Influence of vortex flow and cavitation on near-nozzle diesel spray dispersion angle

Atomization and Sprays

Volumn 19, Issue 3, 2009, Pages 247-261

  Gavaises, Manolis ^a   Andriotis, A ^a  

^a CITY UNIVERSITY   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

ATOMIZERS; DIESEL ENGINES; DISTRIBUTION FUNCTIONS; HYDRODYNAMICS; NOZZLES; PESTICIDES; PROBABILITY DISTRIBUTIONS; VORTEX FLOW;

ATOMIZATION PROCESS; CAVITATION STRUCTURES; CYLINDRICAL HOLES; DIESEL SPRAYS; HIGH-SPEED; HIGH-SPEED IMAGES; INJECTED LIQUIDS; NOZZLE DESIGNS; NOZZLE FLOWS; SPRAY ANGLES; SPRAY CONE ANGLES; SPRAY CONES; SPRAY DISPERSIONS; TWO-STROKE DIESEL ENGINES;

CAVITATION;

EID: 54749157990     PISSN: 10445110     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (39)

1. J. B. Heywood, Internal Combustion Engine Fundamentals, McGraw-Hill, New York, 1988,
2. F. Ruiz and N. Chigier, Parametric Experiments on Liquid Jet Atomization Spray Angle, Atomization and Sprays, vol. 1, no. 1, pp. 23-45, 1991.
3. R. Payri, J. M. García, F. J. Salvador, and J. Gimeno, Using Spray Momentum Flux Measurements to Understand the Influence of Diesel Nozzle Geometry on Spray Characteristics, Fuel, vol. 84, pp. 551-561, 2005.
4. C. Soteriou, R. J. Andrews, and M. Smith, Direct Injection Diesel Sprays and the Effect of Cavitation and Hydraulic Flip on Atomization, SAE Paper No. 950080, 1995.
5. M. Gavaises, C. Arcoumanis, H. Roth, Y. S. Choi, and A. Theodorakakos, Nozzle Flow and Spray Characteristics from VCO Diesel Injector Nozzles, THIESEL 2002 Conference on Thermo- and Fluid-Dynamic Processes in Diesel Engines, Valencia, Spain, 2002.
6. F. Payri, V. Bermudez, R. Payri, and R. J Salvado, The Influence of Cavitation on the Internal Flow and the Spray Characteristics in Diesel Injection Nozzles, Fuel, vol. 83, pp. 551-561, 2004.
7. G. J. Smallwood and O. L. Gulder, Views on the Structure of Transient Diesel Sprays, Atomization and Sprays, vol. 10, no. 3-5, pp. 355-386, 2000.
8. H. Hiroyasu, Spray Breakup Mechanism from the Hole-Type Nozzle and Its Applications, Atomization and Sprays, vol. 10, nos. 3-5, pp. 511-521, 2000.
9. N. Tamaki, M. Shimizu, and H. Hiroyasu, Enhancement of the Atomization of a Liquid Jet by Cavitation in a Nozzle Hole, Atomization and Sprays, vol. 11, no. 2, pp. 125-137, 2001.
10. D. Stepowski and O. Werquin, Measurement of the Liquid Volume Fraction and Its Statistical Distribution in the Near Development Field of a Spray, Atomization and Sprays, vol. 14, no. 3, pp. 243-264, 2004.
11. M. Paciaroni, M. Linne, T. Hall, J.-P. Delplanque, and T. Parker, Single-Shot Two-Dimensional Ballistic Imaging of the Liquid Core in an Atomizing Spray, Atomization and Sprays, vol. 16, no. 1, pp. 51-70, 2006.
12. J. Desantes, R. Payri, J. Pastor, and J. Gimeno, Experimental Characterization of Internal Nozzle Flow and Diesel Spray Behavior. Part I: Non-Evaporative Conditions, Atomization and Sprays, vol. 15, no. 5, pp. 517-544, 2005.
13. A. Kyubok, J, Kim, and Y. Yoon, Effects of Orifice Internal Flow on Transverse Injection into Subsonic Crossflows: Cavitation and Hydraulic Flip, Atomization and Sprays, vol. 16, no. 1, pp. 15-34, 2006.
14. F. Tanner, K. A. Feigl, S. A. Ciatti, C.F. Poweel, S. K. Cheong, J. Liu, and J. Wang, Structure of High Velocity Dense Sprays in the Near Nozzle Region, Atomization and Sprays, vol. 16, pp. 579-597, 2006.
15. Y. Yong, C. Powell, R. Poola, J. Wang, and J. Schaller, Quantitative Measurements of Diesel Fuel Spray Characteristics in the Near-Nozzle Region Using X-Ray Absorption, 13th International Multidimensional Engine Modeling User's Group Meeting, March 2, Detroit, vol. 11, pp. 1-6, 2001.
16. R. D. Reitz and F. V. Bracco, Mechanism of Atomization of a Liquid Jet, Phys. Fluids, vol. 25, no. 10, pp. 1730-1742, 1982.
17. K. Y. Huh, E. J. Lee, and J. Y. Koo, Diesel spray atomization model considering nozzle exit turbulence conditions, Atomization and Sprays, vol. 8, no. 4, pp. 453-469, 1998.
18. C. Arcoumanis and M. Gavaises, Linking Nozzle Flow with Spray Characteristics in a Diesel Fuel Injection System, Atomization and Sprays, vol. 8, no. 3, pp. 307-347, 1998.
