A simple and efficient reformulation of the classical Manson-Coffin curve to predict lifetime under multiaxial fatigue loading-part I: Plain materials

Journal of Engineering Materials and Technology

Volumn 131, Issue 2, 2009, Pages 0210091-0210099

  Susmel, Luca ^a   Meneghetti, Giovanni ^b   Atzori, Bruno ^b  

^a UNIVERSITY OF FERRARA   (Italy)

^b UNIVERSITY OF PADOVA   (Italy)

Author keywords

Critical plane; Multiaxial fatigue; Strain based approach

Indexed keywords

CYCLIC LOADS; SHEAR STRESS;

CRACK INITIATION SITES; CRITICAL PLANES; FATIGUE LIFE ESTIMATION; MULTI-AXIAL FATIGUE; MULTIAXIAL CYCLIC LOADING; MULTIAXIAL CYCLIC LOADING PATHS; SHEAR STRESS AMPLITUDE; STRAIN BASED;

SHEAR STRAIN;

EID: 77955260486     PISSN: 00944289     EISSN: 15288889     Source Type: Journal    
DOI: 10.1115/1.3078300     Document Type: Article

References (48)

1. You, B. R., and Lee, S. B., 1996, "A Critical Review on Multiaxial Fatigue Assessments of Metals", Int. J. Fatigue, 18, pp. 235-244.
2. Socie, D. F., and Marquis, G. B., 2000, Multiaxial Fatigue, SAE, Warrendale, PA.
3. Susmel, L., and Tovo, R., 2003, "A Quantitative Comparison Among Multiaxial Fatigue Criteria for Low Cycle Fatigue", International Conference on LCF 2003, P. D. Portella, H. Sehitoglu, K. Hatanaka, eds., Berlin, Germany, Sept., pp. 283-288.
4. Papadopoulos, I. V., Davoli, P., Gorla, C., Filippini, M., and Bernasconi, A., 1997, "A Comparative Study of Multiaxial High-Cycle Fatigue Criteria for Metals", Int. J. Fatigue, 19, pp. 219-235.
5. Brown, M. W., and Miller, K. J., 1973, "A Theory for Fatigue Under Multiaxial Stress-Strain Conditions", Proc. Inst. Mech. Eng., 187, pp. 745-755.
6. Kanazawa, K., Miller, K. J., and Brown, M. W., 1977, "Low-Cycle Fatigue Under Out-of-Phase Loading Conditions", ASME J. Eng. Mater. Technol., 99, pp. 222-228.
7. Wang, C. H., and Brown, M. W., 1993, "A Path-Independent Parameter for Fatigue Under Proportional and Non-Proportional Loading", Fatigue Fract. Eng. Mater. Struct., 16, pp. 1285-1298.
8. Socie, D. F., 1987, "Multiaxial Fatigue Damage Models", ASME J. Eng. Mater. Technol., 109, pp. 293-298.
9. Fatemi, A., and Socie, D. F., 1988, "A Critical Plane Approach to Multiaxial Fatigue Damage Including Out-of-Phase Loading", Fatigue Fract. Eng. Mater. Struct., 11, pp. 149-166.
10. Smith, K. N., Watson, P., and Topper, T. H., 1970, "A Stress-Strain Function for the Fatigue of Metals", J. Mater., 5, pp. 767-778.
11. Garud, Y. S., 1981, "A New Approach to the Evaluation of Fatigue Under Multiaxial Loadings", ASME J. Eng. Mater. Technol., 103, pp. 119-125.
12. Ellyin, F., 1989, "Cyclic Strain Energy Density as a Criterion for Multiaxial Fatigue Failure", Biaxial and Multiaxial Fatigue, EGF 3, Mechanical Engineering, London, pp. 571-583.
13. Ellyin, F., Golos, K., and Xia, Z., 1991, "In-Phase and Out-of-Phase Multiaxial Fatigue", ASME J. Eng. Mater. Technol., 113, pp. 112-118.
14. Ellyin, F., and Xia, Z., 1993, "A General Fatigue Theory and Its Application to Out-of-Phase Cyclic Loading", ASME J. Eng. Mater. Technol., 115, pp. 411-416.
