Effect of Ca and rare earth elements on impression creep properties of AZ91 magnesium alloy

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 41, Issue 8, 2010, Pages 1973-1982

  Nami, B ^a   Razavi, H ^a   Mirdamadi, S ^a   Shabestari, S G ^a   Miresmaeili, S M ^b  

^a IRAN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Iran)

^b SHAHID RAJAEE TEACHER TRAINING UNIVERSITY   (Iran)

Author keywords

[No Author keywords available]

Indexed keywords

AL11RE3; AZ91 ALLOY; AZ91 MAGNESIUM ALLOYS; CREEP MECHANISM; CREEP PROPERTIES; DISLOCATION CLIMB; IMPRESSION CREEP; INTERDENDRITIC REGIONS; INTERMETALLIC COMPOUNDS; MINIMUM CREEP RATES; STRESS EXPONENTS;

ACTIVATION ENERGY; CALCIUM; CALCIUM ALLOYS; CERIUM ALLOYS; CONSTITUTIVE EQUATIONS; CREEP; INTERMETALLICS; MAGNESIUM; MAGNESIUM ALLOYS; RARE EARTH ELEMENTS; RARE EARTHS;

CREEP RESISTANCE;

EID: 77955717812     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-010-0238-y     Document Type: Article

References (55)

1. P. Zhang: Scripta Mater., 2005, vol.52, pp. 277-282
2. N. Balasubramani, A. Srinivasan, U.T.S. Pillai, and B.C. Pai: Mater. Sci. Eng. A, 2007, vol.457, pp. 275-281
3. K.U. Kainer and F. von Buch: Magnesium-Alloys and Technology, Wiley-VCH, New York, NY, 2003, pp. 1-22.
4. A. Luo and M. Pekguleryuz: J. Mater. Sci., 1994, vol.29 (20), pp. 5259-5271
5. F.H. Froes, D. Eliezer, and E. Aghion: JOM, 1998, vol.50 (9), pp. 30-34.
6. B.L. Mordike and T. Ebert: Mater. Sci. Eng. A, 2001, vol.302, pp. 37-45.
7. D. Amberger, P. Eisenlohr, and M. Goken: Mater. Sci. Eng. A, 2009, vols. 510-511, pp. 398-402.
8. K. Hirai, H. Somekawa, Y. Takigawa, and K. Higashi: Mater. Sci. Eng. A, 2005, vol.403, pp. 276-280
9. F. Kabirian and R. Mahmudi: Metall. Mater. Trans. A, 2009, vol.40A, pp. 2190-2201
10. F. Khomamizadeh, B. Nami, and S. Khoshkhooei: Metall. Mater. Trans. A, 2005, vol.36A, pp. 3489-3494
11. Y. Lu, Q. Wang, X. Zeng, W. Ding, C. Zhai, and Y. Zhu: Mater. Sci. Eng. A, 2000, vol.278, pp. 66-76.
12. J. Wang, L. Wang, J. An, and Y. Liu: J. Mater. Eng. Perform., 2008, vol.17, pp. 725-729
13. G. Wu, Y. Fan, H. Gao, C. Zhai, and Y.P. Zhu: Mater. Sci. Eng. A, 2005, vol.408, pp. 255-263
14. D. Wenwen, S. Yangshan, M. Xuegang, X. Feng, Z. Min, and W. Dengyun: Mater. Sci. Eng. A, 2003, vol.356, pp. 1-7.
15. Y. Guangyin, W. Qudong, and D. Wenjiang: J. Mater. Sci., 2002, vol.37, pp. 127-132
16. A Srinivasan, U.T.S. Pillai, and B.C. Pai: Metall. Mater. Trans. A, 2005, vol.36A, pp. 2235-2243
17. R. Ninomiya, T. Ojiro, and K. Kubota: Acta Metall. Mater., 1995, vol.43, pp. 669-674
18. E. Aghion, B. Bronfin, F.V. Buch, S. Schumann, and H. Friedrich: JOM, 2003, vol.55 (11), pp. 30-33.
19. W. Qudong, C. Wenzhou, Z. Xiaoqin, L. Yizhen, D Wenjiang, Z. Yanping, andX.Xiaoping: J.Mater. Sci., 2001, vol.36, pp. 3035-3040
20. Y. Wang, Q. Wang, C. Ma, W. Ding, and Y. Zhu: Mater. Sci. Eng. A, 2003, vol.342, pp. 178-182
21. W. Qudong, L. Yizhen, Z. Xiaoqin, D. Wenjiang, Z. Yanping, L. Qinghua, and L. Jie:Mater. Sci. Eng. A, 1999, vol.271, pp. 109-115
22. P. Li, B. Tang, and E.G. Kandalova: Mater. Lett., 2005, vol.59, pp. 971-975