19. C. Soteriou, R. Andrews, and M. Smith, Further Studies of Cavitation and Atomization in Diesel Injection, SAE Paper No. 1999-01-1486, 1999.
20. C. Soteriou, R. Andrews, M. Smith, N. Torres, and S. Sankhalpara, The Flow Patterns and Sprays of Variable Orifice Nozzle Geometries for Diesel Injection, SAE Paper No. 2000-01-0943, 2000.
21. H. Chaves, M. Knapp, A. Kubitzek, and F. Obermeier, Experimental Study of Cavitation in the Nozzle Hole of Diesel Injectors Using Transparent Nozzles, SAE Paper No. 950290, 1995.
22. H. Chaves, C. Kirmse, and F. Obermeier, The Influence of Nozzle Inlet Curvature on Unsteady Cavitation in Transparent Diesel Injection Nozzles, 1st International Colloquium on Microhydrodynamics, Paris, 2000.
23. C. Badock, R. Wirth, S. Kampmann, and C. Tropea. Fundamental Study of the Influence of Cavitation on the Internal Flow and Atomization of Diesel Sprays, Proc. ILASS-EUROPE, Florence, 1997.
24. C. Badock, R. Wirth, and C. Tropea. The Influence of Hydro Grinding on Cavitation inside a Diesel Injection Nozzle and Primary Break-Up under Unsteady Pressure Conditions, Proc. ILASS-EUROPE, Toulouse, France, 1999.
25. C. Badock, R. Wirth, A. Fath, and A. Leipertz, Investigation of Cavitation in Real Size Diesel Injection Nozzles, Int. J. Heat Fluid Flow, vol. 20, no. 5, pp. 538-544, 1999.
26. M, Blessing, G. Konig, C. Kruger, U. Michels, and V. Schwarz, Analysis of Flow and Cavitation Phenomena in Diesel Injection Nozzles and its Effect on Spray and Mixture Formation, SAE Paper No, 2003-01-1358, 2003.
27. L.-y. Feng, W.-q. Long, B.-g. Du, H. Tian, and T. Obokata, Experimental Research on Spray and Combustion Characteristics of the Third Generation Conical Spray, J. Marine Sci. Appl., vol. 4, no. 1, pp. 44-49, 2005.
28. C. Soteriou, M. Lambert, S. Zuelch, and D. Passerel, The Flow Characteristics of High Efficiency Diesel Nozzles with Enhanced Geometry Holes, Proc. THIESEL International Conference on Thermo- and Fluid Dynamic Processes in Diesel Engines, Valencia, Spain, 2006.
29. R. Payri, A. Gil, A. H. Plazas, and B. Gimenez, Influence of Nozzle Seat Type on Internal Flow of Convergent Nozzles, SAE Paper No. 2004-01-2010, 2004.
30. C. Arcoumanis, H. Flora, M. Gavaises, N. Kampanis, and R. Horrocks, Investigation of Cavitation in a Vertical Multi-Hole Injector, SAE Paper No. 1999-01-0524, 1999.
31. C. Arcoumanis, M. Badami, H. Flora, and M. Gavaises, Cavitation in Real-Size Multi-Hole Diesel Injector Nozzles, SAE Trans., J. Engines, vol. 109-3, 2000.
32. H. Roth, M. Gavaises, and C, Arcoumanis, Cavitation Initiation, Its Development and Link with Flow Turbulence in Diesel Injector Nozzles, SAE Trans., J. Engines, vol. 111-3, pp. 561-580, 2002,
33. H. Roth, E. Giannadakis, M, Gavaises, C. Arcoumanis, K. Omae, I. Sakata, M. Nakamura, and H. Yanagihara, Effect of Multi-Injection Strategy on Cavitation Development in Diesel Injector Nozzle Holes, SAE Trans., J. Engines, vol. 114-3, pp. 1029-1045, 2005.
34. C. Soteriou, R. I. Andrews, N. Torres, M. Smith, and R. Kunkulagunta. Through the Diesel Nozzle Hole - A Journey of Discovery II, Proc. ILASS-Europe, Zurich, 2001.
35. M. Gavaises and A. Andriotis, Cavitation Inside Multi-Hole Injectors for Large Diesel Engines and Its Effect on the Near-Nozzle Spray Structure, SAE Trans., J. Engines, vol. 115-3, pp. 634-647, 2006.
36. A. Andriotis, M. Spathopoulou, and M. Gavaises, Effect of Nozzle Flow and Cavitation Structures on Spray Development in Low-Speed Two-Stroke Diesel Engines, Proc. CIMAC 2007, Vienna, May 2007, 2007.
37. E. Giannadakis, M. Gavaises, H. Roth, and C. Arcoumanis. Cavitation Modelling in Single-Hole Diesel Injector Based on Eulerian-Lagrangian Approach, Proc. THIESEL International Conference on Thermo- and Fluid Dynamic Processes in Diesel Engines, Valencia, Spain, 2004,
38. E. Giannadakis, D. Papoulias, M. Gavaises, C. Arcoumanis, C. Soteriou, and W. Tang, Evaluation of the Predictive Capability of Diesel Nozzle Cavitation Models, SAE Paper No. 2007-01-0245, 2007.
39. E. Giannadakis, Modelling of Cavitation in Automotive Fuel Injector Nozzles, Ph.D. thesis, Imperial College, University of London, London, 2005.