Vibration and noise in brake systems of vehicles. Part 2: Theoretical Investigation Techniques

Journal of Friction and Wear

Volumn 30, Issue 3, 2009, Pages 216-226

  Sergienko, V P ^a   Bukharov, S N ^a  

^a VA Belyi Metal Polymer Research Institute of National Academy of Sciences of Belarus   (Belarus)

Author keywords

Friction units; Mobile machines; Noise; Theoretical methods; Vibration

Indexed keywords

BRAKE NOISE; BRAKE SYSTEMS; CALCULATION METHODS; CALCULATION MODELS; MOBILE MACHINES; NOISE AND VIBRATION; THEORETICAL INVESTIGATIONS; THEORETICAL RESEARCH;

BRAKES; FRICTION; FRICTION MATERIALS; TRIBOLOGY;

NUMERICAL METHODS;

EID: 77952859683     PISSN: 10683666     EISSN: 19349386     Source Type: Journal    
DOI: 10.3103/S1068366609030106     Document Type: Article

References (102)

1. Abendroth, H. et al., The Integrated Text Concept Dino-Vehicle Performance and Noise, Proc. 18th Brake Colloquium, San Diego, CA, 2000, pp. 143-148.
2. Abendroth, H. and Tepper, H., Worldwide Brake-Friction Material Testing Standards, Challenges, Trends, Proc. 7th Int. Symp. of Friction Products and Materials Yarofri-2008, Yaroslavl, 2008, pp. 140-150.
3. Sergienko, V. P., Bukharov, S. N., and Kupreev, A. V., Noise and Vibration in Brake System of Vehicles. Part 1. Experimental Procedures, Tren. Iznos, 2008, vol, 29, no. 3, pp. 306-314 [J. Fric. Wear, 2008, vol. 29, no. 3, pp. 234-241].
4. Cunefare, K., Investigation of Disc Brake Squeal Via Sound Intensity and Laser Vibrometry, SAE Paper no. 2001-01-1604, 2001.
5. Bae, J. C. and Wickert, J. A., Free Vibration of Coupled Disc-Hat Structures, J. of Sound and Vibration, 2000, vol. 235, no. 1, pp. 117-132.
6. Hodges, T., Development of Refined Friction Materials, Proc. 5th Int. Symp. on Friction Products and Materials Yarofri-2003, Yaroslavl, 2003, pp. 203-208.
7. Mowka, R., Structured Development Process in Stages of OE-Projects Involving with Western European Car Manufacturer, Proc. 5th Int. Symp. on Friction Products and Materials Yarofri-2003, Yaroslavl: 2003, pp. 228-232.
8. Liu, W. and Pfeifer, J., Introductions to Brake Noise & Vibration, Honeywell Friction Materials, http://www.saeorg/events/bce/honeywell-liu.pdf.
9. North, M. R., Disc Brake Squeal, Proc. Conf. on Brake of Road Vehicles, Inst. of Mech. Eng., 1976, (C38/76), pp. 169-176.
10. Gugino, A. et al., Brake Moan Simulation Using Flexible Methods in Multibody Dynamics, Proc. 18th Brake Colloquium, San Diego, CA, 2000, 99-104.
11. Riesland, D. et al., Rear Disc Brake Moan-Experimental Investigation and ADAMS Simulations, Proc. 2nd Int. Seminar on Automotive Braking-Recent Developments and Future Trends, Leeds UK, 1998, http://www. mscsoftware.com/suspension/library/conf/adams/na/1997/uc970008.pdf.
12. Hack, W. V. and Joshi, A. M., Friction Induced Vibration Brake Moan, SAE Paper, no. 951095, 1995.
13. Harolan, P. D. and Hetherington, P. L., Suspension Related Low Frequency Rear Drum Brake Noise, SAE Paper, no. 911043, 1991.
14. Donley, M. G., Lim, T. C., and Steyer, G. C., Dynamic Analysis of Automotive Gearing System, SAE Paper, no. 620762, 1992.
15. Abdelhamid, M. K., Creep Groan of Disc Brakes, SAE Paper, no. 951282, 1995.
16. Hodges, T. and Dengosch, F. J., Entwicklung einer methode zur untersuchung von bremsen-kaltrubbeln, Automobilitechnische Zeitschrift, 2001, vol. 1, pp. 70-72.
