Bioaccessibility studies of ferro-chromium alloy particles for a simulated inhalation scenario: A comparative study with the pure metals and stainless steel

Integrated Environmental Assessment and Management

Volumn 6, Issue 3, 2010, Pages 441-455

  Midande, Klara ^a   Frutos, Alfredo De ^a,b   Hedberg, Yolanda ^c   Darrie, Grant ^a   Wallinder, Inger Odnevall ^a  

^a ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

^b DEPARTMENT OF PHYSICAL METALLURGY   (Spain)

^c International Chromium Development Association   (France)

Author keywords

Bioaccessibility; Chemical speciation; Ferro chromium alloys; Surface oxide In vitro testing

Indexed keywords

CHROMIUM; IRON; STAINLESS STEEL;

ARTICLE; BIOAVAILABILITY; BIOMIMETICS; CHEMISTRY; COMPARATIVE STUDY; ECOTOXICOLOGY; HUMAN; INHALATION; PARTICLE SIZE; SURFACE PROPERTY;

BIOLOGICAL AVAILABILITY; BIOMIMETICS; CHROMIUM; ECOTOXICOLOGY; HUMANS; INHALATION; IRON; PARTICLE SIZE; STAINLESS STEEL; SURFACE PROPERTIES;

EID: 77954707280     PISSN: 15513793     EISSN: None     Source Type: Journal    
DOI: 10.1002/ieam.32     Document Type: Article

References (46)

