Influence of etching with erbium, chromium:yttrium-scandium-gallium-garnet laser on microleakage of class V restoration

Lasers in Medical Science

Volumn 25, Issue 3, 2010, Pages 325-329

  Marotti, Juliana ^a   Geraldo Martins, Vinícius Rangel ^a   Bello Silva, Marina Stella ^a   De Paula Eduardo, Carlos ^a   Apel, Christian ^b   Gutknecht, Norbert ^b  

^a UNIVERSITY OF SÃO PAULO   (Brazil)

^b UNIVERSITY HOSPITAL RWTH AACHEN   (Germany)

Author keywords

Composite resin; Dental etching; Laser; Microleakage

Indexed keywords

METHYLENE BLUE; PHOSPHORIC ACID;

ARTICLE; CONTROLLED STUDY; DENTAL ACID ETCHING; DENTAL CARE; DENTAL LASER ETCHING; ERBIUM CHROMIUM YTTRIUM SCANDIUM GALLIUM GARNET LASER; HUMAN; HUMAN TISSUE; INTERMETHOD COMPARISON; LASER; MOLAR TOOTH; PRIORITY JOURNAL; QUALITY CONTROL; SPECTRAL SENSITIVITY; DENTAL BONDING; DENTAL ETCHING; DENTAL SURGERY; DENTIN; EVALUATION; IN VITRO STUDY; METHODOLOGY; RADIATION EXPOSURE; SOLID STATE LASER;

DENTAL BONDING; DENTAL CAVITY PREPARATION; DENTAL ETCHING; DENTAL RESTORATION, PERMANENT; DENTIN; HUMANS; LASERS, SOLID-STATE; MOLAR, THIRD;

EID: 77953064137     PISSN: 02688921     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10103-008-0623-6     Document Type: Article

References (33)

