Preparation in supercritical CO2 of porous poly(methyl methacrylate)-poly(l-lactic acid) (PMMA-PLA) scaffolds incorporating ibuprofen

Journal of Supercritical Fluids

Volumn 54, Issue 3, 2010, Pages 335-341

  Velasco, D ^a   Benito, L ^a   Fernandez Gutierrez M ^b   San Roman J ^a   Elvira, C ^a  

^a INSTITUTO DE CIENCIA Y TECNOLOGÍA DE POLÍMEROS   (Spain)

^b UNIVERSIDAD COMPLUTENSE DE MADRID   (Spain)

Author keywords

Polymers; Porous scaffolds; Supercritical CO2; Tissue engineering

Indexed keywords

BIOACTIVE MOLECULES; BIODEGRADABLE POROUS SCAFFOLDS; CELL SEEDING; CLEAN TECHNIQUE; HUMAN FIBROBLAST; POLY L LACTIC ACID; POLYMER BLEND COMPOSITION; POROUS SCAFFOLD; POROUS STRUCTURES; SEM; SUPERCRITICAL CO; SUPERCRITICAL CONDITION; SUPERCRITICAL PARAMETERS; THERMAL TRANSITIONS; TISSUE ENGINEERING APPLICATIONS;

ANIMAL CELL CULTURE; BODY FLUIDS; CELL CULTURE; ESTERS; LACTIC ACID; ORGANIC ACIDS; POLYMER BLENDS; SCAFFOLDS; SCANNING ELECTRON MICROSCOPY; TISSUE;

TISSUE ENGINEERING;

EID: 77956482401     PISSN: 08968446     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.supflu.2010.05.012     Document Type: Conference Paper

References (39)

