Development and optimization of a new formaldehyde-free cornstarch and tanninwood adhesive

European Journal of Wood and Wood Products

Volumn 68, Issue 2, 2010, Pages 167-177

  Moubarik, A ^a   Charrier, B ^a   Allal, A ^c   Charrier, F ^a   Pizzia, A ^b  

^a IUT des Pays de l'Adour   (France)

^b Ecole Nationale Supérieure des Technologies et Industries du Bois   (France)

^c UNIVERSITÉ DE PAU ET DES PAYS DE L'ADOUR   (France)

Author keywords

[No Author keywords available]

Indexed keywords

CHARACTERISATION; CURE TEMPERATURE; CURE TIME; ENVIRONMENT FRIENDLY; HEXAMINES; MECHANICAL AND PHYSICAL PROPERTIES; OPTIMIZED CONDITIONS; PHENOL-FORMALDEHYDE; SODIUM HYDROXIDE CONCENTRATION; SODIUM HYDROXIDES; TANNIN ADHESIVES; TOTAL SOLIDS; UREA FORMALDEHYDE; VOLUME RATIO; WOOD ADHESIVES; WOOD COMPOSITES;

ADHESIVES; CURING; FORMALDEHYDE; MECHANICAL PROPERTIES; OPTIMIZATION; PHENOLS; RESINS; SHEAR STRENGTH; SODIUM; STARCH; THERMOGRAVIMETRIC ANALYSIS; UREA;

UREA FORMALDEHYDE RESINS;

EID: 77954485439     PISSN: 00183768     EISSN: 1436736X     Source Type: Journal    
DOI: 10.1007/s00107-009-0357-6     Document Type: Article

References (34)

