Some aspects of the hot corrosion of thermal barrier coatings

Journal of Thermal Spray Technology

Volumn 6, Issue 1, 1997, Pages 77-84

  Jones, R L ^a  

^a NAVAL RESEARCH LABORATORY   (United States)

Author keywords

Hot corrosion; Molten salts; Oxide acid base reactions; Thermal barrier coatings; Zirconia phase stability

Indexed keywords

CHEMICAL REACTIONS; CORROSION; CORROSION RESISTANCE; DEGRADATION; MOLTEN MATERIALS; PHASE EQUILIBRIA; SALTS; THERMODYNAMIC PROPERTIES; ZIRCONIA;

CORROSIVE DEGRADATION; HOT CORROSION; MOLTEN SALTS; OXIDE ACID BASE REACTIONS; THERMAL BARRIER COATINGS; ZIRCONIA PHASE STABILITY;

PROTECTIVE COATINGS;

EID: 0031102424     PISSN: 10599630     EISSN: None     Source Type: Journal    
DOI: 10.1007/BF02646315     Document Type: Article

References (56)

1. R. A. Miller, Current Status of Thermal Barrier Coatings - An Overview. Surf. Coat. Technol., Vol 30 (No. 1), 1987, p 1-11
2. T.E. Strangman, Thermal Barrier Coatings for Turbine Airfoils, Thin Solid Films, Vol 127 (No. 1), 1985, p 93-105
3. G.C. Clang, W. Phucharoen, and R.A. Miller, Behavior of Thermal Barrier Coatings for Advanced Gas Turbine Blades, Surf. Coat. Technol., Vol 30 (No. 1), 1987, p 13-28
4. S.M. Meier, D.M. Nissley, and K.D. Sheffler, "Thermal Barrier Coating Life Prediction Model Development, Phase II - Final Report," NASA CR-189111, National Aeronautics and Space Administration, July 1991
5. D.V. Rigney, T.E. Mantkowski, and M.J. Froning, Influence of Raw Materials on the Performance Characteristics of Ceramic Coatings, Proc. 1987 Coatings for Advanced Heat Engines Workshop, CONF 870762, U.S. Dept. of Energy, 1987, p V-45 to V-60
6. H.G. Scott, Phase Relationships in the Zirconia-Yttria System, J. Mater. Sci., Vol 10, 1975, p 1527-1535
7. R.A. Miller, R.G. Garlick, and J.L. Smialek, Phase Distributions in Plasma-Sprayed Zirconia-Yttria, Ceram. Bull., Vol 62 (No. 12), 1983, p 1355-1358
8. R.A. Miller, J.L. Smialek, and R.G. Garlick, Phase Stability in Plasma-Sprayed, Partially Stabilized Zirconia-Yttria, Advances in Ceramics, Vol 3, Science and Technology of Zirconia, A.H. Heuer and L.W. Hobbs, Ed., American Ceramic Society, 1981, p 241-252
9. 2. Advances in Ceramics, Vol 24A, Science and Technology of Zirconia III, S. Somiya, N. Yamamoto, and H. Yanagida, Ed., American Ceramic Society, 1988, p 3-20
10. T.-S. Sheu, T.-Y. Tien, and I-W. Chen, Cubic-to-Tetragonal (t′) Transformation in Zirconia-Containing Systems, J. Am. Ceram. Soc., Vol 75 (No. 5), 1992, p 1108-1116
11. 3, Advances in Ceramics, Vol 24A, Science and Technology of Zirconia III, S. Somiya, N. Yamamoto, and H. Yanagida, Ed., American Ceramic Society, 1988, p 377-384
12. A.V. Virkar and R.L.K. Matsumoto, Ferroelastic Domain Switching as a Toughening Mechanism in Tetragonal Zirconia, J. Am. Ceram. Soc., Vol 69 (No. 10), 1986, p C-224 to C-226
13. R. Taylor, J.R. Brandon, and P. Morrell, Microstructure, Composition and Property Relationships of Plasma-Sprayed Thermal Barrier Coatings, Surf. Coat. Technol., Vol 50 (No. 2), 1992, p 141-149
14. J.R. Brandon and R. Taylor, Phase Stability of Zirconia-Based Thermal Barrier Coatings, Pan I. Zirconia-Yttria Alloys, Surf. Coat. Technol., Vol 46 (No. 1), 1991, p 75-90