15. Susmel, L., and Lazzarin, P., 2002, "A Bi-Parametric Modified Wöhler Curve for High Cycle Multiaxial Fatigue Assessment", Fatigue Fract. Eng. Mater. Struct., 25, pp. 63-78.
16. Lazzarin, P., and Susmel, L., 2003, "A Stress-Based Method to Predict Lifetime Under Multiaxial Fatigue Loadings", Fatigue Fract. Eng. Mater. Struct., 26, pp. 1171-1187.
17. Susmel, L., 2008, "Multiaxial Fatigue Limits and Material Sensitivity to Non-Zero Mean Stresses Normal to the Critical Planes", Fatigue Fract. Eng. Mater. Struct., 31, pp. 295-309.
18. Papadopoulos, I. V., 1998, "Critical Plane Approaches in High-Cycle Fatigue: On the Definition of the Amplitude and Mean Value of the Shear Stress Acting on the Critical Plane", Fatigue Fract. Eng. Mater. Struct., 21, pp. 269-285.
19. Susmel, L., and Petrone, N., 2003, "Multiaxial Fatigue Life Estimations for 6082-T6 Cylindrical Specimens Under In-Phase and Out-of-Phase Biaxial Loadings", Biaxial and Multiaxial Fatigue and Fracture, A. Carpinteri, M. de Freitas, and A. Spagnoli, eds., ESIS-Elsevier, Oxford, UK, pp. 83-104.
20. Taylor, D., 1999, "Geometrical Effects in Fatigue: A Unifying Theoretical Model", Int. J. Fatigue, 21, pp. 413-420.
21. Susmel, L., and Taylor, D., 2003, "Two Methods for Predicting the Multiaxial Fatigue Limits of Sharp Notches", Fatigue Fract. Eng. Mater. Struct., 26, pp. 821-833.
22. Susmel, L., 2004, "A Unifying Approach to Estimate the High-Cycle Fatigue Strength of Notched Components Subjected to Both Uniaxial and Multiaxial Cyclic Loadings", Fatigue Fract. Eng. Mater. Struct., 27, pp. 391-411.
23. Basquin, O. H., 1910, "The Exponential Law of Endurance Tests", Proceedings of American Society for Testing and Materials, Vol. 10, pp. 625-630.
24. Manson, S. S., 1954, "Behaviour of Materials Under Conditions of Thermal Stress", National Advisory Committee for Aeronautics, Report No. NACA TN-2933.
25. Coffin, L. F., 1954, "A Study of the Effects of Cyclic Thermal Stresses on a Ductile Metal", Trans. ASME, 76, pp. 931-950.
26. Morrow, J. D., 1965, "Cyclic Plastic Strain Energy and Fatigue of Metals", Internal Friction, Damping and Cyclic Plasticity, ASTM STP 378, American Society for Testing and Materials, Philadelphia, PA, pp. 45-84.
27. Zahavi, E., 1996, Fatigue Design, CRC, Boca Raton, FL.
28. Socie, D. F., Waill, L. A., and Dittmer, D. F., 1985, "Biaxial Fatigue of Inconel 718 Including Mean Stress Effects", Multiaxial Fatigue, ASTM STP 853, K. J. Miller and M. W. Brown, eds., American Society for Testing and Materials, Philadelphia, PA, pp. 463-481.
29. Socie, D. F., Kurath, P., and Koch, J., 1989, "A Multiaxial Fatigue Damage Parameter", Biaxial and Multiaxial Fatigue, EGF 3, M. W. Brown and K. J. Miller, eds., Mechanical Engineering, London, pp. 535-550.
30. Hua, C. T., and Socie, D. F., 1984, "Fatigue Damage in 1045 Steel Under Constant Amplitude Biaxial Loading", Fatigue Fract. Eng. Mater. Struct., 7, pp. 165-179.