1. R. Langer, and J.P. Vacanti Tissue engineering Science 260 1993 920 926
2. The National Cooperative Transplantation Study, Sponsored by the United Network For Organ Sharing, Richmond, VA, USA, 1991.
3. G. Ciapetti, L. Ambrosio, L. Savarino, D. Granchi, E. Cenni, N. Baldini, S. Pagani, S. Guizzardi, F. Causa, and A. Giunti Osteoblast growth and function in porous poly ε-caprolactone matrices for bone repair: a preliminary study Biomaterials 24 2003 3815 3824
4. A.G. Mikos, A.J. Thorsen, L.A. Czerwonka, Y. Bao, R. Langer, J.N. Winslow, and J.P. Vacanti Preparation and characterization of poly(l-lactic acid) foams Polymer 35 1994 1068 1077
5. D.J. Mooney, S. Park, P.M. Kaufmann, K. Sano, K. Mcnamara, J.P. Vacanti, and R. Langer Biodegradable sponges for hepatocyte transplantation J. Biomed. Mater. Res. 29 1995 959 966
6. H. Lo, M.S. Ponticiello, and K.W. Leong Fabrication of controlled release biodegradable foams by phase separation Tissue Eng. 1 1995 15 28
7. S.K. Goel, and E.J. Beckman Generation of microcellular polymeric foams using supercritical carbon dioxide. I. Effect of pressure and temperature on nucleation Polym. Eng. Sci. 34 1994 1137 1147
8. S. Siripurapu, J.A. Coughlan, R.J. Spontak, and S.A. Khan Surface-constrained foaming of polymer thin films with supercritical carbon dioxide Macromolecules 37 2004 9872 9879
9. K.A. Arora, A.J. Lesser, and J.T. McCarthy Preparation and characterization of microcellular polystyrene foams processed in supercritical carbon dioxide Macromolecules 31 1998 4614 4620
10. C.M. Stafford, T.P. Russell, and J.T. McCarthy Expansion of polystyrene using supercritical carbon dioxide: effects of molecular weight, polydispersity, and low molecular weight components Macromolecules 32 1999 7610 7616
11. 2 Ind. Eng. Chem. Res. 39 39 2000 4622 4626
12. M. Xanthos, U. Yilmazer, S.K. Dey, and J. Quintans Melt viscoelasticity of polyethylene terephthalate resins for low density extrusion foaming Polym. Eng. Sci. 40 2000 554 566
13. D.J. Mooney, D.F. Baldwin, N.P. Suh, J.P. Vacati, and R. Langer Novel approach to fabricate porous sponges of poly(d,l-lactic-co-glycolic acid) without the use of organic solvents Biomaterials 17 1996 1417 1422
14. L. Singh, V. Kumar, and B.D. Ratner Generation of porous microcellular foams using presaturated pellets and solid-state nucleation Biomaterials 25 2004 2611 2617
15. S. Cotugno, E. di Maio, G. Mensitieri, S. Jannace, G.W. Roberts, R.G. Carbonell, and H.B. Hopfenberg Characterization of microcellular biodegradable polymeric foams produced from supercritical carbon dioxide solutions Ind. Eng. Chem. Res. 44 2005 1795 1803
16. 2-ethanol mixtures as blowing agents J. Supercrit. Fluids 42 2007 265 272
17. M.J. Jenkins, K.L. Harrison, M. Silva, M.J. Whitaker, K.M. Shakesheff, and S.M. Howdle Characterization of microcellular foams produced from semi-crystalline PCL using supercritical carbon dioxide Eur. Polym. J. 42 2006 3145 3151
18. X. Wang, W. Li, and V. Kumar A method for solvent-free fabrication of porous polymer using solid-state foaming and ultrasound for tissue engineering applications Biomaterials 27 2006 1924 1929
19. Y. Ema, M. Ikeya, and M. Okamoto Foam processing and cellular structure of polylactide-based nanocomposites Polymer 47 2006 5350 5359 (Pubitemid 44041581)
20. Q. Guo, J. Wang, Ch.B. Park, and M. Ohshima A microcellular foaming simulation system with a high pressure-drop rate Ind. Eng. Chem. Res. 45 45 2006 6153 6161
21. Ch.B. Park, D.F. Baldwin, and N. Suh Effect of the pressure drop rate on cell nucleation in continuous processing of microcellular polymers Polym. Eng. Sci. 35 1995 432 440
22. 2: an experimental and theoretical study Polymer 48 2007 5928 5939
23. J.S. Colton, and N.P. Suh Nucleation of microcellular theory and practice Polym. Eng. Sci. 27 1987 500 503
24. L.G. Griffith, and G. Naughton Tissue engineering - current challenges and expanding opportunities Science 295 2002 1009 1014
25. R.G. Pearson, R. Bhandari, R.A. Quirk, and K.M. Shakesheff Recent advances in tissue engineering: an invited review J. Long-Term Effects Med. Implants 12 12 2002 1 33
26. J.A. Hubbell Bioactive biomaterials Curr. Biotechnol. 10 1999 123 129
27. M.J. Whitaker, R.A. Quirk, S.M. Howdle, and K.M. Shakesheff Growth factor release from tissue engineering scaffolds J. Pharm. Pharmacol. 53 2001 1427 1437
28. P.X. Ma Scaffolds for tissue fabrication Mater. Today 7 2004 30 40
29. X. Li, and P.X. Ma Polymeric scaffolds bone tissue engineering Ann. Biomed. Eng. 32 2004 477 486
30. J.R. Robinson, and V.H.L. Lee Controlled Drug Delivery - Fundamentals and Application (Drugs and the Pharmaceutical Sciences) 2nd ed. 1987 Marcel Dekker New York pp. 4-94
31. 2 processing of polymers for the production of materials with applications in tissue engineering and drug delivery J. Mater. Sci. 43 43 2008 1939 1947
32. G.A. Abraham, A. Gallardo, A. Motta, C. Migliaresi, and J. San Román Microheterogeneous polymer systems prepared by suspension polymerization of methyl methacrylate in the presence of poly(ε- caprolactone) Macromol. Mater. Eng. 282 2000 44 50
33. A.R. Duarte, D.F. Mano, and R.L. Reis Perspectives on: supercritical fluid technology for 3D tissue engineering scaffolds applications J. Bioact. Compat. Polym. 24 2009 385 400
34. H. Tai, M.L. Mather, D. Howard, W. Wang, L.J. White, J.A. Crowe, S.P. Morgan, A. Chandra, D.J. Williams, S.M. Howdle, and K.M. Shakesheff Control of pore size and structure of tissue engineering scaffolds produced by supercritical fluid processing Eur. Cells Mater. 14 2007 64 77
35. A. Salerno, P.A. Netti, E. Di Maio, and S. Iannace Engineering of foamed structures for biomedical application J. Cell. Plastics 45 2009 103 117
36. 2 mixtures at elevated pressures J. Polym. Sci. Part B: Polym. Phys. 25 1987 2497 2510
37. 2 J. Appl. Polym. Sci. 30 1985 2633 2642
38. 2 mixtures at elevated pressures J. Polym. Sci. Part B: Polym. Phys. 29 1991 631 633
39. 2 impregnation and by dissolution-evaporation techniques J. Control. Rel. 99 2004 231 240