Experimental and finite element study on the spring back of double curved aluminum/polypropylene/aluminum sandwich sheet

Materials and Design

Volumn 31, Issue 9, 2010, Pages 4174-4183

  Parsa, M H ^a   ahkami, S Nasher al ^a   Ettehad, M ^b  

^a UNIVERSITY OF TEHRAN   (Iran)

^b Department of Electrical and Computer Engineering   (United States)

Author keywords

B. Laminates; C. Stamping and punching; F. Elastic behavior

Indexed keywords

ELASTIC RECOVERY; EMERGING MATERIALS; EXPLICIT FINITE ELEMENTS; F. ELASTIC BEHAVIOR; FINITE-ELEMENT STUDY; FORMING PROCESS; GEOMETRICAL PARAMETERS; METAL POLYMERS; NUMERICAL SIMULATION; POTENTIAL APPLICATIONS; SHEET MATERIAL; SIDE WALLS; SPRING BACK; STAMPING AND PUNCHING;

COMPUTER SIMULATION; LAMINATES; METAL RECOVERY; PUNCHING; STAMPING; THERMOELECTRICITY; UNLOADING;

PAPER SHEETING;

EID: 77953540706     PISSN: 02641275     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matdes.2010.04.024     Document Type: Article

References (50)

1. Kopp R., Nutzmann M., Van Santen J. Formability of lightweight, vibration damping and medium perfused sandwich sheets, analysis through practical experiments and FEM-simulations. Sandwich structures 7: advancing with sandwich structures and materials 2005, 723-732. Springer. O.T. Thomsen (Ed.).
2. Kim K.J., Kim D., Cohi S.H., Chung K., Barlat F., Shin K.S., et al. Formability of AA5182/polypropylene/AA5182 sandwich sheets. J Mater Process Technol 2003, 193:1-7.
3. Ruokolainen R.B., Sigler D.R. The effect of adhesion and tensile properties on the formability of laminated steels. J Mater Eng Perform 2008, 17(3):330-339.
4. Chao C.K., Liu C.H., Wu H.J. A study of the stretching process of steel-polymer-steel laminate. J Mater Process Technol 1994, 40:155-172.
5. Huang Y.M., Leu D.K. Finite-element simulation of the bending process of steel/polymer/steel laminate sheet. J Mater Process Technol 1995, 52(3):319-337.
6. Gardiner F.J. The spring back of metals. Trans ASME 1957, 79:33-42.
7. Queener C.A., De Angelis R.J. Elastic spring back and residual stresses in sheet metal formed by bending. Trans ASME 1968, 61:757-768.
8. Ferreira J.A., Sun P., Grácio J.J. Close loop control of a hydraulic press for spring back analysis. J Mater Process Technol 2006, 177:377-381.
9. Morestin F., Boivin B. On the necessity of taking into account the variation in the Young modulus with plastic strain in elastic-plastic software. Nucl Eng Des 1996, 162(1):107-116.
10. Cleveland R.M., Ghosh A.K. Inelastic effects on spring back in metals. Int J Plast 2002, 18(5-6):769-785.
11. Leu D.K. A simplified approach for evaluating bendability and spring back in plastic bending of anisotropic sheet materials. J Mater Process Technol 1997, 66(1-3):9-17.
12. Geng L., Wagoner R.H. Role of plastic anisotropy and its evolution on spring back. Int J Mech Sci 2002, 44(1):123-148.
13. Papeleux L., Ponthot J.P. Finite element simulation of spring back in sheet metal forming. J Mater Process Technol 2002, 125-126:785-791.
14. Wang C., Kinzel G., Altan T. Mathematical modeling of plane-strain bending of sheet and plate. J Mater Process Technol 1993, 39(3-4):279-304.
15. Clausen A.H., Hopperstad O.S., Langseth M. Sensitivity of model parameters in stretch bending of aluminium extrusions. Int J Mech Sci 2001, 43(2):427-453.
16. Gau J.T., Kinzel G.L. A new model for spring back prediction in which the bauschinger effect is considered. Int J Mech Sci 2001, 43(8):1813-1832.
17. Yoshida F., Uemori T. A model of large-strain cyclic plasticity and its application to spring back simulation. Int J Mech Sci 2003, 45(10):1687-1702.
18. Tekaslan O., Gerger N., Seker U. Determination of spring-back of stainless steel sheet metal in ''V'' bending dies. Mater Des 2008, 29:1043-1050.
19. Thipprakmas S., Rojananan S. Investigation of spring-go phenomenon using finite element method. Mater Des 2008, 29:1526-1532.
20. Bakhshi-Jooybari M., Rahmani B., Daeezadeh V., Gorji A. The study of spring-back of CK67 steel sheet in V-die and U-die bending processes. Mater Des 2009, 30:2410-2419.
21. Tang B., Lu X., Wang Z., Zhao Z. Spingback investigation of anisotropic aluminum alloy sheet with a mixed hardening rule and Barlat yield criteria in sheet metal forming. Mater Des 2010, 31:2043-2050.
22. Xue P., Yu T.X., Chu E. Theoretical prediction of the spring back of metal sheets after a double-curvature forming operation. J Mater Process Technol 1999, 89-90:65-71.
23. Asnafi N. On spring back of double-curved autobody panels. Int J Mech Sci 2001, 43:5-37.
24. Xue P., Yu T.X., Chu E. An energy approach for predicting spring back of metal sheets after double-curvature forming - part I: axisymmetric stamping. Int J Mech Sci 2001, 43:1893-1914.
