A study of the wear mechanisms of Ti1-xAlxN and Ti1-x-yAlxCryN coated high-speed steel twist drills under dry machining conditions

Wear

Volumn 254, Issue 7-8, 2003, Pages 723-734

  Harris, S G ^a   Doyle, E D ^a   Vlasveld, A C ^a   Audy, J ^a   Quick, D ^b  

^a SWINBURNE UNIVERSITY OF TECHNOLOGY   (Australia)

^b FORD MOTOR COMPANY   (United States)

Author keywords

Cathodic arc evaporation; Dry machining; PVD; TiAlCrN; TiAlN; Wear

Indexed keywords

DRILLS; MACHINING; METAL CUTTING; PROTECTIVE COATINGS; SCANNING ELECTRON MICROSCOPY; TITANIUM COMPOUNDS; TORQUE; TRIBOLOGY; WEAR OF MATERIALS;

TWIST DRILLS;

TOOL STEEL;

CUTTING TOOL; DRILL BIT; METALLIC COATING; SCANNING ELECTRON MICROSCOPY; STEEL; SURFACE CONTACT; WEAR;

EID: 0037861999     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0043-1648(03)00258-8     Document Type: Article

References (35)

1. Münz W.-D.Titanium aluminium nitride films: a new alternative to TiN coatings J. Vac. Sci. Technol. A 4 1986 2717
2. Smith I.J.Gillibrand D.Brooks J.S.Münz W.-D.Dry cutting performance of HSS twist drills coated with improved TiAlN Surf. Coat. Technol. 90 1997 164-171
3. 0.5N films-kinetics and mechanisms J. Appl. Phys. 673 1990 1542-1553
4. zN layers grown by combined steered-arc/unbalanced-magnetron-sputter deposition Surf. Coat. Technol. 94-95 1997 226-231
5. Hultman L.Thermal stability of nitride thin films Vacuum 57 2000 1-30
6. Wang D.-Y.Li Y.-W.Chang C.-L.Ho W.-Y.Deposition of high quality (Ti, Al)N hard coatings by vacuum arc evaporation process Surf. Coat. Technol. 114 1999 109-113
7. Tönshoff H.K.Mohlfeld A.PVD-coatings for wear protection in dry cutting operations Surf. Coat. Technol. 93 1997 88-92
8. x)N coatings in dry drilling Surf. Coat. Technol. 94-95 1997 603-609
9. Kalidas S.DeVor R.E.Kapoor S.G.Experimental investigation of the effect of drill coatings on hole quality under dry and wet drilling conditions Surf. Coat. Technol. 148 2001 117-128
10. Bates C.E.Eleftheriou E.Effects of inoculation on machinability of gray cast iron Trans. Am. Foundrymen's Soc. 10799-122 1999 659-669
11. Burke C.M.Moore D.J.Parolini J.R.Rundman K.B.Waarala D.Machinability of gray cast iron: a drilling study Trans. Am. Foundrymen's Soc. 10799-106 1999 567-575
12. Chiesa F.Mathieu D.Brunelle M.A study on the metallurgical quality of disk brake rotors Trans. Am. Foundrymen's Soc. 10496-58 1996 19-27
13. xN PVD coatings for dry high speed cutting operations Surf. Eng. 141 1998 37-41v
14. J.R. Davis, ASM Specialty Handbook: Cast Irons, vol. 494, Materials Park, OH, 1996.
15. Marwanga R.O.Voigt R.C.Cohen P.H.Influence of graphite morphology and matrix structure on chip formation during machining of gray irons Trans. Am. Foundrymen's Soc. 10799-080 1999 595-607
16. Harris S.G.Doyle E.D.Vlasveld A.C.Dolder P.J.Dry machining-commercial viability through filtered arc vapour deposited coatings Surf. Coat. Technol. 133-134 2000 383-388
17. Harris S.G.Doyle E.D.Vlasveld A.C.Dolder P.J.Dry cutting performance of partially filtered arc deposited titanium aluminium nitride coatings with various metal nitride base coatings Surf. Coat. Technol. 146-147 2001 305-311
18. Harris S.G.Doyle E.D.Vlasveld A.C.Audy J.Long J.M.Quick D.Influence of chromium content on the dry machining performance of cathodic arc evaporated TiAlN coatings Wear 254 2003 185-194
19. Ber A.Kaldor S.The first seconds of cutting, wear behaviour Ann. CIRP 31/1 1982 13-17
20. Söderberg S.Hogmark S.Wear mechanisms and tool life of high speed steels related to microstructure Wear 110 1986 315-329
21. Lenz E.Mayer J.E.Lee D.G.Investigation in drilling Ann. CIRP 27/1 1978 49-53
22. E.D. Doyle, K.T. Stevens, A. Thomas, The potential for improved life of cutting tools by coating with titanium nitride applied by physical vapour deposition, in: Proceedings of the Third International Conference on Manufacturing Engineering, Newcastle, August 4-6, 1986, pp. 57-61.
23. R.O. Burant, M.J. McGinty, Cutting Tools/Drills-Fundamentals, Manufacturing Engineering, March 1979.
24. J. Gorse, Consider the "whole" picture, Manufacturing Engineering, May 1999, pp. 74-81.
25. Tavares C.J.Rebouta L.Alves E.Cavaleiro A.Goudeau P.Riviere J.P.Declemy A.A structural and mechanical analysis on PVD-grown (Ti, Al)N/Mo multilayers Thin Solid Films 377-378 2000 425-429
26. Hovsepian P.E.Lewis B.D.Münz W.-D.Rouzaud A.Juliet P.Chromium nitride/niobium nitride superlattice coatings deposited by combined cathodic-arc/unbalanced magnetron technique Surf. Coat. Technol. 116-119 1999 727-734
27. J.M. Long, Depth-profile analysis of elements by glow discharge optical emission spectrometry, in: Proceedings of the 10th Asia-Pacific Conference on Non-destructive Testing (Brisbane, Australia), September 17-21, 2001 (R. Diederichs, NDTnet: http://www.ndt.net/ article/apcndt01/
28. J.M. Long, Glow-discharge optical emission spectrometry for elemental depth-profiling in materials, in: E. Pereloma, K. Raviprasad (Eds.), Proceedings of the Engineering Materials 2001, Melbourne, September 23-26, 2001, Institute of Materials Engineering, Australasia, pp. 87-92.
29. Daimler-Benz Adhesion Test, Verein Deutscher Ingenieure (VDI)-Richlinie 3198, 1992, p. 7.
30. Fuh K.-H.Chen W.-C.Cutting performance of thick web drills with curved primary cutting edges Int. J. Mach. Tools Manuf. 357 1995 975-991
31. Cselle T.Barimani A.Today's applications and future developments of coatings for drills and rotating cutting tools Surf. Coat. Technol. 76-77 1995 712-718
32. Armarego E.J.A.Zhao H.Predictive force models for point-thinned and circular centre edge twist drill designs Ann. CIRP 45/1 1996 65-70
33. M.C. Shaw, C. Oxford, On the drilling of Metals 2, Trans. ASME 79 (1957) 139-144.
34. Kinsman M.D. Machinery 102 1963 1014-1018
35. Chen W.-C.Fuh K.-H.Wu C.-F.Chang B.-R.Design optimisation of a split-point drill by force analysis J. Mater. Process. Technol. 58 1996 314-322