AlTiN and AlTiON-coated hot work tool steels for tooling in steel thixoforming

Transactions of Nonferrous Metals Society of China (English Edition)

Volumn 20, Issue SUPPL. 3, 2010, Pages

  Birol, Y ^a   Isler, D ^b  

^a MATERIALS INSTITUTE   (Turkey)

^b ISTANBUL TECHNICAL UNIVERSITY   (Turkey)

Author keywords

coating; physical vapor deposition; steels; thermal fatigue; thixoforming; tooling; wear

Indexed keywords

CAVITY SURFACES; DEPOSITION PROCESS; HIGH TEMPERATURE WEAR RESISTANCE; HOT-WORK TOOL STEEL; RESIDUAL COMPRESSIVE STRESS; SLIDING WEAR TESTS; STEEL SUBSTRATE; SURFACE OXIDE FILMS; THERMAL EXPANSION MISMATCH; THERMAL FATIGUE CRACKING; THIXOFORMING; TOOLING; WEAR;

HOT WORKING; IMPACT RESISTANCE; OXIDE FILMS; PHYSICAL VAPOR DEPOSITION; PROTECTIVE COATINGS; THERMAL EXPANSION; THERMAL FATIGUE; TOOL STEEL;

WEAR RESISTANCE;

EID: 77957276507     PISSN: 10036326     EISSN: None     Source Type: Journal    
DOI: 10.1016/S1003-6326(10)60624-3     Document Type: Article

References (49)

