Real-time diagnostics, prognostics & health management for large-scale manufacturing maintenance systems

Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008

Volumn 2, Issue , 2009, Pages 85-94

  Barajas, Leandro G ^a   Srinivasa, Narayan ^b  

^a GENERAL MOTORS CORPORATION   (United States)

^b Hughes Aircraft Co   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BEST PRACTICE; CAUSE-EFFECT RELATIONSHIPS; DIAGNOSTICS AND PROGNOSTICS; HEALTH MANAGEMENT; INTEGRATED FRAMEWORKS; KEY PERFORMANCE INDICATORS; LARGE-SCALE MANUFACTURING; LESSONS LEARNED; MAINTENANCE SYSTEMS; MANUFACTURING BUSINESS; MODEL BASED APPROACH; MULTIDIMENSIONAL DATA; PROGNOSTICS AND HEALTH MANAGEMENTS; REAL-LIFE APPLICATIONS; REAL-TIME DIAGNOSTICS; ROOT CAUSE; STRATEGIC LEVEL; TACTICAL DECISIONS; TEMPORAL UNCERTAINTY;

AUTOMOTIVE INDUSTRY; BENCHMARKING; HEALTH; MANUFACTURE;

REAL TIME SYSTEMS;

EID: 77951533533     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/MSEC_ICMP2008-72511     Document Type: Conference Paper

References (53)

