SBR/silica composites modified by a polymerizable protic ionic liquid

Polymer Journal

Volumn 42, Issue 7, 2010, Pages 555-561

  Lei, Yanda ^a   Tang, Zhenghai ^a   Guo, Baochun ^a   Jia, Demin ^a  

^a SOUTH CHINA UNIVERSITY OF TECHNOLOGY   (China)

Author keywords

interface; ionic liquid; rubber; silica

Indexed keywords

CURING BEHAVIOR; FUNCTIONALIZED; HYDROGEN BONDINGS; INTERFACE; INTERFACIAL INTERACTION; MECHANICAL PERFORMANCE; MOONEY VISCOSITY; PAYNE-EFFECTS; RUBBER COMPOUNDS; SORBATES; VULCANIZATES;

CURING; DISPERSIONS; HYDROGEN; HYDROGEN BONDS; IONIC LIQUIDS; IONS; MECHANICAL PROPERTIES; RUBBER; SILICA;

IONIZATION OF LIQUIDS;

EID: 77954323504     PISSN: 00323896     EISSN: 13490540     Source Type: Journal    
DOI: 10.1038/pj.2010.43     Document Type: Article

References (54)

1. Zhuravlev, L. T. The surface chemistry of amorphous silica. Zhuravlev Model. Colloids Surf. A 173, 1-38 (2000).
2. Wolf, S. & Wang, M. J. Filler-elastomer interactions. Part IV. The effect of the surface energies of fillers on elasmomer reinforcement. Rubber Chem. Technol. 65, 329-342 (1992).
3. Wang, M. J., Morris, M. D. & Kutsovsky, Y. Effect of fumed silica surface area on silicone rubber reinforcement. Kautsch. Gummi Kunstst. 61, 107-117 (2008).
4. Wang, M. J. & Wolf, S. Filler-elastomer interactions. Part V. Investigation of the surface energies of silane-modified silicas. Rubber Chem. Technol. 65, 715-735 (1992).
5. Jesionowski, T. & Krysztafkiewicz, A. Influence of silane coupling agents on surface properties of precipitated silicas. Appl. Surf. Sci. 172, 18-32 (2001).
6. Wang, M. J. Effect of polymer-filler and filler-filler interactions on dynamic properties of filled vulcanizates. Rubber Chem. Technol. 71, 519-589 (1997).
7. Liu, Y. H., Lin, H. P. & Mou, C. Y. Direct method for surface silyl functionalization of mesoporous silica. Langmuir 20, 3231-3239 (2004).
8. Rao, A. V., Kulkarni, M. M., Amalnerkar, D. P. & Seth, T. Surface chemical modification of silica aerogels using various alkyl-alkoxy/chloro silanes. Appl. Surf. Sci. 206, 262-270 (2003).
9. Earle, M. J., McCormac, P. B. & Seddon, K. R. Diels-Alder reactions in ionic liquids: a safe recyclable alternative to lithium perchlorate-diethyl ether mixtures. Green Chem. 1, 23-25 (1999).
10. Huddleston, J. G., Visser, A. E., Reichert, W. M., Willauer, H. D., Broker, G. A. & Rogers, R. D. Characterization and comparison of hydrophilic and hydrophobic room temperature ionic liquids incorporating the imidazolium cation. Green Chem. 3, 156-164 (2001).
11. Fuller, J., Carlin, R. T. & Osteryoung, R. A. The room temperature ionic liquid 1-ethyl- 3-methylimidazolium tetrafluoroborate: electrochemical couples and physical properties. J. Electrochem. Soc. 144, 3881-3886 (1997).
12. Fukushima, T., Kosaka, A., Ishimura, Y., Yamamoto, T., Takigawa, T., Ishii, N. & Aida, T. Molecular ordering of organic molten salts triggered by single-walled carbon nanotubes. Science 300, 2072-2074 (2003).
13. Wu, B. H., Hu, D., Kuang, Y. J., Liu, B., Zhang, X. H. & Chen, J. H. Functionalization of carbon nanotubes by an ionic-liquid polymer: dispersion of Pt and PtRu nanoparticles on carbon nanotubes and their electrocatalytic oxidation of methanol. Angew. andte Chem. Int. Ed. 48, 4751-4754 (2009).
14. Scheeren, C. W., Machado, G., Dupont, J., Fichtner, P. F. & Texeira, S. R. Nanoscale Pt(0) particles prepared in imidazolium room temperature ionic liquids: synthesis from an organometallic precursor, characterization, and catalytic properties in hydrogenation reactions. Inorg. Chem. 42, 4738-4742 (2003).
15. Nakashima, T. & Kimizuka, N. Interfacial synthesis of hollow TiO2 micropheres in ionic liquids. J. Am. Chem. Soc. 125, 6386-6387 (2003).