17. Thermal Judder, Eurac Technical Bulletin 00034056 [Electronic resource], www. eurac-group. com/documents/thermaljudder. doc.
18. Suryatama, D. et al., Thermal Judder on Drum Brakes due to Mounted Radial Run out, Proc. 2nd ANSA & ETA Int. Congr., Halkidiki: 2007, pp. 283-293.
19. Anderson, A. E. and Knapp, R. A., Hot Spotting in Automotive Friction Systems, Wear, 1990, vol. 135, pp. 319-337.
20. Barber, J. R., Frictionally-Excited Thermoelastic Instability (TEI), http://www-personal.engin.umich.edu/~jbarber/TEI.html.
21. Pogosyan, A. K., Makaryan, V. K., and Gagyan, G. S., Calculation of Vibrostability of Friction Parts of Disc-Block Brake Systems of Vehicles, Tren. Iznos, 1991, vol. 12, no. 2, pp. 225-231.
22. Chichinadze, A. V., Brawn, E. D., Gekker, F. R., et al., Simulation of Friction Units Using Multi-Disc Brakes of Aircraft Wheels as an Example, Inzh. Zh., 1998, no. 9, pp. 46-54.
23. Gelig, A. Kh., Leonov, G. A., and Yakubovich, V. A., Ustochivost' nelineinykh sistem s needinstevnnym sostoyanem ravnovesiya (Stability of Nonlinear Systems with Nonsingular Equilibrium State), Moscow: Nauka, 1978.
24. Kolebaniya nelineinykh sistem: Spravochnik v 6 t. Kolebaniya nelineinykh mekhanicheskikh system (Engineering: Reference Book in 6 vols. Vibrations of Nonlinear Mechanical Systems), Moscow: Mashinostroenie, 1979, vol. 2.
25. Dimentberg, M. F., Nelinenye stochasticheskie zadachi mekhancheskikh kolebanii (Nonlinear Stochastic Problems of Mechanical Vibrations), Moscow: Nauka, 1980.
26. Vadari, V., Albright, M., and Edgar, D., An Introduction to Brake Noise Engineering, Sound and Vibration, 2001, http://www.roushind.com/PDFs/2007/Introto-BrakeNoiseEngineering.pdf.
27. Wallaschek, J., Hach K. H., Stolz, U., and Mody, P., A Survey of the Present State of Friction Modeling in the Analytical and Numerical Investigation of Brake Squeal, Proc. ASME Vibr. Conf., Las Vegas, 1999, pp. 12-15.
28. Kragelskii, I. V. and Gitis, N. V., Friktsionnye avtokolbaniya (Frictional Autovibrations), Moscow: Nauka, 1987.
29. Ahmed, I., On the Analysis of Drum Brake Squeal Using Finite Element Methods Technique, SAE Paper, no. 01-3467, 2006.
30. Millner, N., An Analysis of Disc Brake Squeal, SAE Paper, no. 780332, 1978.
31. Bakar, A., Ouyang, H., and Siegel, J., Brake Pad Surface Topography. Part I: Contact Pressure Distributions, SAE Paper, no. 01-3941, 2005.
32. Liles, G., Analysis of Disc Brake Squeal Using Finite Element Methods, SAE Paper, no. 891150, 1989.
33. Kim, S., Cho, S., and Yeo, T., A Study on the Effects of Piston and Finger Offset on the Pressure Distribution at Disc Brake Pad Interface, SAE Paper, no. 01-0794, 2005.
34. Fieldhouse, J., An Investigation of the Pad/Disc Dynamic Centre of Pressure Using a 12 Piston Opposed Caliper, SAE Paper, no. 01-3960, 2007.
35. Ouyang, H. and Mottershead, J. E., Friction-Induced Parametric Resonances in Disc: Effect of a Negative Friction-Velocity Relationship, J. of Sound and Vibration, 1998, vol. 209, no. 2, pp. 251-264.
36. Shih-Wei Kung et al., Modal Participation Analysis for Identifying Brake Squeal Mechanism, Proc. 18th Brake Colloquium, San Diego, CA, 2000, pp. 75-79.
37. Donley, M. and Chung, C. H., Mode Coupling Phenomenon of Brake Squeal Dynamics, SAE Paper, no. 01-1624, 2003.
38. Ouyang, H., Nack, W., Yuan, Y., and Chen, F., Numerical Analysis of Automotive Disc Brake Squeal: a Review, Int. J. Vehicle Noise and Vibration, 2005, vol. 1, no. 3-4, pp. 207-231.