1. S MUENSTARMAN, K UIBEL, T TONNESEN, R TELLE Development of a self-heating ceramic tool for the thixoextrusion of high melting point alloys [J] Solid State Phenomena 116/117 2006 696 699
2. E LUGSCHEIDER, K BOBZIN, C BARIMANI, St BARWULF, Th HORNIG PVD hard coatings protecting the surface of thixoforming tools [J] Adv Eng Mater 2 2000 33 37
3. Y BIROL Thermal fatigue testing of Inconel 617 and Stellite 6 alloys as tooling materials for thixoforming of steels [J] Mater Sci Eng A 527 2010 1938 1945
4. Y BIROL Response to thermal cycling of tool materials under steel thixoforming conditions [J] Ironmak Steelmak 37 2010 41 46
5. MZ OMAR, EJ PALMIERE, AA HOWE, HV ATKINSON, P KAPRANOS Thixoforming of a high performance HP9/4/30 steel [J] Mater Sci Eng A 395 2005 53 61
6. R TELLE, S MUENSTERMANN, C BEYER Design, construction and performance of silicon nitride tool parts in steel thixoforming [J] Solid State Phenomena 116/117 2006 690 695
7. Y BIROL A CrNiCo alloy as a potential tool material in semi-solid Processing of Steels [J] Steel Res Int 80 2009 165 171
8. Y BIROL Thermal fatigue testing of tooling materials for semi-solid processing of steels [J] Steel Res Int 80 2009 588 592
9. Y BIROL Ni-based superalloy as a potential tool material for thixoforming of steels [J] Ironmak Steelmak 36 2009 555 560
10. P KAPRANOS, DH KIRKWOOD, CM SELLARS Semi-solid processing of aluminium and high melting point alloys [J] J Eng Manuf 207B 1993 1 8
11. Y BIROL The use of CrNiCo-based superalloy as die material in semi-solid processing of steels [J] Solid State Phenomena 141/142/143 2008 289 294
12. FL RILEY Silicon nitride and related materials [J] Journal of the American Ceramic Society 83 2000 245 265
13. Y BIROL Effect of bulk die temperature on die cavity surface strains in thixoforming of steels [J] Ironmak Steelmak 36 2009 397 400
14. Y BIROL Response to thermal cycling of tool materials under steel thixoforming conditions [J] Ironmak Steelmak 37 2010 41 46
15. Y BIROL Testing of a novel CrNiCo alloy for tooling applications in semi-solid processing of steels [J] Int J Mater Form 3 2010 65 70
16. LA DOBRZANSKI, M POLOK, M ADAMIAK Structure and properties of wear resistance PVD coatings deposited onto X37CrMoV5-1 type hot work steel [J] J Mater Process Tech 164/165 2005 843 849
17. E HARRY, M IGNAT, Y PAULEAU, A ROUZAUD, P JULIET Mechanical behaviour of hard PVD multilayered coatings [J] Surf Coat Tech 125 2000 185 189
18. SY LEE, GS KIM, JH HAHN Effect of the Cr content on the mechanical properties of nanostructured TiN/CrN coatings [J] Surf Coat Tech 177/178 2004 426 433
19. T BJORK, R WESTERGARD, S HOGMARK, J BERGSTROM, P HEDENGVIST Physical vapour deposition duplex coatings for aluminium extrusion dies [J] Wear 225/229 1999 1123 1130 (Pubitemid 30115957)
20. B NAVINSEK, P PANJAN, I URANIAN, P CVAHTE, F GORENJAK Improvement of hot-working processes with PVD coatings and duplex treatment [J] Surf Coat Tech 142/143/144 2001 1148 1154 (Pubitemid 32939680)
21. SH AHN, JH LEE, JG KIM, JG HAN Localized corrosion mechanisms of the multilayered coatings related to growth defects [J] Surf Coat Tech 177/178 2004 638 644
22. O KNOTEK, F LOFFLER, B BOSSERHOFF PVD coatings for diecasting moulds [J] Surf Coat Tech 62 1993 630 634
23. A SRIVASTAVA, V JOSHI, R SHIVPURI, R BHATTACHARYA, S DIXIT A multilayer coating architecture to reduce heat checking of die surfaces [J] Surf Coat Tech 163/164 2003 631 636
24. Y WANG A study of PVD coatings and die materials for extended die-casting die life [J] Surf Coat Tech 94/95 1997 60 63
25. M ROSSO, D UGUES, E TORRES, M PERUCCA, P KAPRANOS Performance enhancements of die casting tools through PVD nano-coatings [J] Int J Mater Forming 1 2008 1259 1262
26. yN coated high-speed steel twist drills under dry machining conditions [J] Wear 254 2003 723 734
27. S PALDEY, SC DEEVI Single layer and multilayer wear resistant coatings of (Ti, Al)N: A review [J] Mater Sci Eng A 342 2003 58 79
28. SY LEE, SY LEE Application of PVD coatings for improvement of die performance in copper semi-solid processing [J] Solid State Phenomena 116/117 2006 64 87
29. E LUGSCHEIDER, K BOBZIN, Th HORNIG, M MAES Investigation of the residual stresses and mechanical properties of (Cr, Al)N arc PVD coatings used for semi-solid metal (SSM) forming dies [J] Thin Solid Films 420/421 2002 318 323
30. K BOBZIN, N BAGCIYAN, P IMMICH Deposition of oxides as tool protection for large thixoforming dies by using the pulsed MSIP-PVD process [J] Solid State Phenomena 141/142/143 2008 249 254
31. SY YOON, JK KIM, KH KIM A comparative study on tribological behavior of TiN and TiAlN coatings prepared by arc ion plating technique [J] Surf Coat Tech 161 2002 237 242
32. JL MO, MH ZHU Tribological oxidation of PVD hard coatings [J] Tribol Int 42 2009 1758 1764
33. MH STAIA, MD D'ALESSANDRIA, DT QUINTO, FM ROUDET ASTORT High temperature tribological characterization of commercial TiAlN coatings [J] J Phys: Condens Matter 18 2006 1727 1736
34. R RODRIGUEZ-BARACALDO, JA BENITO, ES PUCHI-CABRERA, MH STAIA High temperature wear resistance of (TiAl)N PVD coating on untreated and gas nitrided AISI H13 steel with different heat treatments [J] Wear 262 2007 380 389
35. LA DOBRZANSKI, M POLOK, P PANJAN, S BUGLIOSI, M ADAMIAK Improvement of wear resistance of hot work steels by PVD coatings deposition [J] J Mater Process Technol 155/156 2004 1995 2001
36. WD MUNZ Titanium aluminum nitride films - A new alternative to TiN films[J] J Vac Sci Technol A4 1986 2717 2725
37. xN films [J] Surf Coat Tech 165 2003 163 167
38. JL ENDRINO, GS FOX-RABINOVICH, C GEY Hard AAlTiN, AlCrN PVD coatings for machining of austenitic stainless steel J] Surf Coat Tech 200 2006 6840 6845
39. GS FOX-RABINOVICH, BD BEAKE, JL ENDRINO, SC VELDHUIS, R PARKINSON, LS SHUSTER Effect of mechanical properties measured at room and elevated temperatures on the wear resistance of cutting tools with TiAlN and AlCrN coatings [J] Surf Coat Tech 200 2006 5738 5742
40. J SJOLEN, L KARLSSON, S BRAUN, R MURDEY, A HORLING, L HULTMAN Structure and mechanical properties of arc evaporated Ti-Al-O-N thin films [J] Surf Coat Tech 201 2007 6392 6403
41. M URGEN, V EZIRMIK, E SENEL, Z KAHRAMAN, K KAZMANLI The effect of oxygen content on the temperature dependent tribological behavior of Cr-O-N coatings [J] Surf Coat Tech 203 2009 2272 2277
42. D ISLER, Y BIROL, M URGEN PVD coated hot work tool steels for tooling applications in semi-solid processing of steels [J] Int J Mater Formin 3 suppl 2010 745 750 10.007/s/2289-010-0878-x
43. O KNOTEK, T LEYENDECKERS On the structure of (Ti, Al) NPVD coatings [J] J Solid State Chem 70 1987 318 322
44. LUGSCHEIDER E, BOBZIN K, HORNIG Th, MAES M. Proc. 6th International Tooling Conference. Karlstad, Sweden, 2002: 979-990.
45. V LESKOVSEK, B PODGORNIK, M JENKO A PACVD duplex coating for hot-forging applications [J] Wear 266 2009 453 460
46. CMD STARLING, JRT BRANCO Thermal fatigue of hot work tool steel with hard coatings [J] Thin Solid Films 308/309 1997 436 442
47. S WILSON, AT ALPAS Tribo-layer formation during sliding wear of TiN coatings [J] Wear 245 2000 223 229
48. L REBOUTA, F VAZ, M ANDRITSCHKY, MF da SILVA Oxidation resistance of (Ti, AlZr, Si)N coatings in air [J] Surf Coat Tech 76/77 1995 70 74
49. D MCINTYRE, JE GREENE, G HAKANSSON, JE SUNDGREN, WD MUNZ Oxidation of metastable single-phase polycrystalline Ti0.5Al0.5N films: Kinetics and mechanisms [J] J Appl Phys 67 1990 1542 1553