15. A.N. Belov and G.A. Semenov, Thermodynamics of Binary Solid Solutions of Zirconium, Hafnium and Yttrium Oxides from High-Temperature Mass Spectrometry Data, Russ. J. Phys. Chem., Vol 59 (No. 3), 1985, p 342-344
16. 3 Binary Solid Solutions According to High-Temperature Mass Spectrometry Data, II. Calculations, Russ. J. Phys. Chem., Vol 61 (No. 4), 1987, p 468-470
17. 3 System. J. Electrochem. Soc., Vol 142 (No. 4), 1995, p 1353-1357
18. M. Yoshimura, Phase Stability of Zirconia, Ceram. Bull., Vol 67 (No. 12), 1988, p 1950-1955
19. T.E. Strangman and J.L. Schienle, Tailoring Zirconia Coatings for Performance in a Marine Gas Turbine Environment, J. Eng. Power (Trans. ASME), Vol 112 (No. 4), 1990, p 531-535
20. R.A. Miller, "Ceramic Thermal Barrier Coatings for Electric Utility Gas Turbine Engines," NASA TM 87288, National Aeronautics and Space Administration, 1987
21. 4 and Vaporous NaCl, J. Electrochem. Soc., Vol 124 (No. 10), 1977, p 1641-1648
22. R. Burgel and I. Kvernes, Thermal Barrier Coatings, High Temperalure Alloys for Gas Turbines and Other Applications 1986, W. Betz et al., Ed., D. Reidel Publishing, 1986. p 327-356
23. F.H. Stott, D.J. de Wet, and R. Taylor, Degradation of Thermal-Barrier Coatings at Very High Temperatures. MRS Bull., Oct 1994, p 46-19
24. R.L. Jones, C.E. Williams, and S.R. Jones, Reaction of Vanadium Compounds with Ceramic Oxides, J. Electrochem. Soc., Vol 133 (No. 1), 1986, p 227-230
25. D.W. McKee, K.L. Luthra, P. Siemers, and J.E. Palko, Resistance of Thermal Barrier Ceramic Coatings to Hot Salt Corrosion, Proc. 1st Conf. Advanced Materials for Alternative Fuel Capable Directly Fired Heat Engines, CONF-790749, J.W. Fairbanks and J. Stringer, Ed., U.S. Dept. of Energy, 1979, p 258-269
26. 3) Thermal Barrier Coating in Turbine Fuel with Contaminants, J. Eng. Power (Trans. ASME), Vol 102A (No. 4), 1980, p 770-775
27. R.J. Bratton, S.K. Lau, C.A. Andersson, and S.Y. Lee, Studies of Thermal Barrier Coatings for Heat Engines, Proc. 2nd Conf. Advanced Materials for Alternative-Fuel-Capable Heat Engines, EPRI RD-2369 SR, J.W. Fairbanks and J. Stringer, Ed., Electric Power Research Institute, 1982, p 6-72 to 6-101
28. 3 on the Efficiency with Which MgO Inhibits Vanadic Corrosion in Residual Fuel Fired Gas Turbines, Corros. Sci., Vol 23 (No. 2), 1983, p 139-149
29. I. Kvernes, J.K. Solberg, and K.P. Lillerud, Ceramic Coatings on Diesel Engine Compounds, Proc. 1st Conf. Advanced Materials for Alternative Fuel Capable Directly Fired Heat Engines, CONF-790749, J.W. Fairbanks and J. Stringer, Ed. U.S. Dept of Energy, 1979, p 233-257
30. J.C. Hamilton and A.S. Nagelberg, In Situ Raman Spectroscopic Study of Yttria-Stabilized Zirconia Attack by Molten Sodium Vanadate, J. Am. Ceram. Soc., Vol 67 (No. 10), 1984, p 686-690
31. W. Hertl, Vanadia Reactions with Yttria Stabilized Zirconia. J. Appl. Phys., Vol 63 (No. 11), 1988, p 5514-5520
32. 5, J. Am. Ceram. Soc., Vol 71 (No. 11), 1988, p 1992-1004
33. R.H. Barkalow and F.S. Pettit, Mechanisms of Hot Corrosion Attack of Ceramic Coating Materials, Proc. 1st Conf. Advanced Materials for Alternative Fuel Capable Directly Fired Heat Engines, CONF-790749, J.W. Fairbanks and J. Stringer, Ed., U.S. Dept of Energy, 1979, p 704-714
34. R.L. Jones, The Development of Hot-Corrosion-Resistant Zirconia Thermal Barrier Coatings, Mater. High Temp., Vol 9 (No. 4), 1991, p 228-236