39. Gouya, M. and Nishiwaki, M., Study on Disc Brake Groan, SAE Paper, no. 900007, 1990.
40. Brecht, J., Mechanisms of Brake Creep Groan, SAE Paper, no. 973026, 1997.
41. Donley, M. and Riesland, D., Brake Groan Simulation for a McPherson Strut Type Suspension, SAE Paper, no. 2003-01-1627, 2003.
42. Hoffmann, N. and Gaul, L., Friction-Induced Vibrations of Brakes: Research Fields and Activities, SAE Paper, no. 2008-01-2579, 2008.
43. Jang, H., Lee J. S., and Fash, J. W., Compositional Effects of the Brake Friction Material on Creep Groan Phenomena, Proc. 13th Int. Conf. on Wear of Materials, Vancouver, 2001, pp. 1477-1483.
44. Sergienko, V. P., Bukharov, S. N., and Kupreev, A. V., Influence of the Composition of Composite Materials on the Level of Vibration in Friction Pairs, Proc. Int. Conf on the Theory and Practice of Technology of Manufacture of Articles of Composite Materials and New Metallic Alloys, Moscow, 2007, pp. 174-179.
45. Sergienko, V. P., Bukharov, S. N., and Kupreev, A. V., A Study of the Influence of Structure of Composite Materials on the Vibration of Frictional Pairs, Proc. 10th Int. Conf. on Tribology SERBIATRIB'07, 2007, pp. 85-88.
46. Mahajan, S., Hu, Y.-K., and Zhang, K., Vehicle Disc Brake Squeal Simulations and Experiences, SAE Paper, no. 1999-01-1738, 1999.
47. Kim, U. and Mongeau, L., Simulation of Friction-Induced Vibrations of Window Sealing Systems, SAE Paper, no. 2007-01-2268, 2007.
48. Ostermeyer, G. P., On Tangential Friction Induced Vibrations in Brake Systems, SAE Paper, no. 2008-01-2850, 2008.
49. Rubinstein, S. M., Cohen, G., and Fineberg, J., Detachment Fronts and the Onset of Friction, Nature, 2004, vol. 430, pp. 1005-1009.
50. Rubinstein, S. M., Cohen, G., and Fineberg, J., Dynamics of Precursors to Frictional Sliding, Phys. Rev. Lett., 2007, vol. 98, no. 22, pp. 226103. 1-226103. 4.
51. Popp, K. and Stelter, P., Stick-Slip Vibrations and Chaos, Phil. Trans. Roy. Soc., 1990, vol. 332, pp. 89-105.
52. Pavlyuk, Yu. S. and Sakulin, V. D., Nelineinaya dinamika mekhanicheskikh sistem pri sluchainom vozdeistvii (Nonlinear Dynamics of Mechanical Systems at Occasional Effect), ftp://ftp.urc.ac.ru/pub/local/e-zines/DSM/v1_05.pdf.
53. Jearsiripongkul, T., Chakraborty, G., and Hagedorn, P., Stability Analysis of a New Model Floating Caliper Disc Brake, Integrated Comput. Aided Des., 2004, vol. 11, pp. 77-84.
54. Liu, P. et al., Analysis of Disc Brake Squeal Using the Complex Eigenvalue Method, Appl. Acoustics, 2007, vol. 68, pp. 603-615.
55. Chowdhary, H. V., Bajaj, A. K., and Krousgrill, C. M., An Analytical Approach to Model Disc Brake System for Squeal Prediction, Proc. ASME DETC 2001, Pittsburgh, 2001, http://130.240.31.230/articles/Conference Proceedings/ASME-2001-Design Engineering Technical Conference/pdfs/vib/21560.pdf.
56. Iwan, W. D. and Moeller, T. L., The Stability of a Spinning Elastic Disc with a Transverse Load System, J. of Appl. Mech., 1976, vol. 43, no. 3, pp. 485-490.
57. Lewis, T., Analysis and Control of Brake Noise, SAE Paper, no. 872240, 1987.
58. Wauer, J. and Heilig, J., Dynamics and Stability of a Nonlinear Brake Model, Proc. ASME DETC 2001, Pittsburgh, 2001, http://130.240.31.230/articles/ConferenceProceedings/ASME-2001-DesignEngineering Techical Conference/pdfs/vib/21579.pdf.
