Using spent fluid catalytic cracking (FCC) catalyst as pozzolanic addition - A review;Uso del catalizador gastado de craqueo catalítico (FCC) como adición puzolánica - Revisión

Ingenieria e Investigacion

Volumn 30, Issue 2, 2010, Pages 35-42

  Castellanos, Nancy Torres ^a   Agredo, Janneth Torres ^b  

^a ESCUELA COLOMBIANA DE INGENIERÍA JULIO GARAVITO   (Colombia)

^b UNIVERSIDAD NACIONAL DE COLOMBIA   (Colombia)

Author keywords

Additions; Catalytic cracking residue; Durability; Portland cement

Indexed keywords

EID: 77956596967     PISSN: 01205609     EISSN: None     Source Type: Journal    
DOI: 10.15446/ing.investig.v30n2.15728     Document Type: Article

References (53)

1. ACI Committee 201.2R-01., Guide to durable concrete., Report ACI 201R, American Concrete Institute, Detroit, EUA, 2001.
2. Agámez, P., Oviedo L., Navarro, U., Centeno, M., Odriozola, J., Análisis de la microporosidad de catalizadores de FCC., Rev. Acad. Colomb. Cienc., Vol. 30, No. 115, 2006, pp. 271-278.
3. Antiohos, S. K., Chouliar, E., Tsimas, S., Re-use of spent catalyst from oil-cracking refineries as supplementary cementing material., J. China Particuology, Vol. 4, No. 2, 2006, pp. 73-76.
4. Basaldella, E., Paladino, J., Solari, M., Valle, G., Exhausted fluid catalytic cracking catalyst as raw materials for zeolite synthesis., Applied Catalysis, Vol. 66, 2006, pp. 186-191.
5. Borrachero, M., Monzó, J., Payá, J., Mora, Vunda, Velásquez, S., Soriano, L., El catalizador gastado de craqueo catalítico adicionado al cemento Pórtland: las primeras 48 horas de curado y la evolución de la resistencia mecánica., VIII Congreso Nacional de Propiedades Mecánicas de Sólidos, Gandia 2002.
6. Bukowska, M., Pacewska, B., Wilinska, I., Corrosion resistance of cement mortars containing spent catalyst of fluidized bed cracking (FBCC) as an additive., Thermal Analysis and Calorimetry, Vol. 74, 2003, pp. 931-942.
7. 4 medium., Cement and Concrete Research, Vol. No 34, 2004, pp. 759-767.
8. Domone. P. L., A review of the hardened mechanical properties of selfcompacting concrete., Cement and Concrete Composites, Vol. 29, 2007, pp. 1-12.
9. Fernández, M., Hormigón., Colegio de Ingenieros de Caminos, Canales y Puertos, Sexta edición, Enero, 2002.
10. Furimsky, E., Review of spent refinery catalyst: environment, safety and utilization., Catalysis Today, Vol. No. 30, 1996, pp. 223-286.
11. García de Lomas, M., S. de Rojas, M., Frías, M., Comportamiento científico-técnico de los cementos Pórtland elaborados con catalizador FCC., Monografía No. 412, Instituto de Ciencias de la Construcción Eduardo Torroja, CSIC, 2006.
12. 2 Cements., Cement and Concrete Research, Vol. 34, 2004, pp. 1489-1498.
13. Girbés, I., Evaluación del uso de subproductos industriales de carácter puzolánico en conglomerantes de cemento Pórtland. Influencia de su utilización sobre la durabilidad de los materiales., tesis Doctoral, Universidad Politécnica de Valencia, Valencia, 2004.
14. Hsiu Liang, Ch., Tseng, Y., Hsu, K., Spent FCC catalyst as a pozzolanic material for high-performance mortars., Cement and Concrete Composites, Vol. 26, 2004, pp. 657-664.
15. Jung-Hsiu, W., Wu, W., Hsu, K., The effect of waste oil-cracking catalyst on the compressive strength of cement pastes and mortars., Cement and Concrete Research, No. 33, 2003, pp. 245-253.
16. Hsu, K., Tseng, Y., Ku, F., Su, N., Oil cracking waste catalyst as an active pozzolanic material for superplasticized mortars., Cement and Concrete Research, Vol. 31, 2001, pp. 1815-1820.
17. Malhotra, V. M, Metha, P. K., Pozzolanic and cementitious material., Gordon and Breach Publishers, Ottawa, 1996.
18. Monzó, J., Payá, J., Borrachero, M. V., Mora, E., Velázquez, S., Fluid Catalytic Cracking Residue (FC3R) as a New Pozzolanic Material: Thermal Analysis Monitoring of FC3R/Portland Cement Reactions, Seventh CANMET/ACI., International Conference on Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, Suplementary papers, India, Julio, 2001, pp. 22-27.
