Microscopic observation of laser glazed yttria-stabilized zirconia coatings

Applied Surface Science

Volumn 256, Issue 21, 2010, Pages 6213-6218

  Morks, M F ^a   Berndt, C C ^a   Durandet, Y ^a   Brandt, M ^b   Wang, J ^a  

^a SWINBURNE UNIVERSITY OF TECHNOLOGY   (Australia)

^b RMIT UNIVERSITY   (Australia)

Author keywords

Laser glazing; Microstructure; Plasma spraying; Thermal barrier coating; Vickers hardness; YSZ

Indexed keywords

GAS TURBINES; GLAZES; GRAIN BOUNDARIES; HIGH TEMPERATURE CORROSION; LASER BEAMS; MICROSTRUCTURE; PLASMA JETS; PLASMA SPRAYING; SCANNING ELECTRON MICROSCOPY; SPRAYED COATINGS; THERMAL INSULATION; THERMAL SPRAYING; VICKERS HARDNESS; YTTRIA STABILIZED ZIRCONIA; YTTRIUM ALUMINUM GARNET; YTTRIUM OXIDE; ZIRCONIA;

DIFFERENT OPERATING CONDITIONS; INSULATION SYSTEM; LASER GLAZING; METALLIC COMPONENT; MICROSCOPIC OBSERVATIONS; THERMAL BARRIER COATING (TBCS); YTTRIA STABILIZED ZIRCONIA COATINGS; YTTRIA-STABILIZED ZIRCONIAS (YSZ);

THERMAL BARRIER COATINGS;

EID: 77953137902     PISSN: 01694332     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.apsusc.2010.03.143     Document Type: Article

References (43)

