdicke F., Bosse H., Elligsen R., Kalibrierung eines Hochdrucknormals, PTB Jahresbericht, 1994, 224-225.
17. Legras J. C., Huot A., Delajoud P., La référence nationale de pression du BNM dans le domaine de 5 à 200 MPa, Bull. Bureau Nationale de Métrologie, 1982, 48, 9-33.
18. Legras J. C., Piston gage used as high accuracy standard in the range 0,01 to 1000 MPa, BIPM Monographie 1989/1, 41-52.
19. Legras J. C., Molinar G. F., Final Results of an International Comparison in the Pressure Range 20 MPa to 100 MPa, Metrologia, 1991, 28, 419-424.
20. Robinson G. M., A single iteration loop finite element algorithm for calculation of the distortion coefficient of pressure balances, NPL Report MAMX, Teddington, National Physical Laboratory, August 1997.
21. Dadson R. S., Lewis S. L., Peggs G. N., The pressure balance: theory and practice, London, HMSO, 1982, 290 p.
22. ANSYS, User's manual for revision 5.0, Vol. I-IV, DN-R300:50, Swanson Analysis System, Inc., 201 Johnson Road, Houston, Texas.
23. Robinson G. M., Finite element prediction of the distortion coefficients of pressure balances, XIV IMEKO World Congress, Tampere, Finland, 1-6 June 1997.
24. Roelands C. J. A., Correlational aspects of the viscosity-temperature-pressure relationship of lubricating oils, Ph.D. thesis, University of Delft, the Netherlands, 1966.
25. Dadson R. S., Greig R. G. P., Horner A., Developments in the accurate measurement of high pressures, Metrologia, 1965, 1, 55-67.
26. Sabuga W., Jäger J., Einfluss der Spaltform eines 4-kbar-Kolbenzylindersystems auf die Sinkgeschwindigkeit, PTB Jahresberich, 1994, 199.
27. Heydemann P. L. M., Welch B. E., Piston gages, In Experimental thermodynamics, Vol. II: Experimental thermodynamics of non-reacting fluids (Edited by B. LeNeindre and B. Vodar), London, Butterworths, 1975, Chapter 4, Part 3, 147-202.
28. Mooney M., A theory of large elastic deformations, J. Appl. Phys., 1940, 11, 582-592.
29. Seals, wear-rings, Handbook, Busak & Luyken, 4th ed., 1988/89.
30. ANSYS, Examples supplement for revision 5.0 A, DN-G201:50A, Swanson Analysis Systems, Inc., 201 Johnson Road, Houston, Texas.