1. A. Ginige and S. Murugesan, "Web engineering: an introduction, " Multimedia, IEEE, vol.8, pp. 14-18, 2001.
2. J. R. Moyne and D. M. Tilbury, "The Emergence of Industrial Control Networks for Manufacturing Control, Diagnostics, and Safety Data, " Proceedings of the IEEE, vol.95, pp. 29-47, 2007.
3. M. Koc, J. Ni, J. Lee, and P. Bandyopadhyay, "Introduction to e-Manufacturing, " in The Industrial Information Technology Handbook, R. Zurawski, Ed.: CRC Press, 2005.
4. J. Lee, J. Ni, D. Djurdjanovic, H. Qiu, and H. Liao, "Intelligent prognostics tools and e-maintenance, " Computers in Industry, vol.57, pp. 476-489, 2006.
5. G. Kaplan, "Ethernet's winning ways, " Spectrum, IEEE, vol.38, pp. 113-115, 2001.
6. D. W. Pritty, J. R. Malone, D. N. Smeed, S. K. Banerjee, and N. L. Lawrie, "A real-time upgrade for Ethernet based factory networking, " presented at Industrial Electronics, Control, and Instrumentation, 1995., Proceedings of the 1995 IEEE IECON 21st International Conference on, 1995.
7. OPC Foundation, "OPC Fundamentals, " [Online document], 2008 April 9, Available HTTP: http://www.opcfoundation.org/
8. OASIS international standards consortium, "Applying XML and web standards in industry, " [Online document], 2008 April 9, Available HTTP: http://www.xml.org/
9. World Wide Web Consortium (W3C), "W3C Technical Reports and Publications, " [Online document], 2008 April 9, Available HTTP: http://www.w3.org/TR/
10. S. Yu-Chuan, C. Fan-Tien, H. Min-Hsiung, L. Yen-Chang, and L. Rung-Chuan, "Design and implementation of an intelligent prognostics system, " presented at Automation Science and Engineering, 2005. IEEE International Conference on, 2005.
11. J. Zhou, X. Li, A. J. R. Andernroomer, H. Zeng, K. M. Goh, Y. S. Wong, and G. S. Hong, "Intelligent prediction monitoring system for predictive maintenance in manufacturing, " presented at Industrial Electronics Society, 2005. IECON 2005. 32nd Annual Conference of IEEE, 2005.
12. J. D. Bohr, "Diagnostic metrics-A critical element of the diagnostic architecture, " presented at AUTOTESTCON '99. IEEE Systems Readiness Technology Conference, 1999. IEEE, 1999.
13. S. J. Engel, S. J. Engel, B. J. Gilmartin, K. Bongort, and A. A. H. A. Hess, "Prognostics, the real issues involved with predicting life remaining, " presented at Aerospace Conference Proceedings, 2000 IEEE, 2000.
14. S. B. Dolins, "Analyzing manufacturing processes to determine the placement of diagnostic systems, " Components, Hybrids, and Manufacturing Technology, IEEE Transactions on, vol.15, pp. 1146-1154, 1992.
15. C. Groba, S. Cech, F. Rosenthal, and A. Gossling, "Architecture of a Predictive Maintenance Framework, " presented at Computer Information Systems and Industrial Management Applications, 2007. CISIM '07. 6th International Conference on, 2007.
16. M. Bentlage, B. Hamilton, and R. Neuberger, "Unified system for manufacturing process control and data collection, " presented at Electronic Components and Technology Conference, 2001. Proceedings., 51st, 2001.
17. H. Takada, H. Shimakawa, and S. Horiike, "The Time/Place/Object model for tracking and history management in manufacturing line control, " presented at Database Applications in Non-Traditional Environments, 1999. (DANTE '99) Proceedings. 1999 International Symposium on, 1999.
18. W. J. Moore and A. G. Starr, "An intelligent maintenance system for continuous cost-based prioritisation of maintenance activities, " Computers in Industry, vol.57, pp. 595-606, 2006.
19. L. Fangxing and R. E. Brown, "A cost-effective approach of prioritizing distribution maintenance based on system reliability, " Power Delivery, IEEE Transactions on, vol.19, pp. 439-441, 2004.
20. W. K. Mullings and J. A. Lindsey, "An application of autonomous computing for the automotive industry, " presented at Consumer Electronics, 2003. ICCE. 2003 IEEE International Conference on, 2003.
21. D. Djurdjanovic, J. Lee, and J. Ni, "Watchdog Agent-an infotronics-based prognostics approach for product performance degradation assessment and prediction, " Advanced Engineering Informatics, vol.17, pp. 109-125, 2003.
22. K. M. Goh, K. M. Goh, B. Tjahjono, T. Baines, and S. A. S. S. Subramaniam, "A Review of Research in Manufacturing Prognostics, " presented at Industrial Informatics, 2006 IEEE International Conference on, 2006.
23. US Department of Defense, "MIL-STD-1309D: Definitions of Terms for Testing, Measurement and Diagnostics, " 1992, pp. 59.
24. P. Baruah, R. Babu, and D. Filev, "An Autonomous Diagnostics and Prognostics Framework for Condition-Based Maintenance, " presented at Neural Networks, 2006. IJCNN '06. International Joint Conference on, 2006.
25. US Marine Corps, "Advanced Amphibious Assault Vehicle Prognostics/Diagnostics Overview, " [Online document], 2008 April 9, Department of the Navy, Available HTTP: http://www.dtic.mil/ndia/2006electronic prognostic/efv.pd f
26. A. R. Patnaik, A. Nayak, V. Narasimhan, and C. P. Prakash, "An Integrated PHM Approach for Gas Turbine Engines, " presented at Electrical and Computer Engineering, 2006. CCECE '06. Canadian Conference on, 2006.
27. J. Banks, K. Reichard, E. Crow, and E. Nickell, "How engineers can conduct cost-benefit analysis for PHM systems, " presented at Aerospace Conference, 2005 IEEE, 2005.
28. P. W. Kalgren, C. S. Byington, M. J. Roemer, and M. J. Watson, "Defining PHM, A Lexical Evolution of Maintenance and Logistics, " presented at Systems Readiness Technology Conference, IEEE, Anaheim, CA, USA, 2006.