19. Su, N., Chen, Z., Fang, H., Reuse of spent catalyst as fine aggregate in cement mortar., Cement and concrete composites, Vol. No. 23, 2001, pp. 111-118.
20. Su, N, Fang, H., Chen, Z., Liu, F., Reuse of waste catalysts from petrochemical industries for cement substitution., Cement and Concrete Research, Vol. No. 30, 2000, pp. 1773-1783.
21. Pacewska, B., Wilinska, I., Kubissa, J., Use of spent catalyst from catalytic cracking in fluidized bed as a new concrete additive., Termochimica acta, No. 322, 1998, pp. 175-181.
22. Pacewska, B., Wilinska, I., Bukowska, M., Hydration of cement slurry in the presence of spent cracking catalyst., Thermal Analysis and Calorimetry, No. 60, 2000, pp. 71-78.
23. Pacewska, B., Wilinska, I., Bukowska, M., Nocún, W., Effect of waste aluminosilicate material on cement hydration and properties of cement mortar., Cement and Concrete Research, No, 32, 2002, pp. 1823-1830.
24. Pacewska, B., Wilinska, I., Bukowska, M., Blonkowski, G., An attempt to improve the pozzolanic activity of waste aluminoslicate catalyst., Thermal Analysis and Calorimetry, No. 77, 2002, pp. 133-142.
25. Pacewska, B., Burowska, M., Ska, I., Swat, M., Modification of properties of concrete by a new pozzolan a waste catalyst from the catalytic process in a fluidized bed., Cement and Concrete Research, Vol. 32, 2002, pp. 145-152.
26. Pacewska B., Bukowska, M., Wilinska, I., Influence of some aggressive media on corrosion resistance of mortars with spent cracking catalyst., Thermal Analysis and Calorimetry, Vol. 60, 2000, pp. 257-264.
27. Payá, J., Monzó, J., Borrachero, M., Fluid catalytic cracking catalyst residue (FC3R) an excellent mineral by-product for improving early strength development of cement mixtures., Cement and Concrete Research, Vol. 29, 1999, pp. 1773-1779.
28. Payá, J., Monzó, J., Borrachero, M., Physical, chemical and mechanical properties of fluid catalytic cracking catalyst residue (FC3R) blended cements., Cement and concrete research, Vol. 31, 2001, pp. 57-61.
29. Payá, J., Monzó, J., Borrachero, M., Velázquez, S., Evaluation of the pozzolanic activity of fluid catalytic cracking catalyst residue (FC3R), Thermogravimetric analysis studies on FC3R-Portland cement pastes., Cement and Concrete Research, No. 33, 2003. pp. 603-609.
30. Payá, J., Monzó, J., Borrachero, M., Amahjour, F., Girbés, I., Velázquez, S., Ordóñez, L., Advantages in the use of fly ashes in cements containig pozzolanic combustion residues: silica fume, sewage sludge ash, spent fluidized bed catalyst and rice husk ash., Chemical Technology and Biotechnology, No. 77, 2002, pp. 331-335.
31. Payá, J., Borrachero, M., Monzó, J., Bonilla, M., León, C., Soriano, L., Morteros de cemento compuestos con fibras AR y puzolana procedente de catalizadores FCC usados., V Congreso Nacional de Materiales Compuestos, AEMAC 2003, Asociación Española de Materiales Compuestos, Zaragoza, Junio, 2003.
32. Payá, J., Monzó, J., Borrachero, M., Velázquez, S., Bonilla, M., Determination of the pozzolanic activity of fluid catalytic cracking residue. Thermogravimetric analysis studies on FC3R-lime pastes, Cement and Concrete Research, No. 33, 2003, pp. 1085-1091.
33. Payá, J., Monzó, J., Borrachero, M., Velázquez, S., Chemical activation of pozzolanic reaction of fluid catalytic cracking residue (FC3R) in lime pastes: thermal analysis., Advances in Cement Research, No. 19, 2004, pp. 123-130.
34. Payá, J., Monzó, J., Borrachero, M., Velázquez, S., The chemical activation of pozzolanic reaction of fluid catalytic cracking catalyst residue (FC3R) in lime pastes., Advances in Cement Research, No. 19, 2007, pp. 9-16.
35. Payá, J., Monzó, J., Borrachero, M., Serna, P., Velázquez, S., Ordonez, L. M., El factor de eficacia cementante de puzolanas síliceas y silicoaluminosas muy reactivas., VII congreso Nacional de Propiedades Mecánicas de Sólidos, Gandia, 2002, pp. 591-600.