16. Li, Z. H., Liu, Z. M., Zhang, J. L., Han, B. X., Du, J. M., Gao, Y. N. & Jiang, T. Synthesis of single-crystal gold nanosheets of large size in ionic liquids. J. Phys. Chem. B 109, 14445-14448 (2005).
17. Zhou, Y. & Antonietti, M. A series of highly ordered, super-microporous, lamellar silicas prepared by nanocasting with ionic liquids. Chem. Mater. 16, 544-550 (2004).
18. Trewyn, B. G., Whitman, C. M. & Lin, V. S. Morphological control of room-temperature ionic liquid templated mesoporous silica nanoparticles for controlled release of antibacterial agents. Nano lett. 4, 2139-2143 (2004).
19. Zhang, J., Ma, Y. B., Shi, F., Liu, L. Q. & Deng, Y. Q Room temperature ionic liquids as templates in the synthesis of mesoporous silica via a sol-gel method. Microporous Mesoporous Mater. 119, 97-103 (2009).
20. Zhou, Y., Schattka, J. H. & Antonietti, M. Room-temperature ionic liquids as template to monolithic mesoporous silica with wormlike pores via a sol-gel nanocasting technique. Nano Lett. 4, 477-481 (2004).
21. Guo, B. C., Liu, X. L., Lei, Y. D. & Jia, D. M. Adsorption of ionic liquid onto halloysite nanotubes: mechanism and reinforcement of the modified clay to rubber. J. Macromol. Sci., Phys. (accepted).
22. Dupont, J. & Suarezb, P. A. Physico-chemical processes in imidazolium ionic liquids. Phys. Chem. Chem. Phys. 8, 2441-2452 (2006).
23. Winterton, N. Solubilization of polymers by ionic liquids. J. Mater. Chem. 16, 4281-4293 (2006).
24. Marwanta, E., Mizumo, T., Nakamura, N. & Ohno, H. Improved ionic conductivity of nitrile rubber/ionic liquid composites. Polymer 46, 3795-3800 (2005).
25. Guo, B. C., Chen, F., Lei, Y. D., Liu, X. L., Wan, J. J. & Jia, D. M. Styrene-butadiene rubber/halloysite nanotubes nanocomposites modified by sorbic acid. Appl. Surf. Sci. 255, 7329-7336 (2009).
26. Guo, B. C., Chen, F., Lei, Y. D. & Jia, D. M. Tubular clay composites with high strength and transparency. J. Macromol. Sci., Part B: Phys. 49, 111-121 (2010).
27. Guo, B. C., Chen, F., Lei, Y. D. & Chen, W. W. Significantly improved performance of rubber/silica composites by addition of sorbic acid. Polym. J. 42, 319-326 (2010).
28. Belieres, J. P. & Angell, C. A. Protic ionic liquids: Preparation, characterization, and proton free energy level representation. J. Phys. Chem. B 111, 4926-4937 (2007).
29. Nakamoto, H. & Watanabe, M. Bronsted acid-base ionic liquids for fuel cell electrolytes. Chem. Commun. 24, 2539-2541 (2007).
30. Johansson, K. M., Izgorodina, E. I., Forsyth, M., MacFarlane, D. R. & Seddon, K. R. Protic ionic liquids based on the dimeric and oligomeric anions: (AcO)(x)Hx-1(-). Phys. Chem. Chem. Phys. 10, 2972-2978 (2008).
31. Fernicola, A., Panero, S. & Scrosati, B. Proton-conducting membranes based on protic ionic lquids. J. Power Sources 178, 591-595 (2008).
32. Pernak, J., Goc, I. & Mirska, I. Antimicrobial activities of protic ionic liquids with lactate anion. Green Chem. 6, 323-329 (2004).
33. Baca, S. G., Filippova, I. G., Gherco, O. A., Gdaniec, M., Simonov, Y. A., Gerbeleu, N. V., Franz, P., Basler, R. & Decurtins, S. Nickel(II), Cobalt(II), Copper(II), and Zinc(II)-phthalate and 1-methylimidazole coordination compounds: synthesis, crystal structures and magnetic properties. Inorg. Chim. Acta 357, 3419-3429 (2004).
34. Chu, S. D., Hawes, J. W. & Lorigan, G. A. Solid-state NMR spectroscopic studies on the interaction of sorbic acid with phospholipid membranes at different pH levels. Magn. Reson. Chem. 47, 651-657 (2009).