1. [ASTM] American Society for Testing and Materials. 2003. Standard test method for determining extractability of metals from art materials. In: ASTM. Annual book of ASTM standards, Volume 06. 02. Philadelphia (PA): ASTM, D5517-03.
2. Balásházy I, Németh I, Alföldy B, Szabó PP, Hegedus CS, HofmannW, Pálfalvi J, Fehér I, Török S. 2000. Aerosol deposition modeling in human airways and alveoli. J Aerosol Sci 31: 482.
3. [CEN] European Committee for Standardization. 1998. Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin. Brussels, Belgium: EC Directive 94/27/EC, EN 1811.
4. Chandler KA, Hudson JC. 1994. Iron and steel. In: Shreir LL, Jarman RA, Burstein GT, editors. Corrosion 3rd ed. Oxford, UK: Butterworth Heinemann, ch 3.1.
5. Chastain J, King RC. 1995. Handbook of X-ray photoelectron spectroscopy. A reference book of standard spectra for identification and interpretation of XPS data. Eden Prairie (MN): Perkin-Elmer, Physical Electronics Division. 261 p.
6. Chiba A, Sakakura S, Kobayashi K, Kusayanagi K. 1997. Dissolution amounts of nickel, chromium and iron from SUS 304, 316 and 444 stainless steels in sodium chloride solutions. J Mater Sci 32: 1995.
7. [ChemSec] The International Chemical Secretariat. 2009. The SIN (Substitute It Now!) list 1.0. [cited 2009 September 18]. Available from: http://www.chemsec.org/list
8. [EC] European Council. 2006. Dangerous substances directive 67/548/EEC Annex I. [cited 2009 September 18]. Available from: http://edexim.jrc.ec.europa. eu/.
9. [EC] European Council. 2006. Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH). Official Journal of the European Union L396: L136/133-L136/280.
10. Flint GN, Carter SV, Fairman B. 1998. Skin allergy from exposure to alloys of chromium. Contact Dermatitis 39: 315-316.
11. Hamel SC, Buckley B, Lioy PJ. 1998. Bioaccessibility of metals in soils for different liquid to solid ratios in synthetic gastric fluid. Environ Sci Technol 32: 358.
12. Hanawa T. 2004. Metal ion release from metal implants. Mater Sci Eng C 24: 745.
13. Herting G, Odnevall Wallinder I, Leygraf C. 2005. A comparison of release rates of Cr, Ni, and Fe from stainless steel alloys and the pure metals exposed to simulated rain events. J Electrochem Soc 152: B23.
14. Herting G, Odnevall Wallinder I, Leygraf C. 2006. Factors that influence the release of metals from stainless steels exposed to physiological media. Corr Sci 48: 2120.
15. Herting G, Odnevall Wallinder I, Leygraf C. 2007. Metal release from various grades of stainless steel exposed to synthetic body fluids. Corr Sci 49: 103.
16. Herting G, Odnevall Wallinder I, Leygraf C. 2008a. Corrosion-induced release of chromium and iron from ferritic stainless steel grade AISI 430 in simulated food contact. J Food Eng 87: 291.
17. Herting G, Odnevall Wallinder I, Leygraf C. 2008b. Corrosion-induced release of the main alloying constituents of manganese-chromium stainless steels in different media. J Environ Monit 10: 1084-1091.
18. Herting G, Odnevall Wallinder I, Leygraf C. 2008c. Metal release rate from AISI 316L stainless steel and pure Fe, Cr and Ni into a synthetic biological medium - a comparison. J Environ Monit 10: 1092-1098.
19. Herting G. 2008. Bioaccessibility of stainless steels: Importance of bulk and surface features [Doctoral Thesis]. Stockholm, Sweden: Royal Institute of Technology, KTH.
20. Herting G, Lindström D, Odnevall Wallinder I, Leygraf C. 2009. Multi-analytical investigation of stainless steel grade AISI 420 in simulated food contact. J Food Eng 93: 23.
21. Hultquist G, Leygraf C, Brune D. 1984. Quantitative measurements of passive dissolution of chromium, iron, and molybdenum from a stainless steel. J Electrochem Soc 131: 1773.
22. [ISO] International Organisation for Standardization. 1995. Air quality - Particle size fraction definitions for health-related sampling. Geneva, Switzerland. ISO 7708.
23. Keddam M. 1995. Anodic dissolution. In: Marcus P, editor. Corrosion mechanisms in theory and practice 2nd ed. Paris, France: Marcel Dekker Inc., p 97-170.
24. Kuhn AT, Rae T. 1988. Synthetic environments for the testing of metallic biomaterials. In: Francis PE, Lee TS, editors. The use of synthetic environments for corrosion testing, ASTM STP 970. Philadelphia (PA): American Society for Testing and Materials, p 79-97.
25. Lesko A, Navara E. 1996. Microstructural characterization of high-carbon ferrochromium. Mater Charact 36: 349-356.
26. Leygraf C, Hultquist G, Olefjord I, Elfström BO, Knyazheva VM, Plaskeyev AV, Kolotyrkin YM. 1979. Selective dissolution and surface enrichment of alloy components of passivated Fe18Cr and Fe18Cr3Mo single crystals. Corr Sci 19: 343.
27. Lide DR. 1999. Handbook of chemistry and physics. 80th ed.ISBN 0-8493-0480-486 Boca Raton (FL): CRC Press.
28. Martonen TB, Zhang Z, Yang Y. 1992a. Extrapolation modelling of aerosol deposition in human and laboratory rat lungs. Inhalation Toxicol 4: 303-324.
29. Martonen TB, Zhang Z, Yang Y. 1992b. Interspecies modeling of inhaled particle deposition patterns. J Aerosol Sci 23: 389.
30. Metrohm. 2009. Voltammetric determination of chromium in small quantities. Application bulletin 116. [cited 2009 September 18]. Available from: http://products.metrohm.com/Applications/ab-application-bulletins/ab-101-200/ prod-AB-116.asp x
31. Midander K, Pan J, Leygraf C. 2006. Elaboration of a test method for the study of metal release from stainless steel particles in artificial biological media. Corr Sci 48: 2855.
32. Midander K, Odnevall Wallinder I, Leygraf C. 2007.Metal release from stainless steel particles in vitro - influence of particle size. J Environ Monit 9: 74-81.
33. Miki M, Isawa T, Teshima T, Anazawa Y, Motomiya M. 1992. Difference in inhaled aerosol deposition patterns in the lungs due to three different sized aerosols. Nucl Med Commun 13: 553-562.
34. Moss OR. 1979. Stimulants of lung interstitial fluid. J Health Phys Soc 36: 447.
35. Norlin A, Pan J, Leygraf C. 2002. Investigation of interfacial capacitance of Pt, Ti and TiN coated electrodes by electrochemical impedance spectroscopy. Biomol Eng 19: 67.
36. Odnevall Wallinder I, Bertling S, Berggren Kleja D, Leygraf C. 2006. Corrosioninduced release and environmental interaction of chromium, nickel and iron from stainless steel. Water, Air, Soil Pollut 170: 17-35.
37. Okazaki Y, Gotoh E. 2005. Comparison of metal release from various metallic biomaterials in vitro. Biomaterials 26: 11.
38. Skeaff JMH, James M, Hardy DJ, King P. 2008. A new approach to the hazard classification of alloys based on transformation/dissolution. Integr Environ Assess Manag 4: 75-93.
39. Stockmann-Juvala H, Zitting A, Darrie G, Odnevall WI, Santonen T. 2009. Readacross approach in the risk assessment of ferrochromium. Case: Repeated dose toxicity. Toxicol Lett 189: S245.
40. Stopford W, Turner J, Cappellini D, Brock T. 2003. Bioaccessibility testing of cobalt compounds. J Environ Monit 5: 675-680.
41. Summer B, Fink U, Zeller R, Rueff F, Maier S, Roider G, Thomas P. 2007. Patch test reactivity to a cobalt-chromium-molybdenum alloy and stainless steel in metalallergic patients in correlation to the metal ion release. Contact Dermatitis 57:35-39.
42. Sundberg R, Jerlerud-Perez R. 2007. Dissolution/transformation tests of some epoxy mounted copper alloy samples-metallographic study after 7 days exposure. Västerås, Sweden: Scandinavian Copper Development Association. Internal report.
43. Teixeira F, Berjoan R, Peraudeau G, Perarnau D. 2005. Solar preparation of SiOx (x≈1) nanopowders from silicon vaporisation on a ZrO2 pellet. XPS and photoluminescence characterisation. Sol Energy 78: 763.
44. Ullmann Y. 2009. Fe- and Cr-based metal particles. Bioaccessibility studies from a human health and environmental perspective [M.S. Thesis]. Stockholm, Sweden: Royal Institute of Technology, KTH.
45. [UN] United Nations. 2003. The globally harmonized system of classification and labelling of chemicals. ST/SG/AC.10/30/Rev. 1. [cited 2009 September 18]. Available from: http://www.unece.org/trans/danger/publi/ghs/ghs- rev01/English/00e-intro.pdf
46. [UN] United Nations. 2005. The globally harmonized system of classification and labelling of chemicals, ST/SG/AC, 10/30/Rev. 1. [cited 2009 October 28]. Available from: www.unece.org/trans/danger/publi/ghs/ghs-rev01/ 01files-e.html