1. Stecura S. Two layer thermal barrier coating for high temperature components. Am. Ceram. Soc. Bull. 56 (1977) 1082-1085
2. Liebert C.H., et al. Durability of Zirconia Thermal-Barrier Ceramic Coatings on Air-Cooled Turbine Blades in Cyclic Jet Engine Operation (1976), NASA TM X-3410, National Aeronautics and Space Administration
3. Assanis D.N. Thin thermal barrier coatings for internal combustion engine components. Int. J. Mater. Prod. Technol. 4 3 (1989) 232-243
4. Gleeson B. Thermal barrier coatings for aeroengine applications. J. Propul. Power 22 (2006) 375-383
5. Meier S.M., Gupta D.K., and Sheffler K.D. J. Met. 43 (1991) 50-53
6. Jones R.L. In: Stern K.H. (Ed). Metallurgical and Ceramic Coatings (1996), Chapman and Hall, London, UK 194
7. Evans A.G., Mumm D.R., Hutchinson J.W., Meier G.H., and Pettit F.S. Prog. Mater. Sci. 46 (2001) 505-553
8. Wang Z., Kulkarni A., Deshpande S., Nakamura T., and Herman H. Effects of pores and interfaces on effective properties of plasma sprayed zirconia coatings. Acta Mater. 51 (2003) 5319-5334
9. Lima C.R.C., and Guilemany J.M. Adhesion improvements of thermal barrier coatings with HVOF thermally sprayed bond coats. Surf. Coat. Technol. 201 (2007) 4694-4701
10. Shillington E.A.G., and Clarke D.R. Spalling failure of a thermal barrier coating associated with aluminum depletion in the bond-coat. Acta Mater. 47 (1999) 1297-1305
11. Mumm D.R., and Evans A.G. On the role of imperfections in the failure of a thermal barrier coating made by electron beam deposition. Acta Mater. 48 (2000) 1815-1827
12. Schulz U., Menzebach M., Leyens C., and Yang Y.Q. Influence of substrate material on oxidation behavior and cyclic lifetime of EB-PVD TBC systems. Surf. Coat. Technol. 146 (2001) 117-123
13. Strauss D., Muller G., Schumacher G., Engelko V., Stamm W., Clemens D., and Quaddakers W.J. Oxide scale growth on MCrAlY bond coatings after pulsed electron beam treatment and deposition of EBPVD-TBC. Surf. Coat. Technol. 135 (2001) 196-201
14. Haynes J.A., Ferber M.K., Porter W.D., and Rigney E.D. Characterization of alumina scales formed during isothermal and cyclic oxidation of plasma-sprayed TBC systems at 1150 8C. Oxid. Met. 52 (1999) 31-76
15. Pint B.A., Wright I.G., Lee W.Y., Zhang Y., and Prüssner K.B. Alexander, Substrate and bond coat compositions: factors affecting alumina scale adhesion. Mater. Sci. Eng. A 245 (1998) 201-211
16. 3 interlayer on residual stress due to oxide scale in thermal barrier coatings. Surf. Coat. Technol. 153 (2002) 16-24
17. Chang K.C., Wei W.J., and Chen C. Surf. Coat. Technol. 102 (1998) 197-204
18. Zaplatynsky I. Thin Solid Films 95 (1982) 275
19. 3 )/(Ni-22 wt.%Cr-10 wt.%Al-1 wt.%Y) thermal barrier coatings in cyclic oxidation tests. Surf. Coat. Technol. 71 (1995) 53-59
20. Ouyang J.H., and Sasaki S. Tribol. Int. 35 4 (2002) 255-264
21. Khor K.A., and Jana S. J. Mater. Process. Technol. 66 (1997) 4-8
22. 2 coatings. In: Lugscheider E. (Ed). Proceedings of International Thermal Spray Conference (2002). 4-6 March, Essen, Germany, Tagungsband Conference Proceedings (2002), DVS, Deutscher Verband für Schweißen, Germany
23. Yuanzheng Y., Youlan Z., Zhengyl L., and Yuzhi C. Mater. Sci. Eng. A 291 (2000) 168-172
24. Teixeira M., Andritschky H., Gruhn W., Mallener H.P., Buchkremer D., and Stover. J. Therm. Spray Technol. 9 2 (2000) 191-197
25. Gruhn H., Heidinger R., Rohde M., Rüdiger S., Schneider J., and ZumGahr K.-H. Process modelling of the laser induced surface modification of ceramic substrates for thermal and electrical lines in microsystems. In: Kumar D., Norton D.P., Lee C.B., Ebihara K., and Xi X. (Eds). Laser-Solid Interactions for Materials Processing (2000), Materials Research Society, Warrendale, PA, USA 531-536
26. Ouyang J.H., Nowotny S., Ritcher A., and Beyer E. Ceram. Int. 27 (2001) 15-24
27. Sivakumar R., and Mordike B.L. Surf. Eng. 4 2 (1988) 127-140
28. Antou G., Montavon G., Hlawka F., Cornet A., Coddet C., and Machi F. Modification of ceramic thermal spray deposit microstructures implementing in situ laser remelting. Surf. Coat. Technol. 172 (2003) 279-290
29. Miller R.A., and Berndt C.C. Performance of thermal barrier coatings in high heat flux environments. Thin Solid Films 119 (1984) 195-202
30. Petitbon A., Boquet L., and Delsart D. Laser surface sealing and strengthening of zirconia coatings. Surf. Coat. Technol. 49 (1991) 57-61
31. Jones R.L. Some aspects of the hot corrosion of thermal barrier coatings. J. Therm. Spray Technol. 6 1 (1997) 77-84
32. Gurrappa I. Thermal barrier coatings for hot corrosion resistance of CM 247 LC superalloy. J. Mater. Sci. Lett. 17 (1998) 1267-1269
33. Park S.Y., Kim J.H., Kim M.C., Song H.S., and Park C.G. Microscopic observation of degradation behavior in yttria and ceria stabilized zirconia thermal barrier coatings under hot corrosion. Surf. Coat. Technol. 190 (2005) 357-365
34. Eliaz N., Shemesh G., and Latanision R.M. Hot corrosion in gas turbine components. Eng. Fail. Anal. 9 (2002) 31-43
35. Khajavi M.R., and Shariat M.H. Failure of first stage gas turbine blades. Eng. Fail. Anal. 11 (2004) 589-597
36. Batista C., Portinha A., Ribeiro R.M., Teixeira V., Costa M.F., and Oliveira C.R. Surface laser-glazing of plasma-sprayed thermal barrier coatings. Appl. Surf. Sci. 247 (2005) 313-319
37. Tsai P.C., and Hsu C.S. High temperature corrosion resistance and microstructural evaluation of laser-glazed plasma-sprayed zirconia/MCrAlY thermal barrier coatings. Surf. Coat. Technol. 183 (2004) 29-34
38. Chang K.C., Wei W.J., and Chen C. Oxidation behavior of thermal barrier coatings modified by laser remelting. Surf. Coat. Technol. 102 (1998) 197-204
39. 2 -YO1.5/Ni-22Cr-10Al-1Y thermal barrier coating. J. Mater. Eng. Perform. 4 6 (1995) 689-696
40. Batista C., Portinha A., Ribeiro R.M., Teixeira V., and Oliveira C.R. Evaluation of laser-glazed plasma-sprayed thermal barrier coatings under high temperature exposure to molten salts. Surf. Coat. Technol. 200 (2006) 6783-6791
41. Ion J. Laser Processing of Engineering Materials: Principles, Procedure and Industrial Application (2005)
42. 2 composite coatings. J. Manuf. Proc. 10 (2008) 1-5
43. Gaumann M., Gilgien P., and Kurz W. CLP Bull. Liaison 34 (2000) 9-24 (in French)