35. Nakamoto, H., Noda, A., Hayamizu, K., Hayashi, S., Hamaguchi, H. & Watanabe, M. Proton-conducting properties of a bronsted acid-base ionic liquid and ionic melts consisting of bis(trifluoromethanesulfonyl)imide and benzimidazole for fuel cell electrolytes. J. Phys. Chem. C 111, 1541-1548 (2007).
36. Rajkumar, T. & Rao, G. R. Synthesis and characterization of hybrid molecular material prepared by ionic liquid and silicotungstic acid. Mater. Chem. Phys. 112, 853-857 (2008).
37. Jerman, I., Jovanovski, V., Surca Vuk, A., Hoeevar, S. B., Gaberseek, M., Jesih, A. & Orel, B. Ionic conductivity, infrared and raman spectroscopic studies of 1-methyl- 3-propylimidazolium iodide ionic liquid with added iodine. Electrochim. Acta 53, 2281-2288 (2008).
38. Surca Vuka, A., Jovanovskia, V., Pollet-Villardb, A., Jermana, I. & Orela, B. Imidazolium- based ionic liquid derivatives for application in electrochromic devices. Sol. Energy Mater. Sol. Cells 92, 126-135 (2008).
39. Doiuchi, T., Dodoh, T. & Yamaguchi, H. Asymmetric radical polymerization of (-)-3-p-menthyl sorbate. Makromol. Chem. 191, 1253-1260 (1990).
40. Weng, Y. M., Chen, M. J. & Chen, W. Antimicrobial food packaging materials from poly(ethylene-co-methacrylic acid). Food Sci. Technol. 32, 191-195 (1999).
41. Watts, J. F. & Wolstenholme, J. An introduction to surface analysis by XPS and AES. Chapter 5, 149-156 (2003).
42. Guo, B. C., Lei, Y. D., Chen, F., Liu, X. L., Du, M. L. & Jia, D. M. Styrene-butadiene rubber/halloysite nanotubes nanocomposites modified by methacrylic acid. Appl. Surf. Sci. 255, 2715-2722 (2008).
43. Paparazzo, E. On the XPS analysis of Si-OH groups at the surface of silica. Surf. Interface Anal. 24, 729-730 (1996).
44. Payne, A. R. The dynamic properties of carbon black-loaded natural rubber vulcanizates. II. J. Appl. Polym. Sci. 6, 368-372 (1962).
45. Null, V. Safe process oils for tires with low environmental impact. Kautsch. Gummi Kunstst. 52, 799-805 (1999).
46. Ishizaki, M. & Matsutani, Y. High damping rubber composition for damping component, is formed by mixing softener chosen from liquid rubber, paraffin and naphthene oil, rubber base, silane compound, carbon black and silica, each having content of preset range. JP2009030016-A (2009).
47. Lin, Y. C., Lee, W. J., Chen, S. J., Chang-Chien, G. P. & Tsai, P. J. Characterization of PAHs exposure in workplace atmospheres of a sinter plant and health-risk assessment for sintering workers. J. Hazard. Mater. 158, 636-643 (2008).
48. Matsumoto, A., Nagahama, S. & Odani, T. Design and polymer structure control based on polymer crystal engineering. topochemical polymerization of 1,3-diene mono- and dicarboxylic acid derivatives bearing a naphthylmethylammonium group as the countercation. J. Am. Chem. Soc. 122, 9109-9119 (2000).
49. Taketani, S. & Matsumoto, A. Facile synthesis of a degradable gel by radical copolymerization of vinyl sorbate and molecular oxygen. Macromol. Chem. Phys. 205, 2451-2456 (2004).
50. Yamaguchi, H., Tetsuroh, I., Toshio, H. & Doiuchi, T. Asymmetric induction polymerization of monomer salts prepared from 1,3-butadiene-l- carboxylic acid and optically active amines. Makromol. Chem. 191, 1243-1251 (1990).
51. Yu, J. J. & Ryu, S. H. Ultraviolet-initiated photografting of glycidyl methacrylate onto styrene-butadiene rubber. J. Appl. Polym. Sci. 73, 1733-1739 (1999).
52. Romero-Sanchez, M. D., Pastor-Blas, M. M. & Martin-Martinez, J. M. Adhesion improvement of SBR rubber by treatment with trichloroisocyanuric acid solutions in different esters. Int. J. Adhes. Adhes. 21, 325-337 (2001).
53. Innocenzi, P. Infrared spectroscopy of sol-gel derived silica-based films: a spectramicrostructure overview. J. Non-Cryst. Solids 316, 309-319 (2003).
54. Sato, K. Ionic crosslinking of carboxylated SBR. Rubber Chem. Technol. 56, 942-958 (1983).