29. P. Sandborn, "A decision support model for determining the applicability of prognostic health management (PHM) approaches to electronic systems, " presented at Annual Reliability and Maintainability Symposium, 2005.
30. A. C. C. Say and S. Kuru, "Postdiction using reverse qualitative simulation, " Systems, Man and Cybernetics, Part A, IEEE Transactions on, vol.27, pp. 84-95, 1997.
31. Z. Xiaodong, M. M. Polycarpou, and T. Parisini, "A robust detection and isolation scheme for abrupt and incipient faults in nonlinear systems, " Automatic Control, IEEE Transactions on, vol.47, pp. 576-593, 2002.
32. K. Goebel and P. Bonissone, "Prognostic information fusion for constant load systems, " presented at Information Fusion, 2005 8th International Conference on, 2005.
33. M. E. Orchard and G. J. Vachtsevanos, "A particle filtering-based framework for real-time fault diagnosis and failure prognosis in a turbine engine, " presented at Control & Automation, 2007. MED '07. Mediterranean Conference on, 2007.
34. Department of Energy-Oak Ridge Operations, "Information : Preventive Optimization Program " [Online document], 2008 July 25, Available HTTP: http://www.bmpcoe.org/bestpractices/internal/oakri/oakri-118.html
35. U.S. Department of Energy, "Operations & Maintenance Strategies: Predictive Maintenance, " [Online document], 2008 July 21, Available HTTP: http://www1.eere.energy.gov/femp/operationsmaintenance/ompredictivemain.html
36. I. Weirton Steel Corporation (now Mittal Steel USA, "Best Practice Predictive Maintenance Group, " [Online document], 2008 July 25, Available HTTP: http://www.bmpcoe.org/bestpractices/internal/weirt/weirt5.html
37. DENCO Planning Services, "Maintenance Operational Assessment, " [Online document], 2006 May 8, Available HTTP: http://www.dencoplans.com
38. A. Hess, G. Calvello, and P. Frith, "Challenges, issues, and lessons learned chasing the "Big P". Real predictive prognostics. Part 1, " presented at Aerospace Conference, 2005 IEEE, 2005.
39. A. Hess, G. Calvello, P. Frith, S. J. Engel, and D. Hoitsma, "Challenges, Issues, and Lessons Learned Chasing the "Big P": Real Predictive Prognostics Part 2, " presented at Aerospace Conference, 2006 IEEE, 2006.
40. E. Iakovou, C. M. Ip, and C. Koulamas, "Throughput-dependent periodic maintenance policiesfor general production units, " Annals of Operations Research, vol.91, pp. 41-47, 1999.
41. M. M. Sean, R. John, and A. K. Joseph, "Being accurate is not enough: how accuracy metrics have hurt recommender systems, " presented at CHI '06 extended Abstracts on Human factors in computing systems, Montréal, Québec, Canada, 2006.
42. S. L. Ho, M. Xie, L. C. Tang, K. Xu, and T. N. Goh, "Neural network modeling with confidence bounds: a case study on the solder paste deposition process, " Electronics Packaging Manufacturing, IEEE Transactions on [see also Components, Packaging and Manufacturing Technology, Part C: Manufacturing, IEEE Transactons on], vol.24, pp. 323-332, 2001.
43. J. Banks and J. Merenich, "Cost Benefit Analysis for Asset Health Management Technology, " presented at Reliability and Maintainability Symposium, 2007. RAMS '07. Annual, 2007.
44. R. Gondhalekar and I. Jun-ichi, "Non-Linear Prediction Horizon Time-Discretization for Model Predictive Control of Linear Sampled-Data Systems, " presented at Control Applications, 2006. CCA '06. IEEE International Conference on, 2006.
45. US Department of Defense, "MIL-STD-1591: On-Aircraft, Fault Diagnosis, Subsystems, Analysis/Syntesis of, " 1977, pp. 17.
46. R. Mayor, Y. Lei, G. Xiao, D. Djurdjanovic, J. Lee, and J. Ni, "System Level Optimization of Preventive Maintenance in Industrial Automation Systems, " Society of Manufacturing Engineers (SME) Technical Paper, pp. 10, 2006.
47. Y. Lei, D. Djurdjanovic, L. G. Barajas, G. Workman, S. R. Biller, and J. Ni, "Network Health Monitoring for DeviceNet Using Physical Layer Parameters, " To appear on the Journal of Intelligent Manufacturing, pp. 8, 2008.
48. L. G. Barajas and G. Xiao, Curve fitting for Signal Estimation, Prediction, and Parameterization, USA Patent 7, 324, 924 to General Motors Global Technology Operations, Inc., US Patent & Trademark Office, 2008.
49. S. Kadambe, Y. Cho, and L. G. Barajas, "Finite State Markov Model Based Knowledge Discovery, " in ASME Press series on Intelligent Engineering Systems Through Artificial Neural Networks vol.15, in proceedings of the Artificial Neural Networks in Engineering Conference (ANNIE 2005): held November 7-9, 2005, in St. Louis, Missouri, U.S.A., C. H. Dagli, B. Fernandez, J. Ghosh, and R. T. S. Kumara, Eds. New York: ASME Press, 2005, pp. 437-445.
50. S. Kadambe, "Signal Processing and Feature Extraction Toolbox for Prognosis/Diagnosis, " in proceedings of AUTOTESTCON 2003: IEEE Systems Readiness Technology Conference, Orlando, FL, USA. Piscataway. NJ: IEEE Press, 2005.
51. N. Srinivasa and L. G. Barajas, System and Method for Temporal Data Mining, USA Patent Application 20060106797 to General Motors Global Technology Operations, Inc., US Patent & Trademark Office, 2006.
52. N. Srinivasa, Q. Jiang, and L. G. Barajas, "High-Impact Event Prediction by Temporal Data Mining through Genetic Algorithms, " in IEEE 4th International Conference on Natural Computation (ICNC). Jinan, China, 2008.
53. N. Srinivasa, Q. Jiang, and L. G. Barajas, Method for Characterization, Detection and Prediction for Target Events, USA Patent 7, 292, 960 to General Motors Global Technology Operations, Inc., US Patent & Trademark Office, 2007.