Influence of steel-concrete interface condition on galvanic corrosion currents in carbonated concrete

Corrosion Science

Volumn 52, Issue 9, 2010, Pages 2878-2890

  Nasser, A ^a   Clement A ^a   Laurens, S ^a   Castel, A ^a  

^a UNIVERSITÉ PAUL SABATIER   (France)

Author keywords

A. Concrete; B. Modelling studies; C. Alkaline corrosion; C. Interfaces

Indexed keywords

ALKALINE CORROSION; C. ALKALINE CORROSION; CARBONATED CONCRETES; CONCRETE CARBONATION; CORROSION LEVELS; CORROSION PROCESS; ELECTRICAL COUPLING; FEM SIMULATIONS; GALVANIC CORROSION; GALVANIC CURRENT; INITIATION TIME; MACRO CELLS; MACRO-CELL CORROSION; MACROCELL CORROSION RATE; MODELLING STUDIES; REALISTIC CONDITIONS; STEEL-CONCRETE; STEEL-CONCRETE INTERFACE;

CARBONATION; EXPERIMENTS; FINITE ELEMENT METHOD;

CORROSION RATE;

EID: 77953962008     PISSN: 0010938X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.corsci.2010.04.037     Document Type: Article

References (24)

1. Pourbaix M. Atlas of Electrochemical Equilibria in Aqueous Solution (1966), Pergamon, Brussel
2. D. Beckett, Influence of carbonation and chlorides on concrete durability, Concrete, February 1983, pp. 16-18.
3. Glass G.K., Page C.L., and Short N.R. Factors affecting the corrosion rate of steel in carbonated mortars. Corros. Sci. 32 (1991) 1283-1294
4. Castel A., François R., and Arliguie G. Effect of loading on carbonation penetration in reinforced concrete members. Cem. Concr. Res. 29 (1999) 561-565
5. Andrade C., Garcés P., and Martínez I. Galvanic currents and corrosion rates of reinforcements measured in cells simulating different pitting areas caused by chloride attack in sodium hydroxide. Corros. Sci. 50 (2008) 2959-2964
6. Castel A., Vidal T., François R., and Arliguie G. Influence of steel-concrete interface quality on reinforcement corrosion induced by chlorides. Mag. Concr. Res. 55 2 (2003) 151-160
7. Soylev T.A., and François R. Quality of steel-concrete interface and corrosion of reinforcing steel. Cem. Concr. Res. 33 9 (2003) 1407-1415
8. A. Castel, R. François, G. Arliguie, Factors other than chloride level influencing corrosion rate of reinforcement, in: V.M. Malhotra (Ed.), CANMET/ACI Int. Conf. on Durability of Concrete, A.C.I. SP-192, vol.1, Barcelona, 2000, pp. 629-644.
9. Mohammed T.U., Otsuki N., and Hisada M. Corrosion of steel bars with respect to orientation in concrete. ACI Mater. J. 96 2 (1999) 154-159
10. G.K. Glass, B. Reddy, The influence of the steel-concrete interface on the risk of chloride induced corrosion initiation, COST 521: Final Single Project Reports, UK6, 2002, pp. 227-232.
11. Yonezawa T., Ashworth V., and Procter R.P.M. Pore solution composition and chloride effects on the corrosion of steel in concrete. Corros. Eng. 44 7 (1988) 489-499
12. Horne A.T., Richardson I.G., and Brydson R.M.D. Quantitative analysis of the microstructure of interfaces in steel reinforced concrete. Cem. Concr. Res. 37 (2007) 1613-1623
13. Glass G.K., Yang R., Dickhaus T., and Buenfeld N.R. Backscattered electron imaging of the steel-concrete interface. Corros. Sci. 43 (2001) 605-610
14. Page C.L. Initiation of chloride-induced corrosion of steel in concrete: role of the interfacial zone. Mater. Corros. 60 8 (2009) 586-592
15. C.A. Menzel, Effect of Settlement of Concrete on Results of Pull-Out Bond Tests, Research Department Bulletin 41, Portland Cement Association, Chicago, November 1952, pp. 49.
16. Dohaney R.C., and Darwin D. Bond of top-cast bars in bridge decks. ACI J. Proc. 82 1 (1985) 57-66
17. Jeanty P.R., Mitchell D., and Mirza M.S. Investigation of top bar effects in beams. ACI Struct. J. 85 3 (1988) 251-257
18. Castel A., Vidal T., Viriyametanont K., and François R. Effect of reinforcing bar orientation and location on bond with self-compacting concrete. ACI Struct. J. 3 4 (2006) 559-567
19. Warkus J., Raupach M., and Gulikers G. Numerical modelling of corrosion - theoretical backgrounds. Mater. Corros. 57 8 (2006) 614-617
20. Gulikers J., and Raupach M. Numerical models for the propagation period of reinforcement corrosion - comparison of a case study calculated by different researchers. Mater. Corros. 57 8 (2006) 618-627
21. Warkus J., and Raupach M. Modelling of reinforcement corrosion - corrosion with extensive cathodes. Mater. Corros. 57 12 (2006) 920-925
22. Stern M., and Geary A.L. A theoretical analysis of the shape of polarization curves. J. Electrochem. Soc. 104 (1957) 56-63
23. Andrade C., and Alonso C. On-site measurements of corrosion rate of reinforcements. Constr. Build. Mater. 15 (2001) 141-145
24. RILEM TC 154-EMC. Test methods for on-site corrosion rate measurement of steel reinforcement in concrete by means of the polarization resistance method. Mater. Struct. 37 (2004) 623-643