Gain scheduled control of an air conditioning system using the Youla parameterization

IEEE Transactions on Control Systems Technology

Volumn 18, Issue 5, 2010, Pages 1216-1225

  Rasmussen, Bryan P ^a   Alleyne, Andrew G ^b  

^a Department of Electrical and Computer Engineering   (United States)

^b UNIVERSITY OF ILLINOIS AT URBANA CHAMPAIGN   (United States)

Author keywords

Air conditioning; gain scheduling; heating, ventilation, and air conditioning (HVAC); lyapunov; nonlinear control

Indexed keywords

AIRCONDITIONING SYSTEMS; COOLING CAPACITY; DESIGN FREEDOM; GAIN SCHEDULING; GAIN-SCHEDULED CONTROL; HEAT AND MASS TRANSFER; LOCAL CONTROLLER NETWORKS; LYAPUNOV; MULTIPLE-INPUTMULTIPLE- OUTPUTS; NON LINEAR CONTROL; PRIMARY CONTROL; REFRIGERANT LOOP; REFRIGERATION SYSTEM; SYSTEM EFFICIENCY; VAPOR-COMPRESSION SYSTEMS; YOULA PARAMETERIZATION;

CLOSED LOOP SYSTEMS; HEATING; MASS TRANSFER; REFRIGERATION; SCHEDULING;

AIR CONDITIONING;

EID: 77956230067     PISSN: 10636536     EISSN: None     Source Type: Journal    
DOI: 10.1109/TCST.2009.2035104     Document Type: Article

References (40)