23. D.R. Askeland: The Science and Engineering of Materials, Chapman and Hall, New York, NY, 1990.
24. B. Nami, S.G. Shabestari, S.M. Miresmaeili, H. Razavi, and S. Mirdamadi: J. Alloys Compd., 2010, vol.489, pp. 570-575
25. B. Nami: Ph.D. Thesis, Iran University of Science and Technology, Tehran, Iran, 2010.
26. C. Park, X. Long, S. Haberman, S. Ma, I. Dutta, R. Mahajan, and S.G. Jadhav: J. Mater. Sci., 2007, vol.42, pp. 5182-5187
27. L. Peng, F. Yang, J.F. Nie, and J.C.M. Li: Mater. Sci. Eng. A, 2005, vols. 410-411, pp. 42-47.
28. K. Ishikawa, H. Watanabe, and T. Mukai: Mater. Lett., 2005, vol.59, pp. 1511-1515
29. S.M. Zhu, B.L. Mordike, and J.F. Nie: Metall. Mater. Trans. A, 2006, vol.37A, pp. 1221-1229
30. M.E. Kassner and M.T.P. Prado: Fundamentals of Creep in Metals and Alloys, 1st ed., Elsevier, New York, NY, 2004.
31. B. Kondori and R. Mahmudi: Metall. Mater. Trans. A, 2009, vol.40, pp. 2007-2015
32. S. Ji, M. Qian, and Z. Fan: Mater. Sci. Eng. A, 2006, vol.434, pp. 7-12.
33. H. Somekawa, K. Hirai, H. Watanabe, Y. Takigawa, and K. Higashi: Mater. Sci. Eng. A, 2005, vol.407, pp. 53-61.
34. B. Jing, S. Yangshan, X. Feng, X. Shan, Q. Jing, and T. Weijian: Scripta Mater., 2006, vol.55, pp. 1163-1166
35. M.D. Mathew, H. Yang, S. Movva, and K.L. Murty: Metall. Mater. Trans. A, 2005, vol.36A, pp. 99-105.
36. S. Spigarelli, M. Cabibbo, E. Evangelista, M. Talianker, and V. Ezersky: Mater. Sci. Eng. A, 2000, vol.289, pp. 172-181
37. T.G. Langdon:Metall.Mater. Trans. A, 2002, vol.33A, pp. 249-259
38. K. Milicka, J. Cadek, and P. Rys: Acta Metall., 1970, vol.18, pp. 1071-1082
39. L. Shi and D.O. Northwood: Acta Metall. Mater., 1994, vol.42 (3), pp. 871-877
40. M. Regev, E. Aghion, A. Rosen, and M. Bamberger: Mater. Sci. Eng. A, 1998, vol.52, pp. 6-16.
41. S. Spigarelli, M. Regev, E. Evangelista, and A. Rosen: Mater. Sci. Technol., 2001, vol.17, pp. 627-638
42. F. Kabirian and R. Mahmudi: Metall. Mater. Trans. A, 2009, vol.40A, pp. 116-127
43. M. Kunst, A.F. Bunk, G. Lesperance, P. Plamondon, and U. Glatzel: Mater. Sci. Eng. A, 2009, vols. 510-511, pp. 109-125
44. L. Robinson and O.D. Sherby: Acta Metall., 1969, vol.17, pp. 109-125
45. H. Baker: Alloys Phase Diagram, ASM INTERNATIONAL, Metals Park, OH, 1992.
46. K. Ozturk, Y. Zhong, A.A. Luo, and Z.K. Liu: JOM, 2003, vol.55, pp. 40-44.
47. S.M. Zhu, M.A. Gibson, J.F. Nie, M.A. Easton, and T.B. Abbott: Scripta Mater., 2008, vol.58 (6), pp. 477-480
48. A.A. Luo, M.P. Balogh, and B.R. Powell: Metall. Mater. Trans. A, 2002, vol.33A, pp. 567-574
49. Y. Terada, R. Sota, N. Ishimatsu, T. Sato, and K. Ohori: Metall. Mater. Trans. A, 2004, vol.35A, pp. 3029-3032
50. W. Blum, P. Zhang, B.Watzinger, B.V. Grossmann, and H.G. Haldenwanger: Mater. Sci. Eng. A, 2001, vols. 319-321, pp. 735-740
51. S. Celotto and T.J. Bastow: Acta Mater., 2001, vol.49, pp. 41-51.
52. C.J. Bettles: Mater. Sci. Eng. A, 2003, vol.348, pp. 280-288
53. X. Min, Y. Sun, F. Xue, W. Du, and D. Wu: Mater. Chem. Phys., 2002, vol.78, pp. 88-93.
54. R Kondori and B Mahmudi: Mater. Sci. Eng. A,, 2010, vol.527, pp. 2014-2021
55. M.S. Dargusch, S.M. Zhu, J.F. Nie, and G.L. Dunlop: Scripta Mater., 2009, vol.60, pp. 116-119