36. Piles, V., Borrachero, M., Payá, J., Monzó, J., Codoñer, A., Ensayos de envejecimiento acelerado sobre materiales compuestos con base de cal o con base mixta de cal y yeso., VI Congreso Nacional de Materiales Compuestos, AEMAC 2005, Asociación Española de Materiales Compuestos, Valencia, Junio, 2005, pp. 947-954.
37. Price, L., Worrell, E., Phylipsen, D., Energy Use and Carbon Dioxide Emissions in Energy-Intensive Industries in Key developing Countries., Proceedings of the 1990 Earth Technologies Forum, Washington, DC, September, 1999, pp. 27-29.
38. Rattanasak, U., Jaturapitakkul, C., Sudaprasert, T., Compressive strength and heavy metal leaching behaviour of mortars containing spent catalyst., Waste Management & Research, No. 19, 2001, pp. 456-464.
39. Roskovic, R, Bjegovic, D., Role of mineral additions in reducing CO2 emission., Cement and Concrete Research, Vol. 35, 2005, pp. 974-978.
40. Soriano, M. L., Nuevas aportaciones en el desarrollo de materiales cementantes con residuo de catalizador de craqueo catalítico (FCC)., Tesis presentada a la Universidad Politécnica de Valencia, para optar al grado de Doctor, 2008.
41. Taylor, H. F. W., Enciclopedia de la química industrial, La Química de los Cementos., Traducción de F. Romero Rossi, Escuela de Ingenieros Industriales de Bilbao, Universidad de Deusto. Ediciones URMO, Bilbao, España, 1967.
42. Torres, J., Baquero, E., Silva, A., Evaluación de la actividad puzolánica de un residuo de un residuo de la industria del petróleo., Revista Dyna, Año. 76, No. 158, 2009, pp. 49-53.
43. Torres, J., Baquero, E., Silva, A., Mejía, R., Estudio del desempeño puzolánico de un residuo de la industrial del petróleo., Memorias Tenth International confrence on non-conventional materials and technologies, NOCMAT 2008, Cali, Universidad del Valle, Noviembre, 2008, Cali, Colombia, 12-14 Noviembre, 2008.
44. Wan-Lung, W., Jung-Hsiu, W., Kung-Chung, H., Subproductos del fraccionamiento catalítico del petróleo: características, actividad puzolánica y su efecto en las propiedades del mortero., Cemento Hormigón, No. 850, Junio, 2003, pp. 18-25.
45. Xincheng, P., Investigation on pozzolanic effect of mineral additives in cement and concrete by specific strength index., Cement and Concrete Research, 1995.
46. Yu, L. H., Ou, H., Lee, L. L., Investigation on pozzolanic effect of perlite powder in concrete., Cement and Concrete Research, Vol. 33, 2003, pp. 73-76.
47. Tseng, Y., Huang, Ch., Hsu, K., The pozzolanic activity of a calcined waste FCC catalyst and its effect on the compressive strength of cementitious materials., Cement and Concrete Research, Vol. 32, 2005, pp. 782-787.
48. Zornoza, E., Garcés, P., Monzó, J., Borrachero, M. V., Payá, J., Accelerated carbonation of cement pastes partially substituid with fluid catalytic cracking catalyst residue (FC3R)., Cement and Concrete Composites, Vol. 31, 2009, pp. 134-138.
49. Zornoza, E., Payá, J., Monzó, J., Borrachero, M. V., Garcés, P., The Carbonation of OPC mortars partially substituted with spent fluid catalytic catalyst (FC3R) and its influence on their mechanical properties., Construction and Building Materials, Vol. 23, 2009, pp. 1323-1328.
50. Zornoza, E., Garcés, P., Payá, J., Climent, M. A., Improvement of the chloride ingress resistance of OPC mortars by using spent cracking catalyst., Cement and Concrete Research, Vol. 39, 2009, pp. 126-139.
51. Cheng, Y. C., Yu, C. C., Optimal region for design and control of ternary systems., AIChE J., Vol. 49, 2003, pp. 682-705.
52. Elliot, T. R., Luyben, W. L., Quantitative assesment of controllability during the design of a ternary system with two recycle streams., Ind. Eng. Chem. Res., Vol. 35, 1996, pp. 3470-3479.
53. Georgakis, C., On the use of extensive variables in process dynamics and control., Chem. Eng. Sci., Vol. 41, 1986, pp. 1471-1484.