59. Ghesquiere, H., Brake Squeal Noise Analysis and Prediction, ImechE Paper, no. 925060, 1992.
60. Schmalfuß, C., Theoretische und experimentelle untersuchung von scheibenbremsen, Doctoral thesis: VDI Fortschritt-Bericht Reihe, 2002, no. 494.
61. Ahmed, I., On the Analysis of Drum Brake Squeal Using Finite Element Methods Technique, SAE Paper 2006-01-3467, 2006.
62. Nishiwaki, M. et al., A Study on Friction Materials for Brake Squeal Reduction by Nanotechnology, SAE Paper, no. 2008-01-2581, 2008.
63. Kung, S. W., Dunlap, K. B., and Ballinger, R. S., Complex Eigenvalue Analysis for Reducing Low Frequency Squeal, SAE Paper, no. 2000-01-0444, 2000.
64. Chen, L. W. and Ku, D., Stability of Nonconservatively Elastic Systems Using Eigenvalue Sensitivity, ASME J. of Vibration and Acoustics, 1994, vol. 116, no. 2, pp. 168-172.
65. AbuBakar, A. R. and Ouyang, H., Complex Eigenvalue Analysis and Dynamic Transient Analysis in Predicting Disc Brake Squeal, Int. J. Vehicle Noise and Vibration, 2006, vol. 2, no. 2, pp. 143-155.
66. Hu, Y.-K. and Nagy, L. I., Brake Squeal Analysis by Using Nonlinear Transient Finite Element Method, SAE Paper, no. 971510, 1997.
67. Hu, Y.-K., Mahajan, A., and Zhang, K., Brake Squeal DOE Using Nonlinear Transient Analysis, SAE Paper, no. 1999-01-1737, 1999.
68. Nishiwaki, M. et al., Study on Disc Brake Squeal, SAE Paper, no. 890864, 1989.
69. Matsui, H. et al., Analysis of Disc Brake Squeal, SAE Paper, no. 920553, 1992.
70. Dihua, G. and Dondying, J., A study on Disc Brake Squeal Using Finite Element Methods, SAE Paper, no. 980597, 1998.
71. Nack, W. V., Brake Squeal Analysis by the Finite Element Method, Int. J. Vehicle Des., 2000, vol. 23, no. 3-4, pp. 263-275.
72. Saad, Y., Krylov Subspace Methods for Solving Large Unsymmetric Linear System, Math. Comp., 1981, vol. 37, pp. 105-126.
73. ABAQUS Analysis User's Manual. Version 6. 7, Providence: SIMVLIA, 2007.
74. Cao, Q., Ouyang, H., Friswell M. I., and Mottershead, J. E., Linear Eeigenvalue Analysis of the Disc-Brake Squeal Problem, Int. J. Numer. Math. Eng., 2004, no. 61, pp. 1546-1563.
75. Murakami, H., Tsunada, N., and Kitamura, T., A Study Concerned with a Mechanism of Disc-Brake Squeal, SAE Paper, no. 841233, 1984.
76. Chung, C. H., Steed, W., Dong, J., and Kim, B. S., Virtual Design of Brake Squeal, SAE Paper, 2003-01-1625, 2003.
77. Chung, C. H., Steed, W., Kobayashi, K., and Nakata, H., A New Analysis Method for Brake Squeal. Part I: Theory for Modal Domain Formulation and Stability Analysis, SAE Paper, no. 2001-01-1600, 2001.
78. Nakata, H., Kobayashi, K., Kajita, M., and Chung, C., A New Analysis Approach for Motorcycle Brake Squeal Noise and Its Adaptation, SAE Paper, no. SETC2001-01-1850, 2001.
79. Nashir, A., Jones, D., and Henderson, D., Dempfirovanie kolebanii (Vibration Damping), Moscow: Mir, 1988.
80. Hoffmann, N. and Gaul, L., Quenching Mode-Coupling Friction Induced Instability Using High Frequency Dither, J. of Sound and Vibration, 2005, no. 279, pp. 471-480.
81. Tworzydlo, W. W., Zaton, Z., Judek, T., and Loftus, H., Experimental and Numerical Studies of Friction Induced Oscillations of a Pin on Disc Apparatus, Proc.ASME Des.Eng.Tech.Conf.-Paper DETC97/VIB-3903, 1997.
82. Ouyang, H., Nack, W., Yuan, Y., and Chen, F., On Automotive Disc Brake Squeal. Part I: Simulation and Analysis, SAE Paper 2003-01-0684, 2003.