31. Kurath, P., Downing, S. D., and Galliart, D. R., 1989, "Summary of Non-Hardened Notched Shaft-Round Robin Program", Multiaxial Fatigue-Analysis and Experiments, G. E. Leese and D. F. Socie, SAE, Warrendale, PA, Vol. AE-14, pp. 13-32.
32. Kim, K. S., Park, J. C., and Lee, J. W., 1999, "Multiaxial Fatigue Under Variable Amplitude Loads", ASME J. Eng. Mater. Technol., 121, pp. 286-293.
33. Chen, X., An, K., and Kim, K. S., 2004, "Low-Cycle Fatigue of 1Cr-18Ni-9Ti Stainless Steel and Related Weld Metal Under Axial, Torsional and 90° Outof-Phase-Loading", Fatigue Fract. Eng. Mater. Struct., 27, pp. 439-448.
34. Jiang, Y., Hertel, O., and Vormwald, M., 2007, "An Experimental Evaluation of Three Critical Plane Multiaxial Fatigue Criteria", Int. J. Fatigue, 29, pp. 1490-1502.
35. Jayaraman, N., and Ditmars, M. M., 1989, "Torsional and Biaxial (Tension-Torsion) Fatigue Damage Mechanisms in Waspaloy at Room Temperature", Int. J. Fatigue, 11, pp. 309-318.
36. Nelson, D. V., and Rostami, A., 1997, "Biaxial Fatigue of A533B Pressure Vessel Steel", ASME J. Pressure Vessel Technol., 119, pp. 325-331.
37. Petrone, N., 1996, "Metodologie di progettazione a fatica per componenti soggetti a sollecitazioni pluriassiali", Ph. D. thesis, University of Padova, Italy.
38. Shang, D. G., Sun, G. Q., and Yan, C. L., 2007, "Multiaxial Fatigue Damage Parameter and Life Prediction for Medium-Carbon Steel Based on the Critical Plane Approach", Int. J. Fatigue, 29, pp. 2200-2207.
39. Lin, H., Nayeb-Hashemi, H., and Pelloux, R. M., 1992, "Constitutive Relations and Fatigue Life Prediction for Anisotropic Al-6061-T6 Rods Under Biaxial Proportional Loadings", Int. J. Fatigue, 14, pp. 249-259.
40. Hoffmeyer, J., Döring, R., Seeger, T., and Vormwald, M., 2006, "Deformation Behaviour, Short Crack Growth and Fatigue Lives Under Multiaxial Nonproportional Loading", Int. J. Fatigue, 28, pp. 508-520. (Pubitemid 43106648)
41. Kim, K. S., Chen, X., Han, C., and Lee, H. W., 2002, "Estimations Methods for Fatigue Properties of Steels Under Axial and Torsional Loading", Int. J. Fatigue, 24, pp. 783-793.
42. Jiang, Y., and Sehitoglu, H., 1996, "Modelling of Cyclic Ratchetting Plasticity-Part I: Development and Constitutive Relations", ASME Trans. J. Appl. Mech., 63, pp. 720-725.
43. Jiang, Y., and Sehitoglu, H., 1996, "Modelling of Cyclic Ratchetting Plasticity-Part II: Comparison of Model Simulations With Experiments", ASME Trans. J. Appl. Mech., 63, pp. 726-733.
44. Tomkins, B., 1968, "Fatigue Crack Propagation-An Analysis", Philos. Mag., 18, pp. 1041-1066.
45. Miller, K. J., 1993, "The Two Thresholds of Fatigue Behaviour", Fatigue Fract. Eng. Mater. Struct., 16, pp. 931-939.
46. Murakami, Y., and Miller, K. J., 2005, "What Is Fatigue Damage? A View Point From the Observation of Low Cycle Fatigue Process", Int. J. Fatigue, 27, pp. 991-1005.
47. Lemaitre, J., and Chaboche, J. L., 1990, Mechanics of Solid Materials, Cambridge University Press, Cambridge.
48. Itoh, T., Sakane, M., Ohnami, M., and Socie, D. F., 1995, "Nonproportional Low Cycle Fatigue Criterion for Type 304 Stainless Steel", ASME J. Eng. Mater. Technol., 117, pp. 285-292.