Low-cycle fatigue of 1Cr-18Ni-9Ti stainless steel and related weld metal under axial, torsional and 90° out-of-phase loading

Fatigue and Fracture of Engineering Materials and Structures

Volumn 27, Issue 6, 2004, Pages 439-448

  Chen, X ^a   An, K ^a   Kim, K S ^b  

^a TIANJIN UNIVERSITY   (China)

^b Pohang University of Science and Technology (POSTECH)   (South Korea)

Author keywords

1Cr 18Ni 9Ti stainless steel; Multiaxial fatigue; Welded joint

Indexed keywords

DUCTILITY; ELASTIC MODULI; FATIGUE OF MATERIALS; HARDENING; METALLOGRAPHIC MICROSTRUCTURE; POISSON RATIO; SHEAR STRENGTH; SHEAR STRESS; STRAIN; WELDS; YIELD STRESS;

FATEMI-SOCIE DAMAGE PARAMETER; FATIGUE RESISTANCE; LOW-CYCLE FATIGUE; OUT-OF-PHASE LOADING; STRESS-STRAIN RELATIONSHIP; TORSIONAL CYCLIC LOADING; UNIAXIAL LOADING; WANG-BROWN DAMAGE PARAMETER;

STAINLESS STEEL;

EID: 2442686993     PISSN: 8756758X     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1460-2695.2004.00740.x     Document Type: Article

References (15)

1. Radaj, D., Sonsino, C. M. and Flade, D. (1998) Prediction of service fatigue strength of a welded tubular joint on the basis of the notch strain approach. Int. J. Fatigue 20, 471-480.
2. ASME Boiler and Pressure Vessel Code, Section III, American Society of Mechanical Engineers, New York, 1992.
3. Valsan, M., Sundararaman, K., Rao, K. B. S. and Mannan, S. L. (1995) A comparative evaluation of low-cycle fatigue behaviour of type 316LN base metal, 316 weld metal, and 316LN/316weld joint. Metall. Mater. Trans. A 26, 1207-1219.
4. Zhao, Y. X., Gao, Q. and Wang, J.-N. (1999) Interaction and evolution of short fatigue cracks. Fatigue Fract. Engng Mater. Struct. 22, 459-467.
5. Zhao, Y. X., Gao, Q. and Wang, J.-N. (1999) Microstructure effects on short crack behaviour of a stainless steel weld metal during low cycle fatigue. Fatigue Fract. Engng Mater. Struct. 22, 469-480.
6. Cheng, G., Kuang, Z. B., Lou, Z. W. and Hua, L. (1996) Experimental investigation of fatigue behaviour for welded joint with mechanical heterogeneity. Int. J. Pres. Ves. Piping 67, 229-242.
7. Corum, J. M. (1990) Evaluation of weldment creep and fatigue strength-reduction factors for elevated-temperature design. ASME Trans. J. Pres. Ves. Tech. 112, 333-339.
8. Siljander, A., Kurathand, P. and Lawarence, F. V., Jr. (1992) Nonproportional fatigue of welded structure. Advances in Fatigue Lifetime Predictive Techniques, ASME STP1122, 319-338.
9. Sonsino, C. M. (1995) Multiaxial fatigue of welded joints under in-phase and out-of-phase local strains and stresses. Int. J. Fatigue 17, 55-70.
10. Brown, M. W. and Miller, K. J. (1973) A theory for fatigue failure under multi-axial stress-strain conditions. Proc. Inst. Mech. Eng. 187, 745-55.
11. Socie, D. F. (1987) Multiaxial fatigue damage models. ASME J. Engng Mater. Tech. 109, 293-298.
12. Wang, C. H. and Brown, M. W. (1993) A path-independent parameter for fatigue under proportional and nonproportional loading. Fatigue Fract. Engng Mater. Struct. 16, 1285-1298.
13. Fatemi, A. and Socie, D. F. (1988) A critical plane approach to multiaxial fatigue damage including out-of-phase loading. Fatigue Fract. Engng Mater. Struct. 11, 149-65.
14. Chen, X., Gao, Q. and Sun, X. F. (1996) Low cycle fatigue under nonproportional loading. Fatigue Fract. Engng Mater. Struct. 19, 839-854.
15. Kim, K. S. and Park, J. C. (1999) Shear strain based multiaxial fatigue parameters applied to variable amplitude loading. Int. J. Fatigue 21, 475-483.