25. Xue P., Yu T.X., Chu E. An energy approach for predicting spring back of metal sheets after double-curvature forming - part II: unequal double curvature forming. Int J Mech Sci 2001, 43:1915-1924.
26. Huang M., Gerdeen J.C. Spring back of doubly curved developable sheet metal surface - an overview. SAE Tech Rep 1994, 718-728.
27. Parsa MH, Kazemi M. A Method for simulation of spring back in double curved sheet metals. In: Juster N, Rosochowskei A, editors. Proceeding of the 9th international conferences on material forming, ESAFORM UK; 2006. p. 411-4.
28. Parsa MH, Kazemi M, Pishbin MH. Study the effect of curvature on spring back of double curved steel sheet using new method. In: Cesar de Sa JMA, Santos Abel, editors. Proceeding of the 9th international conference on numerical methods in industrial forming processes, NUMIFORM, Portugal; 2007. p. 901-6.
29. Ito K., Kasajima M., Furuya S. Bending and spring back theory of metal-polymer sandwich laminates. J Macromol Sci Phys 1981, B19(4):773-791.
30. Kim J.K., Thomson P.F. Forming behavior of sheet steel laminate. J Mater Process Technol 1990, 22:45-64.
31. Yuen W.Y.D. A generalized solution for the prediction of spring back in laminated strip. J Mater Process Technol 1996, 61:254-264.
32. Takiguchci M., Yoshida F. Plastic bending of adhesive bonded sheet metals. J Mater Process Technol 2001, 113:743-748.
33. Takiguchci M., Yoshida F. Analysis of plastic bending of adhesive-bonded sheet metals taking account of viscoplasticity of adhesive. J Mater Process Technol 2003, 140:441-446.
34. Li G., Kang Y. FEM simulation of bending formability for laminate steel/resin/steel lightweight composite sheet. J Mater Sci Technol 2003, 19(4):324-326.
35. Mohr D. On the role of shear strength in sandwich sheet forming. Int J Solid Struct 2005, 42:1491-1512.
36. Liu L., Wang J. Modeling spring back of metal-polymer-metal laminates. J Manuf Sci Eng 2004, 126:599-604.
37. Weiss M., Rolfe B.F., Dingle M., Duncan J.L. Elastic bending of steel-polymer-steel (sps) laminates to a constant curvature. Trans ASME 2006, 73:574-579.
38. Weiss M., Dingle M.E., Rolfe B.F., Hodgson P.D. The influence of temperature on the forming behavior of metal/polymer laminates in sheet metal forming. Trans ASME 2007, 126:530-537.
39. Lee S.W., Yoon J.W., Yang D.Y. Comparative investigation into the dynamic explicit and the static implicit method for spring back of sheet metal stamping. Eng Comput 1999, 16(3):347-373.
40. Wagoner R. Sheet springback. Continuum scale simulation of engineering materials: fundamentals-microstructures-process applications 2004, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim (Germany), [chapter 42]. D. Raabe, F. Roters, F. Barlat, L.Q. Chen (Eds.).
41. Park D.W., Oh S.I. A four-node shell element with enhanced bending performance for spring back analysis. Comput Meth Appl Mech Eng 2004, 193:2105-2138.
42. Schönbach E., Glanzer G., Kubli W., Selig M. Simulation of secondary operations and spring back - the implicit shell provides a precise and rapid solution. Advanced methods in material forming 2007, Springer, Berlin Heidelberg, [chapter 21]. B. Dorel (Ed.).
43. Sala G. A Numerical and experimental approach to optimise sheet stamping technologies - part I: mild steel press-forming. Mater Des 2001, 22:285-298.
44. Oniate E, Rojek J. Prediction of elastic spring back deflects in sheet stamping processes using finite element methods. In: Predeleanu M, Gilormini P, editors. Advanced methods in materials processing defects. Elsevier Science BV; 1997. p. 349-59.
45. Xr W.L., Ma C.H., Li C.H., Feng W.J. Sensitive factors in spring back simulation for sheet metal forming. J Mater Process Technol 2004, 151:217-222.
46. Padmanabhan R, Oliveira MC, Baptista AJ, Alves JL, Menezes LF. Study on the influence of the refinement of a 3-D finite element mesh in spring back evaluation of plane-strain channel sections. In: Cesar de Sa JMA, Santos Abel, editors. Proceeding of the 9th international conference on numerical methods in industrial forming processes, NUMIFORM, Portugal; 2007. p. 847-52.
47. Prior A.M. Applications of implicit and explicit finite element techniques to metal forming. J Mater Process Technol 1994, 45:649-656.
48. Abaqus/explicit: user's examples and theory manuals. Dassault systèmes; 2007.
49. Parsa MH, Ettehad M. Prediction of delamination during deep-drawing of steel-polymer-steel sandwich sheet material. In: Yang DY, editor. Proceeding of the 9th international conference on technology of plasticity, Korea; 2008. p. 980-5.
50. Kim S.Y., Choi W.J., Park S.Y. Spring-back characteristics of fiber metal laminate (GLARE) in brake forming process. Int J Adv Manuf Technol 2007, 32:445-451.