1. Energy Information Administration, U.S. Dept. Energy, Washington, DC, "Annual energy review 2005," DOE/EIA-0384(2005), 2006.
2. J. Koomey and R. E. Brown, "The role of building technologies in reducing and controlling peak electricity demand," Lawrence Berkeley National Laboratory, Berkeley, CA, LBNL-49947, 2002 [Online]. Available: http://enduse.lbl.gov/projects/peakdemand.html
3. X. D. He, S. Liu, and H. Asada, "Modeling of vapor compression cycles for multivariable feedback control of HVAC systems," ASME J. Dyn. Syst. Meas. Control, vol. 119, no. 2, pp. 183-191, 1997.
4. D. J. Leith and W. E. Leithead, "Survey of gain-scheduling analysis and design," Int. J. Control, vol. 73, no. 11, pp. 1001-1025, 2000.
5. W. J. Rugh and J. S. Shamma, "Research on gain scheduling," Automatica, vol. 36, no. 10, pp. 1401-1425, 2000.
6. A. Packard and M. Kantner, "Gain scheduling the LPV way," in Proc. IEEE Conf. Dec. Control, Kobe, Japan, 1996, pp. 3938-3941.
7. D. J. Stilwell and W. J. Rugh, "Interpolation of observer state feedback controllers for gain scheduling," IEEE Trans. Autom. Control, vol. 44, no. 6, pp. 1225-1229, Jun. 1999.
8. D. J. Stilwell, "J-Q interpolation for gain scheduled controllers," in Proc. IEEE Conf. Dec. Control, Phoenix, AZ, 1999, pp. 749-754.
9. P. Apkarian and R. J. Adams, "Advanced gain-scheduling techniques for uncertain systems," IEEE Trans. Control Syst. Technol., vol. 6, no. 1, pp. 21-32, Jan. 1998.
10. H. Niemann and J. Stoustrup, "Gain scheduling using the Youla parameterization," in Proc. IEEE Conf. Dec. Control, Phoenix, AZ, 1999, pp. 2306-2311.
11. H. Buschek, "Full envelope missile autopilot design using gain scheduled robust control," J. Guid., Control, Dyn., vol. 22, no. 1, pp. 115-122, 1999.
12. R. Zhang, A. Alleyne, and D. E. Carter, "Generalized multivariable gain scheduling with robust stability analysis," ASME J. Dyn. Syst., Meas., Control, vol. 27, no. 4, pp. 668-687, 2005.
13. R. Murray-Smith and T. Johansen, Multiple Model Approaches to Nonlinear Modelling and Control. Bristol, PA: Taylor and Francis, 1997.
14. K. J. Hunt and T. A. Johansen, "Design and analysis of gain-scheduled control using local controller networks," Int. J. Control, vol. 66, no. 5, pp. 619-651, 1997.
15. J. Lebrun and J. P. Bourdouxhe, "Reference guide for dynamic models of HVAC equipment," ASHRAE, Atlanta, GA, Project 738-TRP, 1998.
16. B. T. Beck and G. L.Wedekind, "A generalization of the system mean void fraction model for transient two-phase evaporating flows," ASME J. Heat Transfer, vol. 103, no. 1, pp. 81-85, 1981.
17. E. W. Grald and J. W. MacArthur, "A moving-boundary formulation for modeling time-dependent two-phase flows," Int. J. Heat Fluid Flow, vol. 13, no. 3, pp. 266-272, 1992.
18. B. P. Rasmussen, "Dynamic modeling and advanced control of air conditioning and refrigeration systems," Univ. Illinois, Urbana-Champaign, 2005.
19. B. P. Rasmussen and A. Alleyne, "Control-oriented modeling of transcritical vapor compression systems," ASME J. Dyn. Syst., Meas., Control, vol. 126, no. 1, pp. 54-64, 2004.
20. P. M. T. Broersen and M. F. G. van der Jagt, "Hunting of evaporators controlled by a thermostatic expansion valve," ASME J. Dyn. Syst. Meas. Control, vol. 102, no. 2, pp. 130-135, 1980.
21. A. Outtagarts, P. Haberschill, and M. Lallemand, "Transient response of an evaporator fed through an electronic expansion valve," Int. J. Energy Res., vol. 21, pp. 793-807, 1997.
22. D. P. Finn and C. J. Doyle, "Control and optimization issues associated with algorithm-controlled refrigerant throttling devices," ASHRAE Trans., vol. 106, no. 1, pp. 524-533, 2000.
23. T. Q. Qureshi and S. A. Tassou, "Variable-speed capacity control in refrigeration systems," Appl. Thermal Eng., vol. 16, no. 2, pp. 103-113, 1996.
24. M. C. Keir and A. G. Alleyne, "Feedback Structures for Vapor Compression Cycle Systems," in Proc. Amer. Control Conf., New York, 2007, pp. 5052-5058.
25. B. D. Eldredge, B. P. Rasmussen, and A. G. Alleyne, "Movingboundary heat exchanger models with variable outlet phase," J. Dyn. Syst., Meas., Control, vol. 130, no. 6, pp. 061003-061012, 2008.
26. T. Takagi and M. Sugeno, "Fuzzy identification of systems and its applications to modelling and control," IEEE Trans. Syst., Man, Cybern., vol. SMC-15, no. 1, pp. 116-132, Jan. 1985.
27. R. Zhang, A. G. Alleyne, and D. E. Carter, "Robust gain scheduling control of an earthmoving vehicle powertrain," in Proc. Amer. Control Conf., Denver, CO, 2003, pp. 4969-4974.
28. T.-T. Tay, I. Mareels, and J. B. Moore, High Performance Control. Ann Arbor, MI: Birkhauser, 1998.
29. D. J. Stilwell and W. J. Rugh, "Stability preserving interpolation methods for the synthesis of gain scheduled controllers," Automatica, vol. 36, no. 5, pp. 665-671, 2000.
30. H. Niemann and J. Stoustrup, "An architecture for implementation of multivariable controllers," in Proc. Amer. Control Conf., San Diego, CA, 1999, pp. 4029-4033.
31. D. J. Stilwell and W. J. Rugh, "Interpolation methods for gain scheduling," in Proc. IEEE Conf. Dec. Control, Tampa, FL, 1998, pp. 3003-3008.
32. J. D. Bendtsen, J. Stoustrup, and K. Trangbaek, "Bumpless transfer between observer-based gain scheduled controllers," Int. J. Control, vol. 78, no. 7, pp. 491-504, 2005.
33. J. Stoustrup and M. Komareji, "A parameterization of observer-based controllers: Bumpless transfer by covariance interpolation," in Proc. Amer. Control Conf., 2009, pp. 1871-1875.
34. C. E. Garcia, D. M. Prett, and M. Morari, "Model predictive control: Theory and practice-A survey," Automatica, vol. 25, no. 3, pp. 335-348, 1989.
35. D. Q. Mayne, J. B. Rawlings, C. V. Rao, and P. O. M. Scokaert, "Constrained model predictive control: Stability and optimality," Automatica, vol. 36, no. 6, pp. 789-814, 2000.
36. D. Mayne, "Nonlinear model predictive control: Challenges and opportunities," in Proc. Int. Symp. Nonlinear Model Predictive Control-Assessment Future Directions, Ascona, Switzerland, 2000, pp. 23-44.
37. F. Allgower, "Nonlinear model predictive control," IEE Proc.-Control Theory Appl., vol. 152, no. 3, pp. 257-258, 2005.
38. S. Boyd, L. El Ghaoui, E. Feron, and V. Balakrishnan, Linear Matrix Inequalities in System and Control Theory. Philadelphia, Pa: SIAM, 1994.
39. B. P. Rasmussen, A. G. Alleyne, and A. B. Musser, "Model-driven system identification of transcritical vapor compression systems," IEEE Trans. Control Syst. Technol., vol. 13, no. 3, pp. 444-451, May 2005.
40. B. D. O. Anderson and J. B. Moore, Optimal Control: Linear Quadratic Methods. Englewood Cliffs, NJ: Prentice-Hall.