83. Nagy, L. I., Cheng, J., and Hu, Y., A New Method Development to Predict Squeal Occurrence, SAE Paper, no. 942258, 1994.
84. Chargin, M. L., Dunne, L. W., and Herting, D. N., Nonlinear Dynamics of Brake Squeal, Finite Elements Anal. Des., 1997, vol. 28, pp. 69-82.
85. Chern, Y., Chen, F., and Swayze, J., Nonlinear Brake Squeal Analysis, SAE Paper, no. 2002-01-3138, 2002.
86. van der Auweraer, H., Hendricx, W., Garesci, F., and Pezzutto, A., Experimental and Numerical Modeling of Friction Induced Noise in Disc Brakes, SAE Paper, no. 2002-01-1192, 2002.
87. Rook, T. E., Enright, J. J., Kumar, S., and Balagangsadhar, R., Simulation of Aircraft Brake Vibration Using Fflexible Multibody and Finite Element Methods to Guide Component Testing, SAE Paper, no. 2001-01-3142, 2001.
88. Hamzeh, O. N., Tworzydlo, W. W., Chang H. J., and Fryska S. T., Analysis of Friction-Induced Instabilities in a Simplified Aircraft Brake, SAE Paper, no. 1999-01-3404, 1999.
89. Travis, M. H., Nonlinear Transient Analysis of Aircraft Landing Gear Brake Whirl and Squeal, Proc. ASME Des. Eng. Conf., DE-Vol. 84-1. Part A, 1995, vol. 3, pp. 1209-1216.
90. Tuchinda, A., Hoffmann, N. P., Ewins, D. J., and Keiper, W., Mode Lock-in Characteristics and Instability Study of the Pin-on-Disc System, Proc. 19th Int. Modal Analysis Conf. IMAC-XIX, Florida, 2001, pp. 71-77.
91. Earles, S. and Chambers, P., Disc Brake Squeal Noise Generation: Predicting Its Dependency on System Parameters Including Damping, Int. J. Veh. Des, 1987, vol. 8, pp. 538-552.
92. Hoffmann, N. and Gaul, L., The Role of Damping in Mode-Coupling Type Instability, Z. Angew. Math. Mech., 2003, vol. 83, pp. 524-534.
93. Sinou, J.-J. and Jezequel, L., Mode Coupling Instability in Friction-Induced Vibrations and Its Dependency on System Parameters Including Damping, Europ. J. Mech., 2007, vol. A 26, pp. 106-122.
94. Willner, K., Elasto-plastic Normal Contact of Three-Dimensional Fractal Surfaces Using Halfspace Theory, J. Tribology, 2004, vol. 126, pp. 28-33.
95. Gaul, L. and Nitsche, R., The Role of Friction in Mechanical Joints, Appl. Mech. Rev., 2001, vol. 54, pp. 93-106.
96. Hochlenert, D., Spelsberg-Korspeter, G., and Hagedorn, P., Friction Induced Vibrations in Moving Continua and Their Application to Brake Squeal, J. Appl. Mech., 2007, vol. 74, pp. 542-549.
97. Kirillov, O. N., Subcritical Flutter in the Acoustics of Friction, Proc. Roy. Soc. A, http://onkirillov.narod.ru/2008-RSPA20080021.pdf.
98. Hetzler, H., Schwarzer, D., and Seemann, W., Steady-State Stability and Bifurcations of Friction Oscillators due to Velocity-Dependent Friction Characteristics, Proc. Inst. Mech. Eng. Part K. J. Multibody Dynamics, 2007, vol. 221, pp. 401-412.
99. Ostermeyer, G. P., Müller, M., Abendroth, H., and Wernitz, B., Surface Topography and Wear Dynamics of Brake Pads, SAE Paper 2006-01-3202, 2006.
100. Gaul, L., Allgaier, R., Keiper, W., and Willner, K., Untersuchungen zum Bremsenquietschen am Balken-Scheibe-Modell, VDI-Bericht 1736, 2002, pp. 17-31.
101. Chen, F., Abdelhamid, M. K., Blaschke, P., and Swayze, J., On Automotive Disc Brake Squeal. Pt. III: Test and Evaluation, SAE Paper, no. 2003-01-1622, 2003.
102. Qi, H. S., Day, A. J., Kuan, K. H., and Forsala, G. F., A Contribution Towards Understanding Brake Interface Temperatures, Proc. Int. Conf. Braking 2004: Vehicle Braking and Chassis Control, Professional Engineering Publishing Ltd., 2004, pp. 251-260.