1. AFNOR (1996) Norme NF EN 113: Produits de pŕeservation du bois. Méthode d'essai pour déterminer l'efficacité protectrice vis-àvis les champignons basidiomycètes lignivores. Détermination du seuil d'efficacité
2. BS 1204: Part 2 (1965) Synthetic resin adhesives (phenolic and aminoplastic) for wood. Specification for close-contact adhesives British Standards Institution
3. Cardoso MB (2007) From rice starch to amylose crystals: alkaline extraction of rice starch, solution properties of amylose and crystal structure of v-amylose inclusion complexes. Université Joseph Fourier, Grenoble I
4. Cetin NS, Ozmen N (2002) Use of organosolv lignin in phenolformaldehyde resins for particleboard production. II. Particleboard production and properties. Int J Adhes Adhes 22:481-486 (Pubitemid 35460116)
5. Champagne ET, Rao RM, Liuzzo JA, Robinson W, Gale RJ, Miller F (1985) Solubility behaviors of the minerals, proteins, and phytic acid in rice bran with time, temperature, and pH. Cereal Chem 62:218-222
6. Conner AH (1989) Carbohydrates in adhesives: introduction and historical perspective. ACS Symp Ser 385:271-288
7. Conner AH, Lorenz LF, River BH (1989) Carbohydrate-modifiedphenol- formaldehyde resins formulated at neutral conditions. ACS Symp Ser 385:355-369
8. Custers PAJL, Rushbrook R, Pizzi A, Knauff CJ (1979) Industrial applications of wattle-tannin/urea-formaldehyde fortified starch adhesives for damp-proof corrugated cardboard. Holzforsch Holzverw 31(6):131-133
9. Imam SH, Mao L, Chen L, Greene RV (1999) Wood adhesive from crosslinked poly(vinyl alcohol) and partially gelatinized starch: preparation and properties. Starch/Stärke 51(6):225-229
10. Kamoun C, Pizzi A, Zanetti M (2003) Upgrading melamine-ureaformaldehyde polycondensation resins with buffering additives. I. The effect of hexamine sulfate and its limits. J Appl Polym Sci 90:203-214 (Pubitemid 37025021)
11. Keith IH, Telliard WI (1979) Priority pollutants. Environ Sci Technol 13:416-423
12. Kennedy HM (1989) Starch- and dextrin-based adhesives. In: Hemingway RW, Conner AH (eds) Adhesives from Renewable Resources. American Chemical Society, Washington, DC, pp 326-335
13. Leach VHW, Schoch TJ, Chessman EF (1961) Adsorption von Alkalien durch das Stärkekorn. Stärke 13(6):200-203
14. Li J, Maplesden F (1998) Commercial production of tannins from radiate pine bark for wood adhesives. IPENZ Transactions, Vol. 25, No. 1/EMCh, 1998
15. Li K, Geng X, Simonsen J, Karchesy J (2004) Novel wood adhesives from condensed tannins and polyethylenimine. Int J Adhes Adhes 24:327-333
16. McKenzie AW, Yuritta JP (1972) Starch tannin corrugating adhesives. Appita 26(1):30-34
17. Meyer B, Andrews BAK, Reinhardt RM (1986a) European formaldehyde regulations: a french view. In: Coutrot D (ed) Formaldehyde release from wood products. ACS Symp Ser 385:209-216
18. Meyer B, Andrews BAK, Reinhardt RM (1986b) Formaldehyde release from wood panel products bonded with phenol from aldehyde adhesives. In: Emery JA (ed) Formaldehyde release from wood products. ACS Symp Ser 385:26-39
19. Meyer B, Andrews BAK, Reinhardt RM (1986c) Formaldehyde release rate coefficients from selected consumer products. In: Pickrell JA, Griffis LC, Mokler BV, Hobbs CH, Kanapilly GM, Bathija A (eds) Formaldehyde release from wood products. ACS Symp Ser 385:40-51
20. Mozaffar AK, Sayed Marghoob A, Ved Prakash M (2004) Development and characterization of a wood adhesive using bagasse lignin. Int J Adhes Adhes 24:485-493
21. Myers GE (1986) Resin hydrolysis and mechanism of formaldehyde release from bonded wood products. In: Wood adhesives in 1985: status and needs. Forest products Research Society, Madison, WI, pp 77-80
22. Nihat SC, Nilgül ö (2002) Use of organosolv lignin in phenolformaldehyde resins for particleboard production. I. Organosolv lignin modified resins. Int J Adhes Adhes 22(6):477-480
23. Pichelin F, Kamoun C, Pizzi A (1999) Hexamine hardener behaviour: effects on wood glueing, tannin and other wood adhesives. Holz Roh- Werkst 57(5):305-317
24. Pizzi A (1977) Hot-setting tannin-urea-formaldehyde exterior wood adhesives. Adhes Age 20:27-35
25. Pizzi A (1994) Advanced wood adhesives technology. M. Dekker, New York
26. Pizzi A (2006) Recent developments in eco-efficient bio-based adhesives for wood bonding: opportunities and issues. J Adhes Sci Technol 20(8):829-846
27. Pizzi A, Tekely P (1995) Mechanism of polyphenolic tannin resin hardening by hexamethylenetetramine: CP-MAS 13C NMR. J Appl Polym Sci 56:1645-1650
28. Pizzi A, Tekely P (1996) Hardening mechanisms by hexamethylenetetramine of fast-reacting phenolic wood adhesives - a CPMAS 13C NMR study. Holzforschung 50:277-281
29. Pizzi A, Roll W, Dombo B (1996) Hitzehärtende Bindemittel. USA patent 5,532,330
30. Saayman HM, Brown CH (1977) Wattle-base tannin-starch adhesives for corrugated containers. For Prod J 27(4):21-25
31. Tako M, Hizukuri S (2002) Gelatinization mechanism of potato starch. Carbohyd Res 48:397-401
32. Thompson GE (1991) Demethyllated kraft lignin as a substitute for phenol in wood adhesives. M.Sc. Thesis. Colorado State University
33. Yamamoto H, Makita E, Oki Y, Otani M (2006) Flow characteristics and gelatinization kinetics of rice starch under strong alkali conditions. Food Hydrocoll 20:9-20
34. Yazaki Y, Collins PJ (1997) Uses of Wattle Extract: Tannin Based Adhesives. Rural Industries Research and Development Corporation. RIRDC Publication No 97/72, Chapt 15, pp 127-143