1. Perdigao J (2007) New developments in dental adhesion. Dent Clin North Am 51:333-357. doi:10.1016/j.cden. 2007.01.001
2. Hickel R, Roulet JF, Bayne S, Heintze SD, Mjor IA, Peters M et al (2007) Recommendations for conducting controlled clinical studies of dental restorative materials. Clin Oral Investig 11:5-33 doi:10.1007/s00784-006-0095-7
3. Awliya WY, El-Sahn AM (2008) Leakage pathway of class V cavities restored with different flowable resin composite restorations. Oper Dent 33:31-36. doi:10.2341/07-22
4. Aoki A, Ishikawa I, Yamada T, Otsuki M, Watanabe H, Tagami J et al (1998) Comparison between Er:YAG laser and conventional technique for root caries treatment in vitro. J Dent Res 77:1404-1414
5. Geraldo-Martins VR, Robles FR, Matos AB (2007) Chlorhexidine's effect on sealing ability of composite restorations following Er:YAG laser cavity preparation. J Contemp Dent Pract 8:26-33
6. Hossain M, Yamada Y, Nakamura Y, Murakami Y, Tamaki Y, Matsumoto K (2003) A study on surface roughness and microleakage test in cavities prepared by Er:YAG laser irradiation and etched bur cavities. Lasers Med Sci 18:25-31. doi:10.1007/s10103-002-0235-5 (Pubitemid 36401967)
7. Parker S (2007) Surgical lasers and hard dental tissue. Br Dent J 28:445-454. doi:10.1038/bdj.2007.294
8. Tachibana A, Marques MM, Soler JM, Matos AB (2007) Erbium, chromium:yttrium scandium gallium garnet laser for caries removal: influence on bonding of a self-etching adhesive system. Lasers Med Sci 23:135-441. doi:10.1007/s10103-007-0503-5
9. Usumez A, Aykent F (2003) Bond strengths of porcelain laminate veneers to tooth surfaces prepared with acid and Er, Cr:YSGG laser etching. J Prosthet Dent 90:24-30. doi:10.1016/S0022-3913 (03) 00235-X
10. Aranha AC, De Paula Eduardo C, Gutknecht N, Marques MM, Ramalho KM, Apel C (2007) Analysis of the interfacial micromorphology of adhesive systems in cavities prepared with Er, Cr:YSGG, Er:YAG laser and bur. Microsc Res Tech 70:745-751. doi:10.1002/jemt.20459 (Pubitemid 47263235)
11. Hossain M, Nakamura Y, Tamaki Y, Yamada Y, Murakami Y, Matsumoto K (2003) Atomic analysis and knoop hardness measurement of the cavity floor prepared by Er, Cr:YSGG laser irradiation in vitro. J Oral Rehabil 30:515-521. doi:10.1046/j.1365-2842.2003.01113.x (Pubitemid 37249081)
12. de Carvalho RC, de Freitas PM, Otsuki M, de Eduardo CP, Tagami J (2008) Micro-shear bond strength of Er:YAG-lasertreated dentin. Lasers Med Sci 23:117-124. doi:10.1007/s10103-006-0434-6 (Pubitemid 351422630)
13. Gutknecht N, Apel C, Schafer C, Lampert F (2001) Microleakage of composite fillings in Er, Cr:YSGG laser-prepared class II cavities. Lasers Surg Med 28:371-374. doi:10.1002/lsm.1064 (Pubitemid 32411120)
14. Aranha AC, Turbino ML, Powell GL, Eduardo Cde P (2005) Assessing microleakage of class V resin composite restorations after Er:YAG laser and bur preparation. Lasers Surg Med 37:172-177. doi:10.1002/lsm.20208 (Pubitemid 41266302)
15. Ergucu Z, Celik EU, Turkun M (2007) Microleakage study of different adhesive systems in class V cavities prepared by Er, Cr: YSGG laser and bur preparation. Gen Dent 55:27-32
16. Lupi-Pegurier L, Bertrand MF, Genovese O, Rocca JP, Muller-Bolla M (2007) Microleakage of resin-based sealants after Er: YAG laser conditioning. Lasers Med Sci 22:183-188. doi:10.1007/s10103-006-0437-3 (Pubitemid 47231289)
17. Delfino CS, Souza-Zaroni WC, Corona SA, Palma-Dibb RG (2007) Microtensile bond strength of composite resin to human enamel prepared using erbium: yttrium aluminum garnet laser. J Biomed Mater Res A 80:475-479. doi:10.1002/jbm.a.30964 (Pubitemid 46122681)
18. Chinelatti MA, Ramos RP, Chimello DT, Corona SA, Pecora JD, Dibb RG (2006) Influence of Er:YAG laser on cavity preparation and surface treatment in microleakage of composite resin restorations. Photomed Laser Surg 24:214-278. doi:10.1089/pho.2006.24.214 (Pubitemid 43837156)
19. Cardoso MV, Coutinho E, Ermis RB, Poitevin A, Van Landuyt K, De Munck J et al (2008) Influence of Er, Cr:YSGG laser treatment on the microtensile bond strength of adhesives to dentin. J Adhes Dent 10:25-33
20. Carvalho RM, Pereira JC, Yoshiyama M, Pashley DH (1996) A review of polymerization contraction: the influence of stress development versus stress relief. Oper Dent 21:17-24
21. Gilmour SM, Edmunds DH, Dummer PM (1990) The production of secondary caries-like lesions on cavity walls and the assessment of microleakage using an in vitro microbial caries system. J Oral Rehabil 17:573-578. doi:10.1111/j.1365-2842.1990. tb01428.x
22. Braga SR, Vasconcelos BT, Macedo MR, Martins VR, Sobral MA (2007) Reasons for placement and replacement of direct restorative materials in Brazil. Quintessence Int 38: e189-e194
23. Tielemans M, Compere P, Geerts SO, Lamy M, Limme M, De Moor RJ et al (2007) Comparison of microleakages of photocured composites using three different light sources: halogen lamp, LED and argon laser: an in vitro study. Lasers Med Sci. doi:10.1007/s10103-007-0504-4
24. Hossain M, Nakamura Y, Yamada Y, Murakami Y, Matsumoto K (2002) Microleakage of composite resin restoration in cavities prepared by Er, Cr:YSGG laser irradiation and etched bur cavities in primary teeth. J Clin Pediatr Dent 26:263-268
25. Visuri SR, Gilbert JL, Wright DD, Wigdor HA, Walsh JT Jr (1996) Shear strength of composite bonded to Er:YAG laserprepared dentin. J Dent Res 75:599-605
26. Lin S, Caputo AA, Eversole LR, Rizoiu I (1999) Topographical characteristics and shear bond strength of tooth surfaces cut with a laser-powered hydrokinetic system. J Prosthet Dent 82:451-455. doi:10.1016/S0022-3913 (99) 70033-8
27. Martinez-Insua A, Da Silva Dominguez L, Rivera FG, Santana-Penin UA (2000) Differences in bonding to acid-etched or Er: YAG-laser-treated enamel and dentin surfaces. J Prosthet Dent 84:280-288. doi:10.1067/mpr.2000.108600
28. Sung EC, Chenard T, Caputo AA, Amodeo M, Chung EM, Rizoiu IM (2005) Composite resin bond strength to primary dentin prepared with Er, Cr:YSSG laser. J Clin Pediatr Dent 30:45-49
29. Gutknecht N, van Gogswaardt D, Conrads G, Apel C, Schubert C, Lampert F (2000) Diode laser radiation and its bactericidal effect in root canal wall dentin. J Clin Laser Med Surg 18:57-60 (Pubitemid 30350381)
30. Ceballos L, Osorio R, Toledano M, Marshall GW (2001) Microleakage of composite restorations after acid or Er-YAG laser cavity treatments. Dent Mater 17:340-346. doi:10.1016/S0109-5641 (00) 00092-0 (Pubitemid 33649501)
31. Armengol V, Jean A, Rohanizadeh R, Hamel H (1999) Scanning electron microscopic analysis of diseased and healthy dental hard tissues after Er:YAG laser irradiation: in vitro study. J Endod 25:543-546. doi:10.1016/S0099-2399 (99) 80376-8
32. Jassem HA, Retief DH, Jamison HC (1981) Tensile and shear strengths of bonded and rebonded orthodontic attachments. Am J Orthod 79:661-668. doi:10.1016/0002-9416 (81) 90358-4
33. Feilzer AJ, de Gee AJ, Davidson CL (1993) Setting stresses in composites for two different curing modes. Dent Mater 9:2-5. doi:10.1016/0109-5641 (93) 90095-8