35. R.A. Miller, W.J. Brindley, J.G. Goedjen, R. Tiwari, and D. Mess, The Effect of Silica on the Cyclic Life of a Zirconia-Yttria Thermal Barrier Coming, 1994 National Thermal Spray Conf. Proc.: Thermal Spray Industrial Applications, C.C. Berndt and S. Sampath, Ed., ASM International, 1995, p 49-54
36. T. Mitamura, E. Kogure, F. Noguchi, T. Iida, T. Mori, and Y. Matsumoto, Stability of Tetragonal Zirconia in Molten Fluoride Salts, Advances in Ceramics, Vol 24A, Science and Technology of Zirconia III, S. Somiya, N. Yamamoto, and H. Yanagida, Ed., American Ceramic Society, 1988, p 109-118
37. W.-F. Chu and F.J. Rohr, Corrosion-Resistant Thermal Barrier Coatings, Adv. Ceram. Mater., Vol 3 (No. 3), 1988, p 222-224
38. D.A. Hirschfeld, D.M. Liu, and J.J. Brown, CMZP - A New High Temperature Thermal Barrier Material, 4th Int. Symp. Ceramic Materials and Components for Engines, R. Carlsson, R. Johansson, and L. Kahlman, Ed., Elsevier Applied Science, London, 1992, p 372-380
39. B.A. Nagaraj, A.F. Marichocchi, D.J. Wortman, J.S. Patton, and R.L. Clarke, "Hot Corrosion Resistance of Thermal Barrier Coatings," 92-GT-44, American Society of Mechanical Engineers, 1992
40. D.J. Wortman, B.A. Nagaraj, and E.C. Duderstadt, Thermal Barrier Coatings for Gas Turbine Use, Mater. Sci. Eng., Vol A121, 1989, p 433-440
41. 2 Relating to Hot Corrosion, J. Electrochem. Soc., Vol 132 (No. 6), 1985, p 1498-1501
42. P.A. Siemers and D.W. McKee, Method of Coating a Superalloy Substrate, Coating Compositions, and Composites Therefrom, U.S. Patent 4,328,285, 1982
43. R.L. Jones and C.E. Williams, Hot Corrosion Studies of Zirconia Ceramics, Surf. Coat. Technol., Vol 32 (No. 3), 1987, p 349-358
44. 2 Below 1400 °C. J. Am. Ceram. Soc., Vol 66 (No. 7), 1983, p 506-510
45. B.A. Nagaraj and D.J. Wortman, Burner Rig Evaluation of Ceramic Coatings with Vanadium-Contaminated Fuels, J. Eng. Gas Turbines Power (Trans. ASME), Vol 112 (No. 4), 1990, p 536-542
46. R.L. Jones, Scandia-Stabilized Zirconia for Resistance to Molten Vanadate-Sulfate Corrosion, Surf. Coat. Technol., Vol 39/40 (No. 1), 1989, p 89-96
47. R.L. Jones and D. Mess, India as a Hot Corrosion-Resistant Stabilizer for Zirconia, J. Am. Ceram. Soc., Vol 75 (No. 7), 1992, p 1818-1821
48. 3. J. Electrochem. Soc., Vol 139 (No. 10), 1992, p 2794-2799
49. 1.5.. J. Am. Ceram. Soc., Vol 76 (No. 3), 1993, p 689-698
50. R.L. Jones, Hot Corrosion Resistance of Scandia Stabilized Zirconia Coatings, Ceramics Trans., Vol 10, Corrosion and Corrosive Degradation of Ceramics, R.E. Tressler and M. McNallan, Ed., American Ceramic Society, 1990, p 291-308
51. R.L. Jones, D. Mess, and H. Herman, 1991, unpublished research
52. S.B. Qadri, E.F. Skelton, C. Kim, M.Z. Harford, and P. Lubitz, Electron-Beam Deposition of Zirconia Films Stabilized in High Temperature Phases by Different Oxides, Surf. Coat. Technol., Vol 49 (No. 1), 1991, p 67-70
53. 3 Systems, J. Am. Ceram. Soc., Vol 76 (No. 8), 1993, p 2027-2032
54. 3 Plasma-Sprayed Coatings for Thermal Barrier Applications, Thin Solid Films, Vol 150 (No. 1), 1987, p 15-40
55. HSC Chemistry for Windows, Version 2.0, Outokumpu Research, Pori, Finland
56. B.A. Movchan, I.S. Malashenko, K. Yu, Yakovchuk, A.I. Rybnikov, and A.A. Tchizhik, Two- and Three-Layer Coatings Produced by Deposition in Vacuum for Gas Turbine Blade Protection, Surf. Coat. Technol., Vol 67 (No. 1), 1994, p 55-63